Where is the Roewe 750 cabin air filter located?

2 Answers
OAllison
07/25/25 1:46pm
The cabin air filter of the Roewe 750 is located under the wiper cover plate on the right side of the front windshield in the front passenger area. The replacement method is as follows: 1. Open the engine hood; 2. Remove the wiper cover plate; 3. Take out the old cabin air filter and replace it with the new one. The dimensions of the Roewe 750 are: length 4865mm, width 1765mm, height 1422mm, with a wheelbase of 2849mm and a minimum ground clearance of 10mm. The Roewe 750 is equipped with a 1.8T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 160PS, maximum torque of 215Nm, maximum power of 118kW, maximum power speed of 5500rpm, and maximum torque range of 2500 to 4500rpm. It is paired with a 5-speed automatic transmission.
Was this review help?
10
2
Share
Lee
08/11/25 8:53pm
The air conditioning filter of the Roewe 750 is generally installed inside the glove compartment in front of the front passenger seat. To locate it, first open the glove compartment door, then remove the storage tray inside. You'll find a small cover or clip on the rear wall. Open that cover, and the filter is hidden behind it. Based on my experience, the location is designed to be user-friendly, and it's not too difficult to replace it yourself. Remember to check it every six months or 10,000 kilometers, especially in big cities with lots of dust. Otherwise, a clogged filter will reduce the air conditioning efficiency, and the air blown out in summer may have a musty smell, which is also not good for breathing. If you're not familiar with the process, it's recommended to refer to the official Roewe manual or ask a friend for help to avoid damaging the plastic parts of the glove compartment. When replacing the filter, choose an activated carbon version for better filtration and odor removal, making the air in the car fresher.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the reason why a motorcycle does not move when in gear?

It may be due to a damaged automatic centrifugal clutch. Below is relevant information: Motorcycle: A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrol, passenger and cargo transportation, as well as a sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. Power knowledge: Horsepower was originally defined by the French and Germans. However, since the horses used to measure horsepower were smaller than average, an engine with 50 horsepower should not be imagined as being pulled by 50 horses, but rather by about 35 horses. The unit (ps) used to represent horsepower was first introduced by the Germans and is still in use today.
11
3
Share

What are the differences between the Magotan and the Phaeton?

There are several main differences between the Magotan and the Phaeton: 1. Different powertrains: The Magotan uses three engines, namely a 1.4-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine; the Phaeton uses six engines, namely a 3.0-liter naturally aspirated engine, a 3.0-liter turbocharged engine, a 3.2-liter naturally aspirated engine, a 3.6-liter naturally aspirated engine, a 4.2-liter naturally aspirated engine, and a 6.0-liter W12 engine. 2. Different positioning: The Magotan is a mid-size sedan; the Phaeton is a full-size luxury sedan. 3. Different comfort levels: The Phaeton is several grades higher than the Magotan in terms of comfort.
9
2
Share

Is the Electronic Signature for Subject 3 Important?

Subject 3 electronic signature is very important. Here are the relevant details: Subjects 1 and 3: Those who have not signed need to go to the Guang'an Vehicle Management Office to complete the signature. If you pass the Subject 3 test but forget to sign, you may not be able to schedule the Subject 4 test. Alternatively, you can complete the signature for the unsigned score sheet after finishing Subject 4. Subject 2: Those who have not signed can complete the signature at the Subject 2 window of the Huaying test site when taking Subject 3. If you do not complete the signature during the Subject 3 test, you will need to go to the Guang'an Vehicle Management Office to sign. Safety and Civility: The driving common sense test generally includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
18
4
Share

What to Do When the Key Won't Turn or Open the Lock?

Here are the specific reasons why the key won't turn or open the lock: 1. Improper steering wheel angle: After starting the vehicle with the key, the steering wheel automatically unlocks. Sometimes, when parking, the steering wheel is positioned at a certain angle where the key can only turn to ignite but not unlock, resulting in the key not turning. You can gently turn the key with your right hand while lightly rotating the steering wheel with your left hand to naturally unlock the steering wheel. 2. Steering wheel lock: When the car is turned off, if the steering wheel is turned left or right or the wheels are not straight when parking, the force can cause the steering wheel to rotate, triggering the self-locking function. The steering lock pin engages with the steering column, making the steering wheel immovable. Even if you insert the key and try to turn it forcefully, it won't budge. This is the vehicle's anti-theft system perceiving a theft risk, thus locking the steering wheel to prevent theft.
5
5
Share

What Type of License is a Motorcycle License?

Motorcycle license is a Class D license. Introduction to Class D License: A Class D license allows the holder to drive three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. It also permits driving two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h, as well as motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. Introduction to Class E License: With a Class E license, one can legally drive two-wheeled motorcycles with an engine displacement greater than 0.5L or a speed exceeding 50km/h, and it also covers the vehicle types permitted by a Class F license. A Class F license allows the holder to legally drive light motorcycles with an engine displacement less than 0.5L or a speed below 50km/h.
18
2
Share

How to Increase the Extension and Retraction Speed of Hydraulic Cylinders?

Here are the relevant introductions to increase the extension and retraction speed of hydraulic cylinders: 1. Replace the piston: The movement speed of a hydraulic cylinder is the ratio of the flow rate entering the cylinder to the effective area of the piston. Due to leakage, the actual flow rate pushing the piston decreases, thus reducing the cylinder's movement speed. At this time, the piston should be replaced to ensure a reasonable gap between the piston and the cylinder barrel. If the piston seal ring is damaged, it should be replaced with a new one. 2. Replace the directional valve: Severe internal leakage in the directional valve occurs because the sealing relies on the gap between the valve core and the valve hole. Various reasons cause the gap between the valve core and the valve hole to increase, allowing the pressure oil from the pump to flow from the high-pressure chamber to the low-pressure chamber through the internal annular gap after entering the directional valve, significantly reducing the oil flow rate through the directional valve. As a result, the flow rate entering the hydraulic cylinder decreases. Therefore, users need to replace the directional valve.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.