Where is the spare tire located on the GL8?

2 Answers
DiLincoln
09/02/25 2:57am
The spare tire of the GL8 is located under the trunk floor. Additional information: 1. GL8 Overview: The dimensions of this vehicle are 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. The GL8 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. While multi-link suspensions offer better comfort than torsion beam suspensions, they are also more expensive. 2. GL8 Powertrain: The GL8 is equipped with a 2.0L turbocharged engine, model code LSY. This engine delivers a maximum power of 174kW and a peak torque of 350Nm, with maximum torque available between 1500 to 4000 rpm and maximum power at 5000 rpm. It is paired with a 9-speed automatic transmission (9AT), which enhances gearshift smoothness and improves fuel efficiency.
Was this review help?
10
3
Share
SaraRose
09/14/25 5:16am
Last time I went on a trip driving the GL8, I had a flat tire and had to urgently find the spare. It was hanging underneath the car, a dark object that required a specialized crank to slowly lower it. The tool kit was under the trunk mat, containing a wrench and a hook. I squatted and struggled for several minutes to get it done—the whole process was quite cumbersome, especially when the ground was wet and slippery in the rain. Remember to park on level ground, engage the handbrake, and then proceed. Also, check the spare tire pressure during regular maintenance to avoid finding it flat when needed. Although the GL8's design saves space, extracting the spare requires extra patience.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Clean Car Air Conditioner with Cleaning Agent?

Spray the cleaning agent directly onto the entire aluminum fin of the air conditioner. There's no need to spray too much. Once the foam and dirt come out, rinse thoroughly with plenty of clean water. Specific steps are as follows: 1. Blow Dryer: If the air filter is not very dirty, you can use a blow dryer to clean the air filter from the inside out. Also, make sure to install it according to the arrow direction during installation; otherwise, the air filter will not only fail to function but also blow dust into the car. 2. Clean the Duct: Spray the well-shaken cleaning agent towards the position of the air filter. The suction inside will draw the cleaning agent in, thereby cleaning the air conditioner duct. It's particularly important to note that the hose on the cleaning agent should not be too close to the blower to avoid being sucked in.
17
4
Share

Is 200 Horsepower Considered High?

A 200-horsepower engine can be considered quite powerful when installed in a compact car. However, if equipped in a larger vehicle, it might feel somewhat inadequate. Therefore, the performance level of 200 horsepower largely depends on the vehicle type, though it is generally sufficient for urban driving. Factors influencing a car's power include: 1. Vehicle Weight Generally, with the same engine efficiency, lighter cars tend to feel more powerful. 2. Tires Differences in tire friction can affect power output. For example, F1 race cars often use 'slick tires' to minimize friction with the ground. 3. Transmission The quality of the transmission directly impacts the car's power performance. Cars with higher gear ratios tend to have more efficient power output. 4. Aerodynamics Vehicles designed with better aerodynamics experience less wind resistance. For instance, a sedan and an SUV with the same horsepower will have different acceleration capabilities, with the sedan typically being faster.
9
5
Share

What is the fuel consumption and range of the Yamaha NMAX155?

This model has a fuel consumption of 2.0 liters per 100 kilometers at economical speed, with a range of 200KM. Here is some information about the Yamaha NMAX155: Engine: This scooter is equipped with a single-cylinder water-cooled SOHC-4 valve engine, delivering a maximum power of 11.3kW (8000r/min) and a maximum torque of 13.7N-m (6500r/min), which performs very well in its class. Braking system: As a product focused on handling and sportiness, the configuration of single-piston calipers with 230mm brake discs at both front and rear is not particularly outstanding. In actual emergency braking tests, this braking system performs averagely.
11
0
Share

How many models does the Yamaha YBR150 have?

There are two models of the Yamaha YBR150, one with disc brakes and one with drum brakes. Here is some information about the Yamaha YBR150: Appearance: The overall appearance may not be the most stylish, but the sharp lines and unique color schemes are not unattractive, making it an enduring design. Both front and rear lights, as well as turn signals, use conventional bulbs, but the brightness is sufficient. The taillight also features a popular split design. Configuration: The dashboard uses a traditional mechanical style and includes a gear indicator. The front brake is a single-piston disc brake, while the rear brake is a traditional drum brake. The internal wiring and craftsmanship are also meticulous, maintaining Yamaha's consistent production standards.
6
4
Share

What is the fuel consumption of Yamaha Xunying?

Xunying's actual fuel consumption per 100 kilometers is not less than 3 liters. If the average comprehensive fuel consumption is 3.65 liters per 100 kilometers, it is considered basically normal or slightly higher. Here is some introduction about Xunying: Appearance: The front lighting layout is divided into two parts, with the upper part being the turn signals and the lower part being the high/low beam lights and position lights. The clear and easy-to-read analog instrument panel is nothing special among scooters produced and sold in recent years. Braking: The single-piston brake caliper provides excellent actual braking force. The front storage compartment is reasonably designed, allowing for easy placement of small items. The scooter comes with an anti-theft keyhole, which is a common configuration for current scooters.
6
1
Share

How to Align the Reference Points for Parallel Parking in Driving Test Part 3?

Here are the step-by-step methods for aligning reference points during parallel parking in Driving Test Part 3: 1. Observe the front one-third of the car hood: Divide the hood into three equal sections. When the right one-third point aligns with the curb line during parking, the right wheels will be precisely 30cm from the curb. 2. Use the hood reinforcement rib as reference: Keep the right reinforcement rib aligned with the curb while moving forward to maintain the 30cm distance. 3. Utilize the windshield wiper notch: When the wiper's notch coincides with the curb line during forward motion, the vehicle maintains exactly 30cm from the curb. Detailed techniques for gear shifting in Driving Test Part 3: 1. Listen: When gear and speed mismatch occurs, obvious vehicle vibration and engine "knocking" sounds indicate shifting is required. 2. Watch: For students with poor vehicle sensitivity who can't perceive vibration intensity or determine shifting timing by sound, observe dashboard gauges for assistance. 3. Three Don'ts: Never look down at the gearshift, avoid skip-shifting, and prevent steering deviation.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.