Where is the spare tire of GAC Trumpchi GM6 located?

1 Answers
IkerRose
07/30/25 7:29am
GAC Trumpchi GM6's spare tire is located under the front seats. Lift the floor mat and pull the handle of the cover to access it. The purpose of a spare tire is to temporarily replace a damaged tire during driving. Since the spare tire and the original tire were manufactured at different times, they differ in terms of aging, hardness, lifespan, and deformation. Therefore, prolonged use of the spare tire is unsafe, and it should be promptly replaced with an original tire after emergency use. The Trumpchi GM6 is an MPV model under GAC Trumpchi, with dimensions of 4780mm in length, 1860mm in width, and 1730mm in height, and a wheelbase of 2810mm. The vehicle features a bold large-mouth grille design, relatively smooth body lines, and a stylish full-width taillight design combined with a floating roof style, exuding a strong business atmosphere.
Was this review help?
4
0
Share
More Forum Discussions

Why is there no pressure in the low-pressure side of a car's air conditioning system?

Here are the reasons for no pressure in the low-pressure side of a car's air conditioning system: Damage to the outdoor unit of the car air conditioning: If the fan of the outdoor unit is damaged, it will result in excessively high exhaust temperature or pressure; if the internal fan is damaged, it will cause frost formation, and at this point, it's necessary to replace the damaged internal or external fan. Failure of the compressor's capacitor: When both the internal and external units of the car are operating, but the compressor does not rotate, it will lead to overheating. In this case, it's necessary to check whether the compressor capacitor has poor contact or is damaged, and replace it promptly if damaged. Reversed live and neutral wires of the air conditioning power supply: This phenomenon usually occurs only during the installation of the car air conditioning, requiring the owner to reconnect the live and neutral wires.
17
3
Share

What are the starting steps for the Accord?

Accord starting steps: Press the one-touch start button while stepping on the brake. If you press the one-touch start button without stepping on the brake, this is considered a partial power-on state where you cannot roll the windows up or down or play music. Pressing the one-touch start button a second time without stepping on the brake will fully power on the vehicle and initiate a self-check, allowing all vehicle functions to operate normally, but the vehicle still cannot be started. Pressing the one-touch start button a third time without stepping on the brake will completely power off the vehicle. In terms of body dimensions, the 2018 Accord measures 4893 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm. The gasoline models are all equipped with a 1.5T inline 4-cylinder turbocharged engine, available in high and low power versions, all paired with a CVT continuously variable transmission.
8
4
Share

What type of tire pressure monitoring device does the new Lavida have?

The new Lavida is equipped with an indirect tire pressure monitoring system. When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors tire pressure. The dimensions of the new Lavida are 4605 mm in length, 1765 mm in width, and 1460 mm in height, with a wheelbase of 2610 mm. The new Lavida offers two engine options: a 1.6L naturally aspirated engine and a 1.4TSI engine. For the transmission system, the 1.4T engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission, while the 1.6L model comes with a combination of a 5-speed manual and a 6-speed automatic transmission.
5
3
Share

Why does the engine malfunction indicator light come on when the car's air conditioning is turned on?

The reasons why the engine malfunction indicator light comes on when the car's air conditioning is turned on are as follows: Sensors: The engine malfunction indicator light will come on when the sensors are damaged, have poor contact, or experience signal interruption. Engine: Poor engine maintenance is the most common cause of the engine malfunction indicator light coming on. Therefore, it is recommended that car owners perform regular maintenance and maintain good driving habits, otherwise it will increase the burden on the engine operation. Poor quality fuel and engine oil: If not added as required, it will cause engine wear over time, leading to the engine malfunction indicator light coming on. Generally, manufacturers will recommend which grade of fuel and which type of engine oil to use.
9
1
Share

Is the Jialing 70 a two-stroke or four-stroke engine?

Jialing 70 is a four-stroke engine with chain drive. The relevant introduction of four-stroke engines is as follows: Definition of four-stroke engine: A four-stroke engine refers to an engine where the crankshaft completes one working cycle by rotating twice, going through four strokes: intake, compression, power, and exhaust. In contrast, a two-stroke engine only requires the crankshaft to rotate once and go through two strokes to complete a working cycle. Precautions for selecting engine oil: It is particularly important to remind that when purchasing, you should clearly communicate to the seller that you need four-stroke gasoline engine oil to avoid buying two-stroke engine oil or diesel engine oil.
4
2
Share

Why do the engine and oil lights come on simultaneously and the car won't start?

When the vehicle is turned off, these two indicator lights remain illuminated, which doesn't indicate any specific issue. If the vehicle fails to start, the following aspects should be checked: Battery voltage: Check whether the battery voltage is normal (starting voltage should be greater than 9.8V). Ignition coil inspection: Measure whether there is power supply, grounding, and signal at the ignition coil. Simultaneously, check for signal and power supply at the fuel injector (if there is no power supply, locate the corresponding fuse; if there is no signal, measure the crankshaft and camshaft sensor signals or the anti-theft system. First, use a decoder to read if there are any corresponding fault codes).
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.