Where is the spare tire of Roewe RX5?

1 Answers
Edward
07/24/25 9:16pm
Roewe RX5's spare tire is stored inside the trunk, located beneath the onboard tool kit. Operation steps: Flip open the trunk liner, hang the liner handle on the drainage groove, then remove the onboard tool kit, loosen the spare tire locking knob, and then you can take out the spare tire. Additional information: The spare tire of Roewe RX5 is a non-full-size tire, which can only be used as a temporary replacement and should only be used on non-driving wheels. The maximum speed should not exceed 80km/h. Non-full-size spare tires are lighter and smaller, not occupying much trunk space. The reduced weight of non-full-size spare tires means slightly lower fuel consumption, thereby providing more power. Being smaller than regular tires, non-full-size spare tires do not take up much rear space and also lower the cost.
Was this review help?
19
5
Share
More Forum Discussions

What Causes the Idle Vibration in Roewe 350?

Here are the specific reasons for the idle vibration in Roewe 350: 1. Shock Absorber System Failure: The shock absorber system is primarily responsible for filtering out the vibrations generated by the engine during operation. If there is an issue with the shock absorbers, these vibrations will directly transmit to the steering wheel and the cabin, affecting driving. When the engine is idling, turning on the vehicle's electrical systems can also easily cause vibrations. The engine's load increases due to the activation of electrical components, leading to a drop in idle speed. To compensate for the vibration caused by the idle speed drop, the engine automatically increases the RPM. 2. Unstable Oil Pressure: Check whether the fuel supply pressure and the intake pressure sensor are functioning normally. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can cause body vibration. 3. Cold Start: The main reason for body vibration during a cold start is incomplete fuel combustion, resulting in insufficient power. The ignition energy is relatively low during startup, and when the temperature of fuel and lubricants is low, more throttle input is required to meet power demands. Over time, the spark plug's electrode gap gradually increases, leading to reduced ignition energy and poor fuel atomization, which causes body vibration. Additionally, aging ignition coils, high-voltage wires of spark plugs, or electrical leakage can also result in decreased ignition energy.
3
4
Share

What is the reason for the failure of the Arrizo 7 sunroof switch?

The failure of the sunroof switch is mostly due to a malfunction of the switch controller. Simply remove the cover clips, take out the faulty switch controller, replace it with a new one, and secure the cover back in place. The car sunroof is installed on the roof, effectively promoting air circulation inside the vehicle and increasing the intake of fresh air. Additionally, the sunroof can provide a broader view and meet the needs of mobile photography and videography. Advantages of a car sunroof: 1. Cooling: The effect of lowering the interior temperature through the sunroof is faster than using the air conditioning. As the car moves, negative pressure forms on the roof, drawing out hot air from the interior, thus achieving rapid cooling. Experimental data shows that sunroof cooling is 2-3 times faster than air conditioning. 2. Ventilation: During high-speed driving, air flows rapidly near the sunroof. When the sunroof is opened, a negative pressure zone forms on the roof. The difference in air pressure inside and outside the car helps expel stale air, ensuring fresh air circulation while avoiding increased fuel consumption from opening windows at high speeds. 3. Assisting in defogging: When there is a significant temperature difference between the inside and outside of the car, condensation forms on the windows. Fog on the windshield can severely obstruct the driver's vision. Opening the sunroof to the rear-vent position quickly eliminates windshield fogging.
4
3
Share

Why Does the Car Stall in Neutral?

Reason may be insufficient battery power in the car's ignition system, replacing it with a new battery should solve the issue. Below is relevant information about gear positions: 1. Concept: Gear positions are adjustment devices that regulate the speed and traction (torque) of a car. The lower the gear, the slower the speed, but the greater the car's traction (torque). The higher the gear, the faster the speed, but the smaller the car's traction (torque). Gears are generally divided into two main categories: forward gears and reverse gear. Engaging a forward gear makes the car move forward; engaging reverse gear makes the car move backward. 2. Common car gear positions: Generally, ordinary cars have five forward gears and one reverse gear. The first forward gear is the starting gear, where the speed is the slowest (0-10 km/h), but the torque is the greatest.
15
1
Share

Should the Foot Be Placed on the Brake During Subject Two?

During Subject Two, the foot should be placed on the brake. Below is relevant information about Subject Two: Required Materials for Application: The applicant needs to register at the driving school and submit materials such as an ID card and a medical examination form. The driving school will then collectively submit these materials to the vehicle management office for processing. Only after this can the applicant proceed with self-scheduling. Currently, self-scheduling is available from Subject One to Subject Four. Subject Two Test Items: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. The test items for cars include five mandatory tests: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves.
13
2
Share

What is A Maintenance?

A Maintenance and B Maintenance are service codes for vehicle maintenance. A Maintenance is a minor service, while B Maintenance is a major service. Below are additional details: 1. Minor service content: A minor service generally refers to the routine maintenance items performed within the manufacturer's specified time or mileage to ensure vehicle performance. It mainly includes changing the engine oil and oil filter. 2. Minor service interval: The interval for a minor service depends on the effective time or mileage of the engine oil and oil filter used. The validity periods of mineral oil, semi-synthetic oil, and full-synthetic oil vary by brand and grade, so please follow the manufacturer's recommendations. Oil filters are generally divided into conventional and long-life types. Conventional oil filters are replaced along with the oil, while long-life oil filters have a longer service life.
4
3
Share

Is it necessary to replace the clutch flywheel?

If the clutch flywheel is damaged, it must be replaced immediately. The function of the clutch: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission. The clutch is a common component in mechanical transmission, allowing the drivetrain to be separated or engaged at any time. Basic requirements for the clutch: The clutch should engage smoothly and separate quickly and completely; it should be easy to adjust and repair; it should have a small external size; be lightweight; have good wear resistance and sufficient heat dissipation capacity.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.