Where is the seat heating off button for the Magotan?

What is the middle button on an electric vehicle key?

The middle button on different electric vehicle keys serves different functions, which can be determined based on the icons displayed on the key. The lock symbol on an electric vehicle key represents the lock button: The lock button is used for remote locking; when the vehicle is stationary, turn off the power and press this button to activate the anti-theft alarm function. The unlock symbol on an electric vehicle key represents the unlock button: The unlock button is used for remote unlocking; when the anti-theft alarm is activated, you need to press the unlock button to deactivate it. The "bell" symbol on an electric vehicle key: This symbol is used for one-touch vehicle locating; in large parking lots, you may sometimes struggle to find your vehicle. Pressing the bell button will cause the vehicle to emit five audible beeps, helping you locate it. The "lightning" symbol on an electric vehicle key: This button enables keyless start; in case the key is accidentally lost, pressing the lightning button twice will remotely start the vehicle, allowing normal operation. Note: when leaving the vehicle, press the unlock button once, then the lock button to prevent the vehicle from remaining in the started state. It is advised to use this feature only in emergencies.

11

1

Share

Is It Serious If Car Tire Pressure Drops in Cold Weather?

It is serious if car tire pressure drops in cold weather and needs to be adjusted. Reasons why low tire pressure in cold weather is problematic: Due to low temperatures in winter, the tire pressure decreases as a result of thermal contraction. If the tire pressure is not appropriately increased, it will not only increase the car's fuel consumption but also accelerate tire wear. However, the tire pressure should not be too high either, as it would significantly reduce the friction between the tires and the ground, weakening braking performance. In winter, the tire pressure should be adjusted not only according to the manufacturer's standards but also based on the driving road conditions. Methods for adjusting tire pressure: Generally, car tire pressure should be checked at least once a month, and adjustments should be made with each season change. The ideal times for adjustment are November and May. In November, as winter sets in, tire pressure usually decreases and should be slightly increased. In May, as the weather starts to get hotter, it's advisable to check if the tire pressure is normal. Special attention should be paid to the fact that as long as the tire pressure is not significantly above the standard range, there is no need to deliberately reduce it. If the tires are not underinflated, there is no need to adjust them every month.

20

3

Share

What is done during the third maintenance at 15,000 kilometers?

15000 kilometers third maintenance involves changing the engine oil and oil filter, checking whether the air filter needs replacement, inspecting tire pressure, windshield washer fluid level, coolant level, brake fluid level, etc. Engine oil change: The engine oil change is primarily for the maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. Oil filter replacement: The function of the oil filter is to remove various impurities from the engine oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the engine oil during an oil change.

3

4

Share

Why Are Oil Pans Made of Plastic?

With the development trend of automotive lightweighting, an increasing number of automotive components are replacing steel with plastic to reduce vehicle weight, and oil pans are one such example. Advantages of using plastic materials for oil pans: Outstanding lightweighting benefits—under similar conditions of strength and stiffness, plastic injection-molded parts are 50% lighter than single-layer steel sheet stampings. High design flexibility—the excellent formability of plastic materials significantly enhances possibilities such as variable wall thickness, localized reinforcement ribs, undercut structures, multiple flanges, and integration with other components into a single unit. Significant cost advantages in manufacturing—well-functioning plastic oil pan components not only improve production efficiency but also reduce production costs. Lower defect rates—injection molding processes yield higher-quality products compared to cold stamping of thin steel sheets, thereby improving overall system quality and reducing material waste. Superior vibration damping and noise reduction—engines equipped with plastic oil pans operate with overall noise levels below 95dB (decibels). Exceptional operational reliability, durability, and adaptability to low-temperature conditions. With technological advancements, particularly in plastic materials, plastics now offer higher corrosion resistance, strength, lower density, superior thermal and acoustic insulation, excellent formability, and cost-effectiveness compared to metals, along with lightweighting advantages. As a result, the application of plastic technology in oil pans has become a future trend.

13

5

Share

What Causes Tire Pressure to Drop Without a Puncture?

Tire pressure decreases without a puncture primarily due to prolonged exposure to low temperatures, leading to insufficient tire pressure. Direct Tire Pressure Monitoring System (TPMS): This system uses pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts the driver when tire pressure is too low or when there is a leak. Indirect Tire Pressure Monitoring System (TPMS): This system works by detecting when a tire's pressure drops, causing the vehicle's weight to reduce that tire's rolling radius, which in turn makes it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of tires to monitor pressure.

5

4

Share

What is the reason for the diesel heater smoking and failing to start?

The reasons for the diesel heater smoking and failing to start are as follows: Poor ventilation: It may be due to poor ventilation affecting the startup. You can improve the ventilation system and appropriately increase the vent size. Poor fuel quality: It may be due to carbon buildup in the truck's diesel heater combustion chamber. Open the diesel heater and clean the carbon deposits. It could also be caused by poor fuel quality affecting ignition. You can have it specifically tested at an after-sales repair shop. Working principle of diesel heaters: The general principle of a diesel heater is that it is a small internal combustion engine that directly burns diesel to obtain heat, and then uses the machine's heat dissipation to warm the driving compartment.

5

1

Share

Where is the seat heating off button for the Magotan?

What is the middle button on an electric vehicle key?

Is It Serious If Car Tire Pressure Drops in Cold Weather?

What is done during the third maintenance at 15,000 kilometers?

Why Are Oil Pans Made of Plastic?

What Causes Tire Pressure to Drop Without a Puncture?

What is the reason for the diesel heater smoking and failing to start?

Can Automatic Headlights Stay On All the Time?

What does the 'T' in cars mean?

What's the Difference Between 2.0t and 3.0t?

What are the new regulations for downgrading B1 and B2 driver's licenses with 12 penalty points?