Where is the reversing radar module located on the Mercedes-Benz E260?

1 Answers
JoannaAnn
07/30/25 1:22am
The reversing radar module of the Mercedes-Benz E260 is located on the right side of the trunk. Function of the reversing radar: The reversing radar is a safety auxiliary device when parking or reversing the car. It can inform the driver of the surrounding obstacles through sound or more intuitive display, eliminating the troubles caused by the driver's need to look around when parking, reversing, and starting the vehicle, and helping the driver to eliminate blind spots and blurred vision. The main functions of the reversing radar include: Accurately measuring the distance between the rear of the car and the nearest obstacle; when reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; it can repeatedly emit a voice warning sound to remind pedestrians to pay attention.
Was this review help?
7
5
Share
More Forum Discussions

Is there a voice prompt for gear shifting in Subject 3?

There is no voice prompt for gear shifting in Subject 3, but there is a distance limit. Within the specified distance, you must shift from first gear to third gear, otherwise you will fail. The time for gear shifting in Subject 3 is usually one minute and thirty seconds. The driving distance using first and second gears should not exceed 500 meters. In the Subject 3 test, you start with first gear and can shift to second gear once the vehicle starts moving. When driving in second gear, accelerate to 20 km/h to shift to third gear. When the speed exceeds 30 km/h, you can shift to fourth gear. When turning halfway, accelerate to shift from second gear to third gear. After shifting to third gear, release the throttle. Once the turn is completed, the system will prompt you to shift down to second gear (you must complete the action within five seconds). Then, the system will prompt you to shift up to third gear again, also within five seconds. During the test, when you hear the voice prompt "Please complete the gear shifting action," you should adjust the gear to second gear, then sequentially shift up to fifth gear. In fifth gear, the speed must exceed 40 km/h, and then you should sequentially shift down to second gear. Gear and speed must match. Check the dashboard. When passing through school zones, you must be in third gear at speeds below 30 km/h. Using fourth gear or exceeding 30 km/h will result in failure. Remember to downshift when reducing speed. When shifting gears, press the clutch all the way down, shift gears, release the clutch, and accelerate. Do not release the clutch too quickly to avoid vehicle jerking. Do not skip gears when upshifting, and do not look at the gear lever when shifting.
14
2
Share

How many test sessions are there for Subject 1 in one day?

There are five test sessions scheduled for Subject 1 each day. The first session starts at 9:00, the second at 10:00, the third at 13:00, the fourth at 14:00, and the fifth at 15:00. Subject 1 does not limit the number of test attempts. Each test has two opportunities. If both attempts fail, you need to reschedule the test. The test process for Subject 1: Follow the staff's instructions and receive your driving training file in order at the waiting area; Bring and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the test area; No loud talking is allowed in the test area; Regulation textbooks are not allowed in the test area (or should be kept in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test will sign under the guidance of the staff at the exit and then leave the test area; Candidates who fail the test may leave the test area and wait for notification from their driving school regarding the retest time.
1
0
Share

Which car has a lion head logo?

The Peugeot logo features a lion head. Peugeot is an automobile brand under Peugeot Automobile Company, a subsidiary of the French PSA Peugeot Citroën Group. Its models include the Peugeot 5008, Peugeot 4008, Peugeot 3008, Peugeot 2008, Peugeot 208, Peugeot 408, etc. Taking the 2020 Peugeot 408 as an example: its body dimensions are 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. The 2020 Peugeot 408 is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 136PS, a maximum power of 100kW, and a maximum torque of 230Nm, paired with a 6-speed dual-clutch transmission. The front suspension of the 2020 Peugeot 408 is a MacPherson independent suspension, and the rear suspension is a longitudinal trailing arm semi-independent suspension.
20
4
Share

What is the minimum ground clearance of the new Highlander?

The minimum ground clearance of the new Highlander is 203 mm when unloaded and 160 mm when fully loaded. The height between the chassis and the ground is referred to as the minimum ground clearance, also commonly known as the chassis height. The higher the chassis, the larger the obstacles it can overcome. In terms of exterior design, the Highlander features a stylish and premium look, with an elegant and bold appearance. The triangular headlights, hexagonal front grille design, integrated Toyota emblem, thick chrome accents, chrome-framed fog lights, and slightly forward-leaning front fascia give the entire front end a fashionable and three-dimensional appeal. As for the interior, the Highlander boasts a simple and elegant design with a generous layout. Although there are numerous buttons on the center console, they are well-arranged for convenient operation. The craftsmanship is refined, with even seams, and the interior color scheme exudes a noble and classic feel. It is also well-equipped with rich features.
1
3
Share

How to turn off the auto start-stop function on the 2019 Sagitar?

Method to turn off the auto start-stop function on the 2019 Sagitar: The auto start-stop switch is located in front of the gear lever, with a button marked by a circle containing a capital 'A' and 'OFF' below. The auto start-stop system is automatically enabled when the ignition is turned on, and can be deactivated by simply pressing the button. The Sagitar is a compact car under FAW-Volkswagen, with dimensions of 4753 mm in length, 1800 mm in width, and 1462 mm in height, and a wheelbase of 2731 mm. In terms of exterior design, the chrome trim added to the lower character line on the side of the Sagitar connects the chrome trims of the front and rear bumpers, creating a more fluid visual effect. The rear also features a horizontally stretched design, with two horizontal lines on the widened trunk lid seamlessly integrating with the taillights and rear bumper.
14
5
Share

What brand is jeep?

jeep is a brand of cars, an American automobile brand mainly manufacturing off-road vehicles and SUVs. As an American brand, jeep cars have a rugged exterior and interior design, in line with the American tough-guy style. The Renegade is a compact SUV under the jeep brand. In terms of body dimensions, the Renegade measures 4245 mm in length, 1805 mm in width, and 1695 mm in height, with a wheelbase of 2570 mm. As for the interior, the Renegade does not have the old-fashioned impression often associated with jeep; the cabin is full of personality and liveliness, with air vents, audio units, and gear lever bases adorned in different colors. Additionally, the three-spoke steering wheel integrates a multitude of functional buttons.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.