Where is the spare key usually placed in the car?

What is sprayed on tires during car washing?

During car washing, what is sprayed on the tires is tire protectant. The function of tire protectant is to maintain the elasticity of the tire's structural molecules, making them more durable. The maintenance methods for tires include: 1. Regularly removing debris from the tire treads; 2. Periodically checking tire pressure; 3. Inspecting the wear condition of the tires and replacing them in a timely manner. The functions of tires are: 1. To prevent severe vibration and early damage to vehicle components, adapt to the high-speed performance of the vehicle, and reduce noise during driving; 2. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface; 3. To improve the vehicle's power, braking, and off-road capabilities; 4. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions.

10

3

Share

Transmission Abnormal Noise Issues?

When abnormal noises occur in the transmission, there are mainly the following reasons: 1. Bearing wear and damage: When bearings wear, their clearance increases and the fitting accuracy decreases; when bearings are damaged, abnormal noises may occur due to the inability to operate normally, and may even cause damage to transmission components, leading to further faults. 2. Loose bolts on the transmission housing, or excessive clearance between the gearshift lever and the shift fork groove in manual transmissions: Vibrations during use can loosen bolts, so regular inspections are necessary. 3. Long-term lack of automatic transmission fluid replacement: The fluid may thicken and lose its fluidity, resulting in insufficient lubrication between components, leading to direct friction and increased mechanical wear, which causes abnormal noises. 4. Use of inferior automatic transmission fluid: Inferior transmission fluid has poor heat resistance and is prone to oxidation, forming sludge and deposits that can clog filters and oil passages, increasing internal friction and causing abnormal noises in the vehicle.

10

1

Share

How to Clean Fabric Seats Thoroughly?

When fabric seats need thorough cleaning, here are the main methods: 1. Simple beating method to remove dust: Vigorously beat the seats like sunning a quilt to dislodge dust from the interior. 2. Combination of long-bristle brush and powerful vacuum cleaner: For mildly dirty seats, use a long-bristle brush alongside a vacuum cleaner, brushing while simultaneously suctioning. 3. Soapy water cleaning: For heavily soiled seats, first remove dust with a brush and vacuum, then wipe the surface with a soft dry towel. Apply low-corrosivity soapy water with warm water, wipe clean, and finally dry with a hair dryer. 4. Specialized foam cleaner for fabric seats: For colored beverage stains, spray foam cleaner on the affected area, wait a few seconds, then wipe clean.

6

2

Share

What is the difference between disc brakes and hydraulic brakes?

Here are the solutions for when the ABS anti-lock braking system warning light is on: 1. If the light does not turn on after the ignition is switched on, or does not turn off after lighting up, or lights up while driving, it indicates a system malfunction. 2. If only the ABS warning light is on, it means there is a fault in the ABS system. The car can still rely on the conventional braking system for braking, but professional inspection and repair should be sought as soon as possible. 3. If both the ABS warning light and the braking system warning light come on while driving, it indicates faults in both the ABS and the braking system, and the braking characteristics will change. In this case, you must stop driving immediately and check the brake fluid level.

19

1

Share

How Long After Production is a Car Considered a Stock Vehicle?

Stock vehicles refer to cars that remain unsold for more than three months after being manufactured. Given the automotive industry's emphasis on timeliness, it typically takes one to two months for a new car to be produced and sold to a buyer under normal circumstances. Vehicles that exceed three months or longer are generally classified as stock cars. More information about stock vehicles is as follows: The term "stock vehicle" lacks a precise legal definition, but it is indeed recognized within the automotive sales industry. It generally describes cars that have not been sold within three months of production. As a commodity, automobiles are bulky, expensive, and incur high storage costs, tying up significant dealer capital. Consequently, dealers usually avoid keeping inventory vehicles for extended periods. However, due to various factors, the market does contain numerous cars that have been in stock for over three months.

1

2

Share

How much engine oil does the Toyota Crown 2.0t require?

Toyota Crown 2.0t requires approximately 4.3 liters of engine oil. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Taking the 2018 Toyota Crown as an example, its body dimensions are: length 5020mm, width 1805mm, height 1480mm, with a wheelbase of 2925mm, minimum ground clearance of 140mm, and a fuel tank capacity of 70 liters. The 2018 Toyota Crown is equipped with a 2.0t turbocharged engine, delivering a maximum power of 173kW and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.

8

5

Share

Where is the spare key usually placed in the car?

What is sprayed on tires during car washing?

Transmission Abnormal Noise Issues?

How to Clean Fabric Seats Thoroughly?

What is the difference between disc brakes and hydraulic brakes?

How Long After Production is a Car Considered a Stock Vehicle?

How much engine oil does the Toyota Crown 2.0t require?

How much engine oil should be added to a Jetta car?

Why Should Fog Lights Be Used in Rainy and Foggy Weather?

What Type of Engine Oil is Suitable for a Golf Car?

Reasons for a Heavy Car Accelerator Pedal?