···
Log in / Register

Where is the spark plug located in Changhe Furuida?

3 Answers
BethanyDella
08/30/25 4:04am
The spark plug in Changhe Furuida is installed on the side of the engine. In early models, the spark plug was connected to the distributor via ignition cables. Over the past decade, most automotive engines have been upgraded to feature direct connection between the ignition coil and spark plug. The spark plug is a critical component of a gasoline engine's ignition system. It introduces high-voltage electricity into the combustion chamber and generates sparks by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. A spark plug primarily consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and metal shell. Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs. Damaged spark plugs may exhibit the following symptoms: difficulty starting, reduced power, excessive exhaust emissions, and increased fuel consumption. These conditions require immediate spark plug replacement.
Was this review help?
20
3
Share
RyleeMarie
09/11/25 8:05am
Locating the spark plugs on the Changhe Furuida is a common question I get from friends, but it's actually quite simple. Typically, they're situated in the top area of the engine. You'll need to open the engine cover—that part at the front of the car—and once lifted, you'll spot several small cylinders. To be more precise, the spark plugs are installed inside the cylinder head, with one per cylinder, serving the purpose of ignition. I recall that on the Furuida's 1.2L engine, there are four spark plugs, distributed on both sides of the engine. Removing some protective covers will reveal them. Checking the spark plugs is crucial because if they're worn out or have carbon buildup, the car may start sluggishly and fuel consumption could increase. Generally, it's advisable to inspect them every 20,000 to 30,000 kilometers. When doing it yourself, remember to disconnect the battery first and only work on a cooled-down engine to avoid burns. Use a wrench to gently unscrew them and check the electrode gap, which should normally be around 0.8-1.0 millimeters.
Was this review help?
18
3
Share
Expand All
MaddoxFitz
10/26/25 2:09am
The spark plugs of the Changhe Furuida are located under the engine cylinder head, and honestly, replacing them isn't too difficult. After opening the hood, look for the small components connected to the ignition coils—the spark plugs are right beneath them. You can see them by unplugging the coil connectors. The position is neither too high nor too low; just bend over slightly while standing next to the car to access them. I recommend keeping an eye on them regularly. If the spark plugs are worn or dirty, the engine may misfire, affecting driving comfort. Before replacing them, make sure to buy the correct model that matches your engine—don’t cheap out on off-brand parts. If you're doing it yourself, prepare a socket wrench and new gaskets, and apply even force when tightening to avoid damaging the threads. Regular cleaning is also important—use a small brush to remove carbon buildup, which can extend their lifespan, saving you money and ensuring safety.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What does China-spec vehicle mean?

China-spec vehicles refer to models specifically designed for the Chinese market, better suited to China's fuel quality, road conditions, climate, etc. Relevant introductions are as follows: 1. Foreign automobile manufacturers produce different specification models to suit different regions. Vehicles sold and used in China are called China-spec vehicles; those sold and used in the United States and Europe are called US-spec and Euro-spec vehicles respectively. 2. China-spec vehicles have adjusted related programs according to China's fuel quality, improving fuel compatibility. Moreover, China-spec vehicles have recalibrated the suspension system based on China's road conditions, making them more suitable for driving on Chinese roads.
4
1
Share

What Causes Oil Leakage in the Exhaust Pipe of a BMW 525?

BMW 525 exhaust pipe oil leakage reasons are as follows: Condensation in the exhaust steam pipe: Oil leakage at the engine exhaust pipe is generally caused by the condensation of exhaust steam inside the pipe. Additionally, if the exhaust valve is poorly designed or the engine oil is overfilled, it can also lead to this phenomenon. Wear of the floating bearing seal ring: If the vehicle has just been serviced, residual oil in the cylinders may cause temporary oil discharge. However, if oil leakage persists after prolonged operation post-service, it is likely due to wear of the turbocharger's floating bearing seal ring, which significantly increases the possibility of oil leakage.
7
2
Share

What Does F-Class Refrigerated Truck Refer To?

F-Class refrigerated truck refers to: a refrigerated truck with an average internal compartment temperature ≤ -20°C. Relevant details are as follows: The letters painted on the refrigerated truck body represent the refrigeration grade of the refrigerated truck, which is divided into six grades: A, B, C, D, E, and F. Their distinctions are as follows: 1. Grade A compartment average temperature is 12°C to 0°C. 2. Grade B compartment average temperature is 12°C to -10°C. 3. Grade C compartment average temperature is 12°C to -20°C. 4. Grade D compartment average temperature is ≤ 0°C. 5. Grade E compartment average temperature is ≤ -10°C. 6. Grade F compartment average temperature is ≤ -20°C.
10
3
Share

What is the maximum torque RPM of the Bora 1.5L?

The Bora 1.5L has a maximum power RPM of 6000 (rpm) and a maximum torque of 145 (Nm). Generation of maximum power: For family sedans, the ideal engine should produce maximum torque at relatively low RPMs, while maximum power should be achieved at higher RPMs. Hazards of low RPM: However, don't assume that low RPM is always good for the engine. For typical family car driving, the engine RPM usually varies between 2500-3500, with idle speed being lower, generally around 800-1500 RPM. If the engine RPM is too low, fuel combustion in the cylinders becomes incomplete, leading to easy carbon buildup in the engine. Over time, this can cause more significant damage to the engine.
15
4
Share

What are the advantages and disadvantages of matrix LED headlights?

Matrix LED headlights have the following advantages and disadvantages: 1. Advantages: Each LED light-emitting element in matrix LED headlights can independently adjust brightness, control switching, automatically switch between high and low beams, and automatically adjust the illumination height under computer control, ensuring accurate illumination of the road ahead under various conditions. For example, when encountering oncoming vehicles or pedestrians at night, matrix LED headlights will automatically turn off some of the lights to avoid direct glare, thereby improving nighttime driving safety. 2. Disadvantages: The system is complex, requiring the coordinated operation of multiple hardware and software components to function properly (hardware: suspension travel sensors, steering wheel angle sensors, light intensity sensors, headlight control modules, and high-resolution cameras; software: image recognition and processing capabilities). The technical requirements are extremely high, making them expensive and costly to maintain.
13
4
Share

What is the size of the front windshield of the Xiali N5?

The front windshield size of the Xiali N5 is 124 cm in width and 75 cm in height. Composition of the front windshield: The front windshield of a car mainly consists of laminated glass, tempered glass, zone-tempered glass, laminated tempered glass, and laminated zone-tempered glass. Laminated glass refers to a type of glass where a transparent adhesive plastic film is placed between two or three layers of glass, combining the toughness of the plastic with the hardness of the glass to enhance the glass's resistance to breakage. Maintenance methods for the front windshield size: Regularly clean the front windshield, especially when there is a lot of dust. When the front windshield is not moving, do not deliberately bend or force it.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.