Where is the spare tire for the Mercedes-Benz C260L?

2 Answers
VonAbel
07/24/25 9:51pm
The Mercedes-Benz C260L generally does not come with a spare tire. Here are the relevant details: 1. Run-flat tires: This model is equipped with run-flat tires, technically known as "Self-Supporting Run-flat Tires" (RSC). The inflated tire sidewall is the main part that supports the vehicle's weight, especially for tires with a larger aspect ratio (the ratio of tire height to width), where the sidewall is very "thick." Even if punctured by a nail, run-flat tires won't immediately lose air and can maintain a certain speed for a relatively long distance. In the event of a tire deflation, the vehicle can still drive at 80 km/h for up to 80 kilometers, allowing enough time to reach a repair shop. 2. Tire maintenance precautions: Regular maintenance is necessary to extend the tire's lifespan. Maintain a safe distance when driving at high speeds to avoid unnecessary or frequent braking, which can damage the tires. For safety reasons, pay attention to the tread depth. Worn-out tires with reduced friction against the road surface have longer braking distances and should not be used for high-speed driving. There is a direct correlation between tire load and pressure. Overloading is similar to low tire pressure and can cause tire damage. Frequent overloading can reduce tire lifespan by 20%-50%. Incorrect loading methods can also lead to uneven tire load distribution, causing excessive wear on certain tires and reducing their lifespan. Tire pressure is critical—it must comply with national standards for different types and specifications of tires. Regularly check tire pressure, as both overinflation and underinflation can cause irregular wear, tread base cracking, cord breakage, ply separation, and even tire blowouts.
Was this review help?
10
0
Share
Nina
08/10/25 2:48pm
I remember when I drove the Mercedes-Benz C260L, the spare tire was usually hidden under the floor of the trunk. Lift the trunk mat, and you'll see a square cover—pull it open to access the spare tire or tire repair kit. To be honest, though, many configurations of this car come with run-flat tires, allowing you to drive slowly to a repair shop if you get a flat. Even if there's a spare tire, you should check its pressure regularly to avoid finding it flat when you really need it. I think Mercedes' design is quite smart—it saves space and is safe, but if you have a problem on the road, it's best to pull over first and carefully confirm your location before proceeding. Spare tires are usually temporary, so after installation, don’t exceed 80 km/h to ensure safety. During regular maintenance, don’t forget to ask the technician to check the condition of the spare tire.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What brand of engine oil does BMW use?

The dedicated engine oil for BMW vehicles is Castrol's Edge series with a viscosity rating of 5W30. For later maintenance, you may consider switching to Shell, Mobil, or other brands. BMW typically uses engine oil models such as 5W30, and BMW 4S stores also provide 5W40, 0W40, and 0W30 models. The original BMW engine oil is LongLife-01, a product developed in collaboration with Shell, featuring Shell's unique PurePlus technology. The BMW 5 Series generally uses 5W30 engine oil; for models like the BMW 1 Series, 2 Series, 3 Series, and X1, the official recommendation is SAE-5W-30 and higher-grade SAE-0W-40. As long as the oil meets BMW's Longlife certification (common certifications include BMW-Longlife-98, BMW-Longlife-01, and BMW-Longlife-04), it can be used. Generally, meeting BMW-Longlife-01 is sufficient. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts. The latter number represents the oil's kinematic viscosity at 100°C, with higher values indicating better viscosity retention at high temperatures, which can be interpreted as superior lubrication performance under high-temperature conditions. The method for changing engine oil in BMW vehicles is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench and collect the old oil in a container until no more oil flows out. Start the engine for about 30 seconds to allow oil in the main oil passages to drain; Remove the oil filter with a specialized wrench; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Run the engine for 5 minutes and check for leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.
1
1
Share

Can You Lock the Car During BMW iDrive System Upgrade?

You can lock the car during a BMW iDrive system upgrade. Here are detailed points about BMW: 1. Vehicle Models: BMW is a German automotive brand under the BMW Group. As one of Germany's three major luxury car brands, BMW holds significant market share and brand recognition in China's new car market, while also offering certified pre-owned vehicle services in the used car sector. 2. Definition: The vehicle multifunction upgrade control system utilizes host computer technology to enhance car functionalities while preserving all original features, thereby upgrading the vehicle's configuration.
13
4
Share

What does the BMW AOFF button mean?

The "AOFF" button in the car is the auto start-stop switch, used to control the engine's auto start-stop function. Here is an introduction to the use of the AOFF button: 1. Auto start function: After getting in the car, the auto start-stop function is enabled by default, and the AOFF button is in an off state. 2. Simply press the brake pedal: While driving, simply press the brake pedal, and the engine will automatically shut off after the vehicle comes to a complete stop for about two seconds. Keeping the brake pedal pressed will maintain the engine in a closed state. 3. Release the brake or turn the steering wheel: As soon as the brake is released or the steering wheel is turned, the engine will automatically restart immediately, and the car can be driven by pressing the accelerator pedal directly.
14
5
Share

What is the Snake Badge Mustang?

The Snake Badge Mustang belongs to the Ford brand and is named the Ford Mustang GT500. Here is some information about Ford: 1. Company Introduction: Ford Motor Company is one of the largest automobile manufacturers in the world. Established in the early 20th century, Ford Motor Company, driven by founder Henry Ford's vision of 'building cars affordable for everyone' and his exceptional foresight, has weathered a century of challenges to become one of the world's top four automotive groups. The company also owns Ford Credit (Ford-Credit Financial), the world's largest automotive finance subsidiary, and the customer service brand Quality-Care. 2. Logo Origin: The Ford logo features the word 'Ford' in white against a blue background. Since founder Henry Ford loved small animals, the designer incorporated the image of a white rabbit into the Ford lettering.
10
3
Share

Are Car Door Shock Absorber Pads Useful?

Car door shock absorber pads primarily function to prevent contact between the suspension components and the vehicle body. When the car corners and weight shifts to one side, causing body roll and compressing the springs, these pads provide support to help reduce vehicle tilt. Below are additional details: 1. Composition and Function: The pads are made of materials like paper, rubber, or copper sheets, placed between two surfaces to enhance sealing. They serve as sealing elements between static sealing surfaces to prevent fluid leakage. 2. Principle: The pads are made of softer materials and are sandwiched between surfaces that require sealing, making it easier to achieve the necessary sealing effect.
12
2
Share

What type of engine oil is suitable for the Tharu?

Tharu uses 95-grade engine oil. Below are relevant introductions about engine oil: 1. Functions of engine oil: Lubrication: Reduces wear on engine metal components; Cleaning: Removes impurities and maintains cleanliness inside the engine, including moisture, combustion byproducts, oxidation products, dust, etc.; Cooling: Carries away excess heat to maintain normal engine temperature; Sealing: Forms an oil film to prevent gas leakage; Anti-corrosion: Prevents rust and neutralizes acidic substances. 2. Composition of engine oil: (1) Base oil: Mineral oil, synthetic oil. (2) Additives: Viscosity index improvers, detergents and dispersants, anti-wear agents, antioxidants, pour point depressants, friction modifiers, rust inhibitors, anti-foaming agents, and other additives.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.