Where is the Sinotruk fuse box located?

What is the correct method for car polishing?

The correct method for car polishing is as follows: 1. Wash the entire vehicle: Use a paint cleaner with strong degreasing power to clean the entire vehicle. When using the cleaner, avoid particles and dust that may cause new scratches during the polishing process. 2. Sand with water sandpaper: For defects such as coarse particles, fine sandpaper marks, or flow marks on the paint surface, use 600#~1000# water sandpaper wrapped around a small rubber block and lightly sand the area until it is smooth (be careful not to sand through the paint layer). 3. Coarse and fine grinding: Use a mechanical grinder (electric or pneumatic) with coarse grinding paste to perform coarse grinding on the sandpaper marks; then add polishing paste for fine grinding. 4. Polishing: Use a mechanical polisher with a mirror-finish treatment agent to remove swirl marks left by the coarse grinding paste, achieving a mirror-like polish on the paint film. 5. Manual waxing: After grinding and polishing, wipe off the grinding and polishing paste, immediately use a cotton cloth dipped in polishing wax to wipe the polished areas, then use a dry cotton cloth to remove excess wax, leaving the paint surface bright and dazzling like a mirror.

17

0

Share

What is the tire size of the Audi A4?

The base model Audi A4 uses tires sized 225/55R16, while the higher-end model uses 225/50R17. Tire size markings typically appear in formats like: 215/70R15, where the numbers represent: 1. 215 indicates the tire section width in millimeters, generally ranging from 145-285mm in 10mm increments. 2. 70 is the aspect ratio - the percentage ratio of tire sidewall height to section width. 70 represents 70%, with normal aspect ratios between 30%-80%. Regular sedans shouldn't use tires with aspect ratios >75%, while luxury cars and high-performance sports cars recommend ratios <60%. 3. R stands for Radial, indicating radial tire construction. 4. 15 represents the rim diameter in inches.

14

3

Share

Is the Baojun 510 Suitable for Long-Distance Driving?

Baojun 510 is a compact SUV produced by SAIC-GM-Wuling Automobile and is suitable for long-distance driving. Relevant information is as follows: 1. The Baojun 510 is equipped with a 1.5-liter naturally aspirated engine, delivering a maximum horsepower of 112 hp, a maximum power of 82 kW, and a maximum torque of 146.5 N·m. 2. The combined fuel consumption of the Baojun 510 is 6.3L/100km, and it offers a choice of a 6-speed manual transmission, 5-speed AMT, or CVT (simulating 8 speeds). Things to note when driving long distances are as follows: 1. Before embarking on a long-distance journey, always check the tires. If there is any air leakage or insufficient pressure, repair it promptly to prevent safety hazards during high-speed driving. 2. When driving long distances, avoid fatigue driving. Stop and rest approximately every 3 hours. 3. When driving on highways, stay in one lane, avoid changing lanes arbitrarily, and do not drive over the lane markings.

15

3

Share

What are the body dimensions of the Ford S-MAX?

The length, width, and height dimensions of the Ford S-MAX are 4760mm/1910mm/1640mm, which are official data. The length of the Ford S-MAX refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetrical plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetrical plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The naturally aspirated engine of the Ford S-MAX has a maximum power of 117.6 kW and a maximum torque of 205 Nm. This engine reaches its maximum power at 6800 rpm and its maximum torque at 4000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an automatic transmission (AT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

17

1

Share

How to Start a Car Without a Key?

A car cannot be started without a key. The push-button or rotary knob for one-key start can only activate the ignition when it detects the presence of the smart key, usually within a range of about 50 centimeters. Below are the correct steps to start the car: (1) Insert the key and turn it to the ACC position, then wait for 2-3 seconds to allow the main power relay contacts to stabilize and power the initial components that require electricity. (2) Turn the key to the ON position and wait for 6-10 seconds to let the fuel pump relay engage. After all sensors have adjusted their states, turn the key to the START position until the engine runs continuously, then return it to ON. Under the guidance of the onboard computer, the system will automatically adjust to the optimal position and parameters before finally starting the engine.

5

1

Share

Where are Dunlop tires manufactured?

Dunlop is a Japanese tire brand, affiliated with the Sumitomo conglomerate, originally the British Dunlop Company. Here is relevant information about the brand: 1. Founded in Japan, it was later annexed by Japan's staunch right-wing Sumitomo conglomerate during World War II when Japan declared war on Britain. 2. Dunlop, which pioneered the development of pneumatic tires 120 years ago, has continuously developed new technologies alongside the evolution of automobile society, contributing to the progress and harmony of cars, people, and society. 3. Furthermore, by participating in historic rallies in the motorsport arena, DUNLOP has demonstrated its technical prowess in speed and endurance through actual performance, dedicating itself to developing even higher technologies with a spirit of excellence. 4. The most notable characteristic of Dunlop tires is their lack of distinctive features (similar to Bridgestone); they are not as quiet and comfortable as Michelin and Continental, nor do they offer the grip of Pirelli, making them a relatively neutral tire.

14

4

Share

Where is the Sinotruk fuse box located?

What is the correct method for car polishing?

What is the tire size of the Audi A4?

Is the Baojun 510 Suitable for Long-Distance Driving?

What are the body dimensions of the Ford S-MAX?

How to Start a Car Without a Key?

Where are Dunlop tires manufactured?

How Many Liters Can a Sedan's Fuel Tank Hold?

How to reset the maintenance light of Venucia D60?

Will temporary speed limits in rainy weather on highways be photographed?

How to Bleed Air from the Radiator?