Where is the Santana Fan Fuse Located?

Does the ETC application require the vehicle owner to be present?

Non-owners can also apply for ETC. According to the "Implementation Plan for Accelerating the Application of Electronic Non-Stop Toll Collection Services on Expressways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate, and the page of the registration certificate with the most recent annual inspection stamp are required. If applying on behalf of someone else, the original valid ID card of the agent is also needed. If applying for ETC through major bank branches, a debit or credit card from the corresponding bank must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding ETC with a debit card. The principle of ETC fee deduction: There will be one or more ETC lanes on expressways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to conduct back-end settlement with the bank, achieving the goal of vehicles not needing to stop at toll stations to pay bridge and road fees. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the target of "achieving a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the "13th Five-Year Plan." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate for passenger vehicles, efforts will also be made to promote ETC usage for trucks in the future. The deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination will be explored to provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stationary vehicle ahead, to prevent the ETC device of the vehicle ahead from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the vehicle ahead. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to fee deduction failure. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the expressway service office for testing. If the loosening or detachment is not due to human factors, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also cause fee deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass using cash or card payment. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

11

1

Share

Under what circumstances is one prohibited from reapplying for a driver's license within three years?

When an applicant obtains a motor vehicle driver's license through fraudulent means such as deception or bribery, they are prohibited from reapplying for a motor vehicle driver's license within three years. Below are the relevant details: 1. According to Article 13 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Individuals with organic heart disease, epilepsy, Meniere's disease, or other neurological disorders that affect limb movement and hinder safe driving. Those who have used or injected drugs within the past three years, or have not completed three years since the termination of compulsory isolation for drug rehabilitation, or are addicted to long-term use of dependent psychotropic drugs and have not yet quit. 2. Additional information: Physical requirements for applying for a driver's license: Height: For applicants applying for large passenger vehicles, tractors, city buses, large trucks, or trolleybuses, the height must be at least 155 cm; for medium-sized passenger vehicles, the height must be at least 150 cm. Vision: For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramways, the naked or corrected vision of both eyes must reach at least 5.0 on the logarithmic visual acuity chart.

1

3

Share

Can the ETC device be removed after installation?

ETC devices can be removed after installation. The installation steps for ETC are: 1. Prepare the ETC sensor (C device); 2. Peel off the adhesive strip on the back of the sensor and attach it to the right side of the rearview mirror on the windshield; 3. Insert the ETC card. Once the sensor detects the ETC card, the display will light up. ETC refers to the Electronic Toll Collection system, used for automatic toll collection on highways or bridges. The benefits of ETC include: 1. Saving time by eliminating the need to wait in line; 2. Vehicles can pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; 3. Reducing the frequency of vehicle starts and stops, which decreases wear and tear.

2

4

Share

What are the reasons why the Ford Kuga cannot shift gears in R gear?

The reasons why the Ford Kuga cannot shift gears in R gear are: incorrect gear selection, the handbrake not being released, or the transmission retaining spring popping out. When the Ford Kuga cannot shift gears in R gear, the brake pedal should be pressed, and the safety button on the gear lever or the gear shift lever should be pressed down to engage or disengage R gear. Reasons and solutions: Incorrect gear selection: Both P gear and N gear can be directly switched to R gear, but switching between forward gears and R gear should pause at N gear. If the gear selection is incorrect, the vehicle may not move when reverse gear is engaged. The owner only needs to follow the correct steps for starting an automatic transmission vehicle and restart the vehicle. Handbrake not released: Automatic transmission vehicles generally have either a mechanical handbrake or an electronic handbrake. For a mechanical handbrake, press the handbrake button and lift it slightly before releasing it. For an electronic handbrake, the motor may be stuck or the switch may be jammed. The owner can disconnect the battery negative terminal for a few minutes and then reconnect it. Transmission retaining spring popping out: This can cause a leak in the reverse gear oil circuit of an automatic transmission vehicle. Simply reinstall the retaining spring in the transmission, ensuring it is securely fastened to prevent it from popping out again, which would cause the vehicle not to move when reverse gear is engaged.

8

1

Share

What are the cargo bed dimensions of the Wuling Rongguang Pickup Double Cab?

The Wuling Rongguang Pickup features a reinforced cargo area with 7 cross beams, utilizing 85% high-strength steel in its construction. It adopts a one-time stamped frame for enhanced durability, with a rear cargo bed length of 2710mm and a double cab frame thickness of 140mm. More details about the Wuling Rongguang Pickup are as follows: 1. The safety of the Wuling Rongguang Pickup is derived from the Wuling Rongguang microvan. Building on the excellent design of the Rongguang, it optimizes and improves the front energy-absorbing structure of the passenger compartment, the passenger compartment design, and the body structure using CAE simulation technology and virtual 3D digital modeling. 2. Its front energy-absorbing structure is more effective in collisions compared to traditional micro vehicles, reducing harm to passengers and effectively ensuring their survival space. It is safer than traditional N1-class pickups. 3. The Wuling Rongguang Pickup is equipped with a 10-inch vacuum booster, increasing braking force to ensure quick and stable braking even when fully loaded. Its reliability bad road test mileage is 2.5 times higher than the national standard, and other related test standards far exceed the national requirements. It has passed severe overload and bad road tests at the Hainan Proving Ground, with a test mileage of 8100 kilometers.

19

5

Share

How Long is the Warranty Period for Used Cars Stipulated by Law?

Generally speaking, the warranty period for ordinary family cars is two years. For daily commuting in the city, the mileage within this two-year period usually does not exceed 50,000 kilometers, and the probability of quality issues arising within this range is relatively low. Below is additional information: 1. Used cars within the warranty period are more worry-free to use. Once the mileage exceeds 60,000 kilometers, minor issues are more likely to occur, and the repair costs will then be the responsibility of the owner. 2. There are two conditions for the warranty period: one is a time limit of 2 years, and the other is a mileage limit of 60,000 kilometers. If either of these conditions is met, the vehicle's warranty period is considered expired, and any subsequent normal maintenance or repairs will not be covered for free. 3. During the warranty period, not all repair costs are waived; it depends on the free items specified by the manufacturer. Usually, relevant descriptions can be found in the owner's manual and the after-sales departments of car 4S stores. 4. When purchasing a used car, remember to request all accompanying documents from the previous owner, including the warranty manual and invoice. The warranty manual can be used to check the vehicle's previous warranty records, ensuring that the car was maintained according to the manufacturer's requirements.

2

5

Share

Where is the Santana Fan Fuse Located?

Does the ETC application require the vehicle owner to be present?

Under what circumstances is one prohibited from reapplying for a driver's license within three years?

Can the ETC device be removed after installation?

What are the reasons why the Ford Kuga cannot shift gears in R gear?

What are the cargo bed dimensions of the Wuling Rongguang Pickup Double Cab?

How Long is the Warranty Period for Used Cars Stipulated by Law?

Where is the tire pressure reset button for the Wey VV5?

What are the advantages of Chery's 9-speed CVT over the 7-speed?

What Stage is a Vehicle Engine at 150,000 Kilometers Mileage?

What are the differences between a sludge suction truck and a cesspool suction truck?