Where is the spare tire of the Elysion located?

Can You Step on the Gas in First Gear?

You can step on the gas in first gear. When starting the car and the clutch is not fully released, gently press the accelerator. Of course, sometimes you can start without stepping on the gas, but at this time, the engine speed is not very high, or if the road surface is not very smooth, it can easily cause the engine to stall. Therefore, when starting in first gear, it is necessary to step on the gas appropriately. The reasons why an automatic transmission does not move when shifted are as follows: 1. Torque converter: The torque converter shaft is locked, causing the fuel injection pump to stop working. 2. Lubricating oil: The lubricating oil passage is blocked, leading to insufficient lubrication, which can cause the planetary gear set to burn out. 3. Oil pump shaft: The oil pump shaft is broken, causing the oil pump to stop working or the differential to lack oil and burn out. 4. Transmission: The transmission oil pan is damaged, and all the transmission oil leaks out, causing vehicle problems. 5. Solenoid valve: The transmission valve body or solenoid valve is damaged and not working. 6. Loose linkage: The linkage or cable between the shift control handle and the manual valve rocker arm is loose, keeping the manual valve in the neutral or parking position.

19

5

Share

What car brand has one horizontal and one vertical circle?

A car logo with one circle and one horizontal line is Nissan. The Nissan logo features a circle with a horizontal line running through its center, on which the word "NISSAN" is written, representing "Nissan" in Japanese. Nissan is a Japanese brand primarily producing sedans, SUVs, MPVs, pickup trucks, and commercial vehicles. Automobiles can generally be categorized into six types based on their usage: 1. Sedan: Also known as a passenger car, typically seating no more than nine people (including the driver). 2. Bus: Seating more than nine people (including the driver), including city buses, highway coaches, and tourist buses. 3. Truck: Commonly referred to as a lorry, mainly used for transporting goods. 4. Tractor: Specifically designed for towing trailers or semi-trailers. 5. Specialized transport vehicle: Designed for specific cargo transportation needs, equipped with specialized compartments and corresponding auxiliary equipment, such as dump trucks, tankers, refrigerated trucks, bulk cement trucks, and container trucks. 6. Special-purpose vehicle: Mainly used for completing other tasks, such as ambulances, fire trucks, garbage trucks, sprinklers, and various engineering vehicles.

4

2

Share

What is the actual fuel consumption of the Lynk & Co 02?

1.5t engine consumes approximately 8.5 liters per 100 kilometers, while the 2.0t engine consumes about 9.0 liters per 100 kilometers. The Lynk & Co 02 is a compact SUV equipped with three engines: a low-power version of the 1.5-liter turbocharged engine, a high-power version of the 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. Below are the detailed specifications of the Lynk & Co 02 engines: 1. Low-power version: The low-power 1.5-liter turbocharged engine delivers a maximum power of 115kw and a maximum torque of 245 Nm, with the maximum power achieved at 5000 rpm and the maximum torque available from 1450 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. High-power version: The high-power 1.5-liter turbocharged engine produces a maximum power of 132kw and a maximum torque of 265 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available from 1500 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block.

12

2

Share

What's the matter with no oil on the Yili Cannon?

It may be that the oil pump is clogged or burned out. The function of the gasoline pump is to suck gasoline out of the fuel tank and press it into the float chamber of the carburetor through pipelines and gasoline filters. The following is a detailed introduction to the gasoline pump: 1. It is not affected by air pressure and component wear: The gasoline pump works by using the eccentric wheel on the engine camshaft to drive. The camshaft of the diesel engine is installed in the crankcase, while the camshaft of the gasoline engine is installed on the cylinder head. The eccentric wheel drives the rocker arm, which pulls the diaphragm downward, compressing the spring. At this time, the space above the diaphragm becomes larger, creating negative pressure, which sucks fuel from the inlet. Because the outlet valve is closed, the fuel is stored in the volume above the diaphragm. The oil pump rotor is in contact with gasoline and will not cause wear, only responsible for providing pressure. The regulation of oil pressure is handled by the oil pressure regulator and is unrelated to atmospheric pressure. 2. The control of the gasoline pump is managed by the ECU: The gasoline pump is mainly determined by the ignition switch and the ECU. As long as the engine is running, the oil pump will work. If the engine stops, the interrupted signal will cause the transistor VT not to conduct, the relay L1 not to work, and the oil pump not to work. Even if the engine is not started, as long as the key switch is turned to the on position, the VT control circuit will conduct, generally causing the oil pump to operate for 3-5 seconds before shutting down, setting the pressure in the pipeline in advance.

19

2

Share

What are the reasons for coolant leaking on the ground?

Reasons and solutions for car coolant leakage: 1. Loose sealing at the connection between the antifreeze tank and the radiator. Check for leaks in the coolant pipes, especially at the upper and lower radiator hose connections, the water outlet flange and hose connections on the cylinder head, the heater core connections, the water temperature sensor connections, and other pipe connections. Solution: Generally, applying sealant at the connections, reinstalling the hoses, and replacing the clamps can resolve the issue. 2. Damage to components in the coolant system can cause coolant leakage and high engine temperatures. Faulty components typically include the radiator, heater core, water pump, water outlet flange, and coolant tank (or cap). Solution: Replace the damaged parts. The radiator can be repaired by welding depending on the situation.

20

3

Share

Why Can't the Car Trunk Close Properly?

It might be due to a damaged trunk lock, which can be replaced at a 4S shop. More relevant information is as follows: 1. The trunk structure is very simple, consisting of a motor-driven gear reduction mechanism that moves a rod to operate the trunk's locking mechanism, working similarly to the central door lock. 2. All vehicles must carry a warning triangle in the trunk, which is required during vehicle inspections. Especially in case of a breakdown, the triangle should be set up about 150 meters behind the vehicle to warn approaching traffic. Failure to do so may result in penalties from traffic police. Therefore, it's important to always keep the triangle properly stored and not take it out of the car unnecessarily.

17

1

Share

Where is the spare tire of the Elysion located?

Can You Step on the Gas in First Gear?

What car brand has one horizontal and one vertical circle?

What is the actual fuel consumption of the Lynk & Co 02?

What's the matter with no oil on the Yili Cannon?

What are the reasons for coolant leaking on the ground?

Why Can't the Car Trunk Close Properly?

How to Connect Bluetooth in Buick LaCrosse?

How to Remove the Gear Knob of a Suzuki Swift?

Can 15w40 engine oil be used in sedans?

Can One Car Have Two License Plates?