Where is the shutdown button of Xpeng Motors?

3 Answers
VonJocelyn
07/28/25 12:52pm
Xpeng's cars are pure electric vehicles, and Xpeng Motors does not have a shutdown button. Taking the Xpeng P7 as an example, the following is a specific introduction to the Xpeng P7: 1. Model positioning: The P7 is a pure electric mid-size car. The wheelbase of this car is 2998mm (millimeters), and the length, width, and height are 4880mm (millimeters), 1896mm (millimeters), and 1450mm (millimeters) respectively. 2. Power: The P7 has rear-wheel-drive models and four-wheel-drive models. The rear-wheel-drive model is a single-motor model, and the four-wheel-drive model is a dual-motor model. The maximum power of the single-motor model of the P7 is 196kw, and the maximum torque is 390 Nm. The total power of the dual-motor model is 316kw, and the total torque is 655 Nm. 3. Suspension type: The front suspension of the P7 uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
10
0
Share
DiElaina
08/11/25 5:35pm
I remember when I drove a Xpeng car, the engine shut-off button was particularly easy to find. It is located on the driver's side of the center console, usually next to the gear shift or below the right side of the steering wheel. It's a small round button, possibly with a power icon or backlight display. A gentle press turns off the engine. Since Xpeng is an electric vehicle, the power automatically shuts off after turning off the engine, and the car locks respond accordingly—the operation is quite responsive. It's recommended to familiarize yourself with the dashboard layout before driving to avoid accidental touches while on the road. The button is designed to be compact for safety. It took me some time to get used to it initially, but later I found it much more convenient compared to traditional cars that require inserting a key. Another feature of this button is that you need to press the brake pedal to start or shut off the engine, preventing accidental operations—this is part of the user-friendly design. During regular maintenance, check if the button is loose and keep it dry to avoid accidental touches.
Was this review help?
5
4
Share
Expand All
Wood
09/28/25 7:43am
As someone who frequently researches cars, I find the design of the Xpeng Motors' engine shut-off button to be very user-friendly. It is typically located in the central control area of the main cockpit, near the bottom of the gear shift knob. The button has a smooth and textured surface, often featuring a silver edge or LED light. It doesn't just turn off the engine; it's also connected to the smart system. For example, after shutting off, the vehicle automatically enters standby mode and can only be restarted within the key's sensing range. One advantage of electric vehicles is that the system powers down quickly after shutting off, making it quieter and more fuel-efficient than gasoline cars. During test drives, I noticed the button responds quickly without any delay issues, though sometimes too many items in the car can block its location. I recommend keeping the area clean and avoiding clutter, especially ensuring nothing obstructs the button before driving. It integrates safety features, such as emitting a warning sound if the doors aren't properly closed when shutting off, preventing potential hazards. Overall, the button's position is intuitive, and once accustomed to it, it becomes very convenient to use.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Is it acceptable if the left and right sides are not equally wide when reversing into the garage?

It is considered acceptable. Below is the relevant information about Subject 2: 1. Examination standards: In the Subject 2 test, the criterion for reversing into the garage is not based on the width of both sides but rather on whether the vehicle body crosses the line. Therefore, there is no need to worry about the distance on both sides of the vehicle body. As long as the vehicle body does not cross the line, it is considered normal. 2. Reversing into the garage in Subject 2: This is the first item in the Subject 2 test. If a mistake is made in this item, the Subject 2 test will be deemed a failure. When the vehicle enters the garage, as long as the vehicle body does not cross the boundary line, the distance on both sides of the vehicle is not important. Frequent adjustments to the vehicle body may cause it to cross the line, resulting in test failure. 3. Subject 2 test items: There are five items. The first test item is reversing into the garage, the second is parallel parking, the third is stopping and starting on a slope, the fourth is turning at a right angle, and the fifth is driving through curves. When the vehicle can successfully complete the curve driving, it proves that the test has been passed, and you can check your score on your own.
11
2
Share

What causes the left side to be too wide when reversing into the left bay?

The following are the related reasons for the left side being too wide when reversing into the left bay: 1. Steering too late at the starting point: If the left side is too wide and the right side is too narrow when reversing into the left bay, it is because the steering was done too late at the starting point. Even if you don't adjust the direction and reverse in one go, the right side will still be too narrow! 2. Different turning radii for left and right turns: Due to the different turning radii of the car for left and right turns, the steering point for reversing into the left bay at the starting point usually needs to be slightly earlier than for the right bay. This applies to all test vehicle models! It is essential to improve proficiency in speed control and steering wheel operation and strengthen basic skill practice! 3. Timing is crucial: The situation where the left side is too wide and the right side is too narrow when reversing into the bay often occurs during right bay reversing. Beginners are unfamiliar with the vehicle's performance, have inaccurate judgment of the 30 cm distance, and are not very good at timing the steering at key points. A combination of these factors leads to the issue.
19
0
Share

What are the differences between new cars and used cars?

Differences between new cars and used cars: 1. Performance differences: In terms of performance, the engine and overall performance of a new car are far superior to those of a used car. 2. Differences in appearance and interior: Whether it's the exterior or interior, a new car looks much more comfortable because a used car has already been used by someone else, and the interior may be dirty and worn, while the exterior may also be slightly worse. 3. Differences in fault conditions: New cars rarely have issues, while used cars are more likely to have minor or even major problems. After all, machinery will experience wear and tear over time, and the performance of a new machine is naturally better than that of an old one.
10
4
Share

Which part of the car should the safety hammer strike?

The safety hammer should strike the four corners of the car window glass. Here are specific details about the safety hammer: 1. Usage method: Car glass is a high-strength tempered glass with strong impact resistance. In case of an emergency, use the pointed end of the safety hammer to forcefully strike the four corners of the glass. Once cracks appear, strike a few more times or kick outward with your foot, and the entire glass will fall off. After the glass completely falls off, quickly and orderly jump out of the vehicle and evacuate to a safe area. 2. Common misconceptions: Believing that the center of the window glass is the easiest point to break, focusing all efforts on striking the middle part, or using personal items such as keys, high heels, mobile phones, or wooden sticks as substitutes for the safety hammer.
10
3
Share

What are FAW Toyota's first maintenance regulations?

FAW Toyota's first maintenance regulations are as follows: 1. Time regulation: The first maintenance time is calculated based on the vehicle pickup date, with the purchase invoice serving as the reference. It's advisable to make an appointment with the 4S store before going for the first maintenance. 2. Maintenance cycle: When the vehicle reaches 5,000 kilometers or 3 months, a comprehensive free inspection is required at the 4S store, but no parts will be replaced. The first actual maintenance is due at 10,000 kilometers or 6 months, during which the 4S store waives the first maintenance fee. Subsequent maintenance intervals are recommended by the manufacturer to be every 10,000 kilometers or 6 months.
8
2
Share

Where to Renew an Expired Beijing Driver's License?

To renew an expired Beijing driver's license, you can go to any vehicle management office in Beijing's districts. Below is the relevant information for renewing a Beijing driver's license: 1. Required documents: Original and photocopy of the motor vehicle driver's identity proof; Original receipt for digital photo collection of Beijing motor vehicle driver's license; Original medical institution physical condition proof from Beijing driver's 'one-stop' service; Original motor vehicle driver's license or a written statement of loss of the driver's license. 2. Notes: After the application is successful, do not drive a motor vehicle with the expired original license before receiving the new one; During the process, the applicant and the recipient must be the same person. Please fill in the relevant information truthfully and be responsible for the authenticity and validity of the provided documents; Once the online application at the vehicle management office is approved, it is considered processed, and the fee will be charged immediately with no refunds accepted.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.