Where is the seat heating switch located on the Land Cruiser?

1 Answers
AnaRose
07/29/25 12:56pm
The seat heating switch on the Land Cruiser is located in front of the gear lever. The buttons control the heating for the left and right seats respectively: pressing the left button activates the driver's seat heating, while pressing the right button activates the passenger seat heating. Taking the 2016 Land Cruiser as an example, its body dimensions are: length 5170mm, width 1975mm, height 1930mm, wheelbase 2850mm, fuel tank capacity 138 liters, and curb weight 2655kg. The 2016 Land Cruiser features a front suspension with a spiral spring double-wishbone independent suspension and a rear suspension with a four-link non-independent suspension. It is equipped with a 4.0L naturally aspirated engine, producing a maximum horsepower of 275PS, maximum power of 202kW, and maximum torque of 385Nm, paired with a 5-speed automatic transmission.
Was this review help?
13
2
Share
More Forum Discussions

Is the Audi CVT transmission with simulated 8-speed durable?

Audi CVT transmission with simulated 8-speed is durable. Multi-plate brake: The CVT achieves continuously variable speed ratios through the radius changes of two cone pulleys and a steel belt, with its core component being the transmission steel belt. The lifespan of the CVT largely depends on the service time of this steel belt. Apart from its own quality design, the belt's lifespan is also significantly influenced by individual driving habits. Torque converter: As the power input end, the flexibly connected torque converter combined with the inherently somewhat 'soft' CVT can easily result in poorer acceleration performance. To address this, Audi has replaced the power input end with a multi-plate wet clutch. Essentially, once the car starts moving, the transmission and engine are rigidly connected, which is bound to mitigate the phenomenon of sluggish acceleration.
11
0
Share

What is the difference between a straight push master cylinder and a side push master cylinder?

Straight push master cylinder and side push master cylinder differ as follows: Safety aspect: The straight push master cylinder is used to store brake fluid. When braking, operating the brake lever generates hydraulic pressure, which drives the slave cylinder to press the brake friction pads, clamping the brake disc on the front wheel to achieve braking. The transparent window next to the master cylinder is used to observe the brake fluid. The fluid level should reach half of the window, or as long as the fluid is visible, it is sufficient. Feel difference: There is a significant difference in feel. With the straight push, when the lever is pressed downward, the piston moves in the same direction, and the ratio between input and output is constant. The braking force increases proportionally with the amount of hand pressure applied. In contrast, with the side push, when the lever is pressed downward, the piston moves at an angle close to 90 degrees, resulting in a non-fixed ratio between input and output, which causes issues with the feel.
18
3
Share

Can Total Loss Vehicles Be Normally Traded?

Total loss vehicles can be normally traded. Trading of total loss vehicles: It is not illegal. Total loss vehicles can be traded as long as they meet the national regulations for roadworthiness of motor vehicles. China prohibits the trading of scrapped vehicles. As long as a total loss vehicle has not reached the scrapping standard, it can be normally bought and sold. Actual total loss: This refers to a situation where the insured object is damaged but not completely destroyed—it can be repaired or recovered. However, the cost involved would exceed the value of the salvaged insured object, making it not worth the effort. In such cases, the insurance company abandons further attempts and compensates the insured with the full insured amount, which is considered a constructive total loss. The insurance company will repair the vehicle and then sign an agreement with an auction company to auction it. Many vehicles can enter the auction process within 15 days. Auctions can be conducted on-site or online, but the entire process is lawful and legitimate. Additionally, the insurance company will assist with the transfer of ownership.
9
4
Share

What is E43 type electrode?

E43 type electrode is a carbon steel electrode. Meaning of E43 type electrode: It belongs to the type of electrode with a deposited metal tensile strength ≥421MPa (4300kgf/cm^2). Electrode model: The electrode model numbering method is as follows: the letter "E" represents the electrode; the first two digits indicate the minimum tensile strength of the deposited metal; the third digit indicates the welding position of the electrode, "0" and "1" indicate that the electrode is suitable for all-position welding (flat, vertical, overhead, horizontal), "2" indicates that the electrode is suitable for flat welding and flat fillet welding, "4" indicates that the electrode is suitable for vertical down welding; the combination of the third and fourth digits indicates the type of welding current and the type of coating. The addition of "R" after the fourth digit indicates a moisture-resistant electrode, "M" indicates an electrode with special provisions for moisture resistance and mechanical properties, and "-1" indicates an electrode with special provisions for impact properties.
20
3
Share

What is the fuel consumption of the 2021 Jetour X90 Plus?

The fuel consumption of the 2021 Jetour X90 Plus is 1.1 to 1.6L. Front section: Similar in style to the X95, it primarily showcases its positioning as a mid-to-large SUV. The front features a large polygonal grille with thick bilateral horizontal bars, giving it a rugged overall impression. However, the headlight design leans towards a fashionable and tech-savvy look, adopting a matrix layout that enhances refinement. The fog lights on both sides also feature vertical matrix LEDs, echoing the headlights. Exterior design section: Although it is a PLUS version, a closer look reveals similarities to the Jetour X95. Reportedly, it uses the "Hui City Elite 2.0" design language. For example, the waistline on the side of the body and the wheel design reflect the stylish characteristics of an urban SUV. However, the roof design does not adopt a floating roof style, meaning there are no blackened A/D pillars. Some details differentiate it, such as the addition of chrome horizontal strips, which enhance the visual layering on the side of the body.
18
1
Share

What is the function of a motorcycle steering damper?

The function of a motorcycle steering damper is to reduce the frequency and amplitude of such wobbling, bringing it into an acceptable range. Tracking: When a motorcycle is traveling at high speed, accelerating at full throttle, crossing ditches, or running over stones on the road, the front wheel may lift or have a tendency to lift. At the moment of landing, the direction of the front wheel may deviate from the direction of the motorcycle body. At this time, the front wheel will automatically oscillate to find the direction of the motorcycle body. This process is called "tracking". Steering damper is a double-edged sword: The steering damper is also a double-edged sword, just like a shock absorber. Pursuing handling means sacrificing comfort, while pursuing comfort means sacrificing handling. The better the damping effect of the steering damper, the lower the flexibility of the motorcycle. Conversely, the higher the flexibility of the motorcycle, the higher the risk of wobbling at high speeds. Fortunately, the steering damper is adjustable, providing riders with more choices.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.