Where is the spare tire placed in the Hongguang MINIEV?

What to Do When Encountering Emergencies While Driving?

Solutions for emergencies encountered while driving: 1. Brake failure: During driving, due to improper driving methods or poor vehicle quality, brake failure can easily occur. Once brake failure happens, the first priority is to stop the vehicle by any means possible. Avoid keeping the car in a high gear; you can press the accelerator briefly to shift to a lower gear, then gradually reduce the accelerator. During this series of operations, also pay attention to the direction of the vehicle to avoid harming pedestrians. 2. Skidding: While driving, especially on rainy days, skidding is particularly prone to occur. If skidding happens, to prevent the vehicle from rolling over, the first step is to reduce speed by gradually easing off the accelerator, then correct the steering wheel in the opposite direction of the skid until the skid stops, before resuming normal driving.

1

5

Share

Are There Different Specifications and Models for Antifreeze?

Antifreeze does not have different specifications or models. Below are the detailed descriptions of antifreeze: 1. Freezing Point: Ordinary antifreeze can reach -40°C, while high-quality antifreeze can reach around -60°C. This is an important indicator to measure the quality of antifreeze. 2. Boiling Point: The boiling point of antifreeze should be above 108°C, and high-quality antifreeze can exceed 110°C. The lower the freezing point, the higher the boiling point. Here is additional information about the functions of antifreeze: 1. Heat Dissipation: Antifreeze, also known as antifreeze coolant, can cool and dissipate heat for the engine, transmission, turbocharger, etc. 2. Freeze Protection: It prevents the coolant from freezing in winter, which could otherwise expand and crack the radiator or damage the engine block or cylinder head. 3. Corrosion Prevention: Antifreeze has functions such as corrosion prevention, rust removal, and scale prevention.

9

0

Share

What is the ground clearance of the 2019 CR-V?

2019 CR-V has a minimum ground clearance of 135mm. Here is some related information about the 2019 CR-V: 1. Specifications of the 2019 CR-V: The 2019 CR-V is a classic urban SUV model produced by Dongfeng Honda. It is equipped with Michelin Latitude series SUV tires and comes with two re-tuned engines: 2.0L and 2.4L. The 2.0L dual overhead camshaft i-VTEC engine delivers a maximum power of 110 kW and a maximum torque of 190 Nm. In terms of safety, the CR-V features SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pretensioners and load limiters. 2. Body dimensions of the 2019 CR-V: The 2019 CR-V measures 4630mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2620mm.

16

0

Share

What are the regulations on vehicle scrapping age limits?

Non-commercial vehicles and commercial vehicles have different scrapping age limits, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage age limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage age limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping age limit of 8 years, medium-sized taxi passenger vehicles have a limit of 10 years, and large taxi passenger vehicles have a limit of 12 years. Public transport passenger vehicles have a scrapping age limit of 13 years, other small and micro commercial passenger vehicles have a limit of 10 years, and large and medium-sized commercial passenger vehicles have a limit of 15 years. Micro commercial trucks have a scrapping age limit of 8 years, light and large commercial trucks have a limit of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. The registration office accepts the application and issues a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age. For vehicles that have not reached the scrapping age, after inspection by the motor vehicle inspection office and confirmation that they meet the scrapping standards, a "Vehicle Scrapping Notice" is issued. The vehicle owner chooses a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company dismantles the vehicle and takes photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner submits the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates are then reclaimed, and the scrapping registration is processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle cannot be driven back to the registration location due to damage, the owner may sell the scrapped vehicle to a local motor vehicle recycling company. Commercial vehicles converted to non-commercial use must be scrapped according to the original commercial vehicle scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner may apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application must meet the following conditions: (1) submitted within six months after the transfer or cancellation; (2) the owner must have owned the original vehicle for more than three years.

9

5

Share

What is the fuel consumption of the Nissan Kicks?

The fuel consumption of the Nissan Kicks is approximately 5.6L/100km. Below is an introduction to the Nissan Kicks: 1. Nissan Kicks: The Nissan Kicks is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum horsepower of 124 hp, a maximum power of 91 kW, and a maximum torque of 153 N·m. 2. Displacement and Fuel Consumption: For small-displacement naturally aspirated engines, fuel consumption is inherently low. If you drive steadily, the car can be very fuel-efficient. Below are some extended tips on how to save fuel: 1. Good Driving Habits: It is essential for drivers to maintain good driving habits. If a driver frequently engages in aggressive driving, such as heavy acceleration and hard braking, the engine load will increase, leading to higher fuel consumption. Conversely, if the driver drives smoothly, with gentle acceleration and braking, the engine will operate more steadily, resulting in lower fuel consumption. 2. Fuel Quality: Always try to use high-quality fuel when refueling. High-quality fuel not only burns more efficiently, reducing fuel consumption, but also helps extend the engine's lifespan to some extent.

16

3

Share

What causes abnormal noise when stepping on the accelerator?

The reasons for abnormal noise when stepping on the accelerator are as follows: 1. Loose dashboard or console: During operation, the engine needs to intake a large amount of air. If the air is not filtered, suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring." The air filter, installed in front of the carburetor or intake pipe, filters out dust and sand particles from the air, ensuring sufficient and clean air enters the cylinder. 2. Clutch malfunction: Another method is to pull out the oil dipstick and check if the abnormal noise persists when stepping on the accelerator. If not, it might be a clutch issue. The turbocharger generates compressed airflow noise during operation. When the engine is revving up or the accelerator pedal is pressed deeply, the engine noise becomes louder. To avoid this, press the accelerator gently and avoid flooring it suddenly, as abruptly pressing it all the way down can cause such abnormal noise.

19

1

Share

Where is the spare tire placed in the Hongguang MINIEV?

What to Do When Encountering Emergencies While Driving?

Are There Different Specifications and Models for Antifreeze?

What is the ground clearance of the 2019 CR-V?

What are the regulations on vehicle scrapping age limits?

What is the fuel consumption of the Nissan Kicks?

What causes abnormal noise when stepping on the accelerator?

How long after temporary license plates can you get official ones?

When was the Leapmotor S01 launched?

What level is the Mazda CX4?

Can a 60-year-old person still obtain a driver's license?