Where is the Santana's air conditioning filter located?

2 Answers
VonStephanie
07/24/25 8:48am
The Santana's air conditioning filter is located below the glove box, near the center console. To replace the air conditioning filter, you first need to remove the storage compartment. There are three clips on the air conditioning filter; gently pry them outward to open. Then, use both hands to press the clips on the filter cover and remove the cover plate. Take out the old filter and replace it with a new one. The Santana's exterior design doesn't have many highlights, featuring a relatively simple overall design without exaggerated lines. The waistline running from the front to the rear gives the car body a dynamic tension. The chrome trim below the windows is simple yet aligns with Chinese consumers' aesthetic preferences, adding a touch of sophistication.
Was this review help?
3
2
Share
ChristianRose
08/11/25 4:21am
I've been driving my Santana for over three years. The cabin air filter is located behind the glove compartment in front of the passenger seat. That area is usually used for storing miscellaneous items. To remove it, first empty the compartment and gently press the clips to release it. Behind the compartment, there's a small cover; unscrew it to access the filter. Changing it yourself is quite simple. Generally, it should be replaced every six months or 10,000 kilometers. Otherwise, accumulated dust can cause the air from the AC to smell bad, affecting your driving mood. Last time I forgot to change it, and my throat felt itchy while driving—probably due to increased bacteria. Buying the filter online costs just over ten yuan, saving money and promoting health. Just remember not to buy the wrong model to avoid installation issues or poor performance.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Where is the trunk switch on the Mazda 6 (Atenza)?

The Mazda 6 (Atenza) has three trunk switches in total: one on the key fob (with a dedicated trunk unlock button), another on the driver-side door unlock button, and the last one directly on the trunk lid (pressing this button unlocks the trunk). Below is additional information about the Mazda 6 (Atenza): 1. Launched in May 2014, the Mazda 6 (Atenza) inherited the design of the imported Mazda ATENZA. The new model was initially available in five variants: three with 2.0L engines and two with 2.5L engines. It achieved a minimum combined fuel consumption of 6.3L/100km and featured advanced technologies like i-STOP (idle stop system) and i-ELOOP (brake energy regeneration system). 2. On August 10, 2016, FAW Mazda launched the 6.5th-generation facelifted Mazda 6 (Atenza) with six trim levels as a mid-cycle refresh. The updated model adopted the full KODO design language, equipping all variants with new LED headlights (dubbed "Scorpion Eyes") that enhanced its existing aesthetic appeal of dynamism and speed with added elegance.
5
5
Share

What Causes the Brake Pump to Fail?

The reasons for brake pump failure are as follows: 1. The brake wheel cylinder is not a wear-prone component; its failure is usually due to quality issues. Dirty brake fluid can clog the brake lines, causing excessive pressure in the master cylinder, rendering the brakes ineffective and making the pump prone to damage. 2. Damage to the wheel cylinder is related to not replacing the brake discs and pads in time. When the brake discs and pads wear to their limits, continued use can lead to wheel cylinder damage. 3. Low-quality or aged brake fluid can corrode the sealing cups in the master cylinder, resulting in poor sealing, inability to maintain oil pressure, and subsequent pump damage. Here is some additional information about brake pumps: 1. The principle of car braking is friction. All cars use durable brake pads that press tightly against the rotating parts of the car, using friction to bring them to a stop. 2. The braking systems used in cars can be divided into two types: hydraulic braking systems and pneumatic braking systems. 3. The working principle of a hydraulic braking system is based on the physics concept that 'pressure is equal throughout a liquid.' It uses a sealed pipeline connected to a hydraulic pump. When the master cylinder applies pressure to the brake fluid, the incompressible liquid transmits the pressure to the wheel cylinders, causing the two pistons inside the wheel cylinders to extend outward under the liquid pressure, pushing the brake pads against the brake discs to generate braking force. Therefore, hydraulic pumps are essential in hydraulic braking systems.
3
5
Share

Why can't you drive in 2nd gear for more than 200 meters?

Subject 3 driving test regulations: Driving in 2nd gear must not exceed 200 meters, which is called "no long-distance driving in low gear." This is because the speed range of 2nd gear is 10-25 km/h, which is relatively low. Prolonged low-speed driving can affect traffic. The letters and numbers on a manual transmission include: P, R, 1, 2, 3, 4, 5, 6, etc., with the following meanings: 1. P gear: Parking gear. 2. R gear: Reverse gear. 3. 1st gear: Starting gear. The speed range is 0 km/h to 15 km/h. When going uphill or downhill, you must use 1st gear to regulate the speed using the engine's traction. 4. 2nd gear: Speed range is 10-25 km/h. 5. 3rd gear: Speed range is 20-45 km/h. 6. 4th gear: Speed range is 40-60 km/h. 7. 5th gear: Speed range is 75-90 km/h. 8. 6th gear: Speed is above 90 km/h.
6
1
Share

What happens if motor oil is not changed for a long time?

The consequences of not changing the oil for a long time are as follows: 1. If the oil is not changed for a long time, as the oil's lifespan deteriorates, its lubrication ability will rapidly decline, preventing the engine from receiving proper lubrication and leading to abnormal wear. 2. Metal debris cleaned by the oil cannot be expelled and accumulates inside the engine, causing dirt and generating a large amount of sludge. 3. The engine may experience increased fuel consumption, reduced power, difficulty starting, abnormal shaking, and poor operation. In severe cases, the engine may be directly rendered unusable. Here are the functions of motor oil: 1. Lubrication: There are many moving friction surfaces inside the engine. The oil forms a film between these surfaces to achieve lubrication and anti-wear effects. 2. Cleaning: The movement of engine components causes wear and produces metal debris. The oil continuously circulates inside the engine through the action of the oil pump and carries these metal debris back to the oil pan. 3. Cooling: The continuous circulation of oil inside the engine can carry away the heat generated by the engine and cool it through the oil cooler. 4. Sealing: The oil film formed on the surface of the engine cylinder walls and the inner surface of the valve guides can provide a sealing effect to prevent leaks.
3
1
Share

What causes the gear grinding when the Lavida's gear shift is not fully engaged?

If the gear grinding sound heard when shifting is very intense, it may indicate that the gear is possibly damaged. If the sound is moderate, it could be due to the following reasons: Clutch malfunction: Mechanical failure of the clutch prevents it from disengaging properly, leading to gear grinding during shifting. Operational reasons: This refers to improper use of the clutch, where the driver shifts gears without fully disengaging the clutch, resulting in a clicking noise and difficulty in engaging the gear. Gear grinding can cause long-term damage to the transmission. Looking down at the gear lever while shifting: Prolonged driving in low gear can also lead to this issue. Generally, higher gears are more fuel-efficient than lower gears, so it is advisable to upshift promptly after starting the vehicle.
14
0
Share

Can Audi cars be serviced outside?

Audi cars can be serviced outside, but it is recommended to go to a 4S shop or a professional repair shop. Definition of maintenance: Car maintenance refers to the preventive work of regularly checking, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car maintenance. Maintenance items: Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Purpose of maintenance: The purpose of car maintenance is to keep the car clean, normal technical condition, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.