Where is the right-side reinforcement rib located in a car?

How long does it take for a car battery to fully charge after starting?

If the battery is in good condition, driving for about 20 minutes after starting can fully charge the battery. Here is some relevant information about car batteries: 1. Introduction: A car battery refers to a rechargeable battery that can be reused after discharging. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. In a lead-acid battery, the positive electrode is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge (use), the positive and negative electrodes react with sulfuric acid to form lead sulfate. When the concentration of the sulfuric acid solution drops to a certain level, the battery must be recharged. Using an external power source for charging can restore the electrodes and solution to their original state, allowing the battery to be reused after charging. 2. Classification: Ordinary batteries, dry-charged batteries, and maintenance-free batteries.

4

Share

Does enabling hidden car features affect the vehicle?

Enabling hidden car features not only increases fuel consumption but also reduces engine lifespan. Below are relevant details about enabling hidden car features: 1. Definition: Enabling hidden features refers to ECU remapping, also known as ECU upgrading, which involves rewriting programs and optimizing parameter settings to achieve effects such as increased horsepower, enhanced torque, or reduced fuel consumption. 2. Consequences: During the warranty period, authorized dealerships (4S shops) will not provide warranty coverage; additionally, vehicles with modified engine control units may experience significantly reduced resale value and accelerated aging. If the modification is performed to enhance power output, it will not only increase fuel consumption but also shorten the engine's service life.

20

4

Share

What is the passing score for C1 driving test subject 2?

The passing score for the C1 driving license subject 2 test is 80 points. The C1 subject 2 test mainly consists of five items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. For automatic transmission (C2) subject 2, the hill start and stop is not tested. A C1 driving license allows the holder to drive small and micro passenger vehicles. C1 driving test consists of four subjects, the other subjects are as follows: Subject 1: Mainly tests basic knowledge of road traffic; Subject 3: Mainly tests 16 driving skills including preparation before starting, starting, and driving straight; Subject 4: Mainly tests the requirements for safe and civilized driving operations, similar to subject 1, it is a theoretical test. Subject 2 test tips: During the subject 2 test, before driving, adjust the seat height, adjust the rearview mirror to ensure a wide field of vision, and fasten the seat belt. During the test, do not stop unless the voice prompt indicates failure. For parallel parking, remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. For hill start, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gradually release the clutch while stepping on the accelerator to avoid stalling or rolling back. For right-angle turning, find the reference point before turning and coordinate with the car's speed. For curve driving (S-curve), slow down and drive carefully. For reversing into a garage, control the speed, find the reference point, and make minor adjustments if the rearview mirror shows any deviation. Subject 2 deduction items: Reversing into a garage: Vehicle body out of line, deduct 100 points, judged as failure; failure to reverse into the garage, deduct 100 points, judged as failure; stopping midway, deduct 5 points each time; failure to complete the test within the specified time, deduct 100 points, judged as failure. Parallel parking: Vehicle body out of line after stopping in the garage, deduct 100 points, judged as failure; stopping midway, deduct 5 points each time; tires or vehicle body touching the curb line while driving, deduct 10 points; failure to complete the test within the specified time, deduct 100 points, judged as failure. Curve driving: Wheels touching the road edge line, judged as failure; stopping midway, judged as failure; driving gear not in second gear or above, deduct 5 points. Right-angle turning: Wheels touching the road edge line, judged as failure; stopping midway, deduct 5 points each time. Hill start and stop: After the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line and exceeds 50cm, judged as failure; exceeding the specified start time, judged as failure; after the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line but does not exceed 50cm, deduct 10 points; after the vehicle stops, if the body is more than 30cm but less than 50cm from the road edge line, deduct 10 points. Failure to tighten the parking brake after stopping, deduct 10 points. C1 driving test passing standards: Traffic laws and related knowledge – 90 points to pass. Field driving – 80 points to pass. Road driving – 80 points to pass. Safe and civilized driving knowledge – 90 points to pass.

15

3

Share

What Causes Insufficient Power in a Turbocharged Engine?

Insufficient power in a turbocharged engine may be caused by inadequate air tightness of the boost pump leading to air leakage, or leaks in the intake pipeline. Below is relevant information about turbocharged engines: 1. Working Principle: The full name of turbocharging is exhaust gas turbocharging, generally denoted by "T". Turbocharging is a device that uses high-speed gases from the exhaust pipe to drive the rotor's rotation, thereby increasing the airflow pressure in the intake pipe. Increasing the airflow pressure allows more air, meaning more oxygen, to enter the cylinder, resulting in more complete combustion and greater power. 2. Function of the Turbocharger: The turbocharger utilizes the speed of high-speed exhaust gases, enabling the turbocharger rotor to achieve very high rotational speeds, with maximum speeds even reaching around 150,000 rpm.

8

5

Share

Why Does a Car's Engine Sound Louder in Winter?

In winter, the engine often operates with a larger throttle opening to reach its optimal working temperature and power various equipment, which results in increased engine noise. Once the equipment is running normally and the engine reaches its standard temperature, the throttle opening reduces, leading to a decrease in noise. Models equipped with turbocharged engines tend to produce even louder noises during cold starts. Below is an introduction to engine operation: 1. Starting: After a car has been parked for an extended period, the engine oil flows back to the oil pan at the bottom of the engine. Therefore, when starting the engine after prolonged disuse (such as overnight), the upper part of the engine is initially without oil and lacks lubrication. It takes approximately 30 seconds after starting for the oil pump to circulate oil to critical lubrication points such as the pistons, connecting rods, and crankshaft. However, even if you start driving immediately after ignition, as long as you avoid aggressive acceleration and maintain low-speed operation, the effect is similar to idling. 2. Precautions: It is advisable to allow the vehicle to warm up sufficiently for 2-5 minutes while stationary, avoiding aggressive driving during this period to prevent engine damage. Once the coolant temperature rises to the normal range, both the engine speed and noise will naturally return to normal levels.

14

2

Share

How to Reverse into the Garage in Subject 2?

Here is the relevant introduction on how to reverse into the garage in Subject 2: 1. Keep an eye on the rearview mirrors: When reversing into the garage in Subject 2, always keep an eye on the left and right rearview mirrors. If you notice one side is wider, slightly turn the steering wheel in that direction to prevent the other side from crossing the line. Also, when initially determining the timing to fully turn the steering wheel, make sure to turn it decisively without hesitation. 2. Maintain distance: During the process of fully turning the steering wheel and reversing, the rear of the car gradually enters the garage. Just before entering, the wheels should maintain a distance of 30cm from the garage corner. Students should constantly observe through the rearview mirrors and make corrections if the distance is less than or greater than 30cm, otherwise, the line will definitely be crossed after entering the garage.

15

2

Share

Where is the right-side reinforcement rib located in a car?

How long does it take for a car battery to fully charge after starting?

Does enabling hidden car features affect the vehicle?

What is the passing score for C1 driving test subject 2?

What Causes Insufficient Power in a Turbocharged Engine?

Why Does a Car's Engine Sound Louder in Winter?

How to Reverse into the Garage in Subject 2?

What Does Driving Mode Mean?

What documents are needed for vehicle inspection?

What Brand of Motorcycle is Aprilia?

Which button is used to lock the car door on the car key?