Where is the spare tire of the Roewe RX5 located?

2 Answers
AndresLee
07/24/25 6:35am
The spare tire of the Roewe RX5 is located in the trunk, beneath the onboard tool kit. To access it, lift the trunk liner, hang the liner handle on the drainage channel, remove the onboard tool kit, loosen the spare tire locking knob, and then you can take out the spare tire. Taking the 2020 Luxury Edition Roewe RX5 as an example, its body dimensions are: length 4571mm, width 1855mm, height 1719mm, with a wheelbase of 2708mm. The 2020 Luxury Edition Roewe RX5 features a MacPherson strut front suspension and a semi-independent trailing arm rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 173PS, a maximum power of 127kW, and a maximum torque of 275Nm, paired with a 6-speed manual transmission.
Was this review help?
6
1
Share
ArielFitz
08/11/25 2:21am
After driving the Roewe RX5 for two years, the spare tire is basically stored under the floor of the trunk. You can see it by lifting the large mat, and there's also a tool kit next to it containing the jack and wrench. The location is well-designed, saving space and keeping dust out. I mostly drive in the city, but it came in handy when I had a flat tire last week. It was easy to take out, but the spare tire is quite small, so I wouldn’t recommend using it for long trips. By the way, tire pressure checks are important—I measure the pressure every six months and keep it at the recommended value to avoid unexpected issues on the road. Also, the space is a bit tight, so don’t pile too many things on top of it. Overall, the spare tire location is practical but requires regular maintenance.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Where is the Santa Fe engine number located?

The Santa Fe engine number is located on the left side of the engine, in the middle below the third cylinder spark plug. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
1
0
Share

Do I have to retake the entire test if I fail one item in Subject 2?

If you fail one item in the Subject 2 test, you will have to retake the entire test. Here is more information about Subject 2: Test content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For small cars (C1/C2), the test items include five mandatory components: reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as the S-curve). Some regions may also include a sixth item: highway toll card collection. Passing criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points.
15
1
Share

What is the Standard for a Three-Stage Car Wash Sedimentation Tank?

The standard for a three-stage car wash sedimentation tank is that the masonry strength must meet requirements, the slope must be strictly controlled, and reverse slopes are not allowed. Below is relevant information about three-stage sedimentation tanks: 1. Principle: Sedimentation tanks utilize the principle that when the downward sedimentation speed of suspended impurity particles in the water flow is greater than the flow velocity of the water moving upward, or when the downward sedimentation time is less than the time it takes for the water to flow out of the sedimentation tank, the particles can separate from the water flow to achieve water purification. 2. Construction requirements: Use an excavator to level the site, ensuring there are no debris. Use a total station to measure and mark out the precise location of the sedimentation tank. Use an excavator to dig the sedimentation tank, with a digging depth of 2.4m, length of 9.5m, and width of 4.8m.
20
0
Share

What are the new regulations for elderly scooters on the road?

According to the non-motor vehicle registration station, elderly scooters in Beijing are currently not allowed on the road and cannot be licensed. Here is some information about filing non-personal motor vehicles on 12123: Notes: The vehicle to be filed must be a small car or a small new energy vehicle. Users can only file up to 3 non-personal motor vehicles at the same time, and the same motor vehicle can be filed by a maximum of 3 non-owner users at the same time. Filing methods: The first method is to scan the QR code of the vehicle to be filed, take relevant photos as prompted, fill in detailed information, and enter the SMS verification code of the owner of the vehicle to be filed. The second method only requires entering the SMS verification code of the owner of the vehicle to be filed, and the system will automatically approve it in the background.
9
2
Share

Is Shock Absorber Housing Repair a Major Accident?

Shock absorber housing repair is a major accident. Here is relevant information about 4S dealerships: Business scope of 4S dealerships: For a brand in a region, there are usually several 4S dealerships, primarily determined by the city's scale. Competition exists among these dealerships even though they represent the same brand. Currently in China, standard 4S dealerships only exist in cities at municipal level or above, while some county-level cities don't have automotive 4S dealerships. Characteristics of 4S dealerships: They are established according to manufacturers' unified standards with consistent models. Authorized by manufacturers, they can only sell single-brand vehicles. Within the manufacturer's permitted pricing range, they attract customers with the most competitive prices to reflect brand value and maintain brand reputation. However, it's important to understand correctly that 4S dealerships shouldn't be regarded as automobile manufacturers themselves.
10
1
Share

Reasons for Subaru Idle Vibration After Overhaul?

Subaru idle vibration after overhaul may be caused by carbon deposits on the throttle idle motor. It is necessary to clean the throttle carbon deposits, which can be done at a maintenance point. Idle refers to the operation of the engine without load, only overcoming the friction resistance of its internal components, without external power output. The minimum speed to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of the engine. When adjusting the idle speed, the speed should not suddenly increase or decrease, otherwise it will cause early wear of the engine. Idle speed can be adjusted by changing the throttle opening size and idle fuel supply. Generally speaking, the best idle speed is the minimum speed at which the engine does not vibrate within the idle range and has good acceleration performance. The phenomenon of idling is that the car is stationary while the engine is running "thumpingly," burning fuel in vain, which is indeed a waste. At this time, the mechanical work generated by gasoline combustion is consumed by the friction of internal parts.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.