Where is the Santa Fe engine number located?

1 Answers
JasperLynn
07/30/25 8:53am
The Santa Fe engine number is located on the left side of the engine, in the middle below the third cylinder spark plug. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.
Was this review help?
1
0
Share
More Forum Discussions

What does ETC stand for?

ETC is the abbreviation for Electronic-Toll-Collection, which translates to "electronic non-stop toll collection" (electronic toll collection) in Chinese. It is an automatic toll collection system for highways or bridges. According to the State Council's regulations, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. During free holiday periods, vehicles can still use the highway. For users who have installed ETC, passing through ETC lanes will not incur charges. ETC toll deduction principle: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, computer networking technology is used to settle accounts with the bank in the background. This achieves the purpose of vehicles not needing to stop at toll stations to pay tolls, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC passenger vehicle usage rate, the future will also promote the use of ETC for trucks and explore deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front that has stopped, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and toll payment for the front vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also lead to toll deduction failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause toll deduction failure. Follow the guidance of on-site staff to go to the manual MTC lane and use cash or card payment to pass. Thick car windshields may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
19
2
Share

Where is the Wiper Fuse Located in a Car?

The wiper fuse is typically located inside the fuse box in the engine compartment. Here are the specific details: The fuse box contains various types of fuses, and the design varies among different car models. To locate the wiper fuse, refer to the instructions on the fuse box cover. Generally, cars have two fuse boxes, each managing different circuits. Each fuse box comes with a white clip for replacing fuses. Common reasons for wiper fuse failure include: 1. Excessive resistance and current overload: Using unsuitable wipers or rusted wiper connections can increase resistance, leading to excessive current and fuse burnout. Solution: Apply grease to rusted parts or replace with suitable wipers. 2. Circuit issues: Using a fuse with too low a rated power or short circuits can cause the fuse to blow. Solution: Have the car inspected at a 4S shop.
20
3
Share

How often should the engine oil be changed for a Focus?

The oil change interval for a Focus depends on the type of oil used: mineral oil generally needs to be changed every 5,000 kilometers; semi-synthetic oil typically requires replacement every 7,000 kilometers; and full synthetic oil usually needs to be changed every 10,000 kilometers. More information about engine oil is as follows: 1. Engine oil serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and cushioning for the engine. 2. Engine oil is known as the 'blood' of a car. 3. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil, providing certain new characteristics, making them an important component of lubricating oil.
7
4
Share

How to Open the Hood of a Buick LaCrosse?

Here is the method to open the hood of a Buick LaCrosse: 1. Pull the hood release handle until the hood slightly opens. The release handle is located under the instrument panel on the left side of the steering column. 2. Walk to the front of the car and locate the auxiliary release handle. This handle is positioned near the center of the hood's front edge, on the passenger side. Push the auxiliary release handle towards the driver's side while lifting the hood. The method to close the hood is as follows: 1. Before closing the hood, ensure all filler caps are securely in place. 2. Lower the hood to an appropriate height above the vehicle and press down firmly to close it completely. Check to ensure the hood is securely closed, and repeat the process if necessary.
10
3
Share

Does Rain Affect the Car After Applying Paint Protection Film?

It is best to avoid exposure to rain immediately after applying the paint protection film. The film has not yet fully bonded with the car's paint, and there may still be small air bubbles that need to be removed through drying. Additionally, the edges of the newly applied film are not very secure, so it is advisable to let the car sit for a few more days to allow the film to adhere more firmly. Detailed explanations are as follows: 1. Avoid using high-pressure water jets: If the film has perfectly bonded with the car's paint, rain will not affect it, as water cannot penetrate the film. However, within the first month after application, it is best not to use high-pressure water jets to spray the seams of the paint protection film intensely, as this could loosen the edges and reduce its protective effect. 2. Car washing precautions: When washing the car, avoid scratching the film's surface with hard objects or scrubbing it too hard, as scratches and wear marks can affect the film's shine and overall appearance.
18
5
Share

What colors are available for the Lexus ES?

The Lexus ES is available in 9 colors: Sonic Quartz White, Sonic Titanium, Eminent White Pearl, Graphite Black Glass Flake, Mercury Gray Mica, Terrane Khaki Mica, Deep Blue Mica, Autumn Shimmer, and Garnet Red Mica. More information about the Lexus ES is as follows: 1. The new Lexus ES has been officially launched, with a total of 8 models available in three powertrain options: 2.0L+6AT, 2.5L+8AT, and 2.5L hybrid. 2. The new Lexus ES models are classified as ES-200, ES-260, and ES-300h, which are equipped with a 2.0L, 2.5L naturally aspirated engine, and 2.5L hybrid system respectively. The ES-260 also offers a more sporty and aggressive F-Sport version.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.