···
Log in / Register

Where is the reversing camera installed on the Baojun RC6?

6Answers
LeRosalie
07/23/2025, 02:32:23 PM

The reversing camera of the Baojun RC6 is generally installed at the position of the license plate light. Here is a detailed introduction to the meanings of different colored trajectory lines in the reversing camera: Red trajectory: Indicates the warning line, which is 30cm away from the rear of the car. When the car reaches near this line, the parking space is just right, and no further reversing is allowed. Yellow trajectory: Indicates the deceleration line, which is 60cm away from the rear of the car. You can continue to reverse, but pay attention to decelerating and checking the distance. Green trajectory: Indicates the normal safety line, where the distance between the obstacle and the rear of the car is relatively large, so you can reverse with confidence.

Was this review help?
116
Share
MacAmy
08/10/2025, 10:10:01 AM

I'm quite familiar with the installation position of the Baojun RC6's reversing camera, having driven this car for a while. The camera is usually mounted on the rear bumper, right above or below the license plate, ensuring a proper angle for full coverage of the rear view and eliminating blind spots. The display is the large touchscreen on the center console, which automatically switches to the rearview image when reverse gear is engaged—simple and intuitive to operate. This design not only looks good but also enhances safety. For example, when reversing in crowded residential areas, it clearly shows the road conditions behind the car. I recommend owners occasionally clean the camera lens to prevent dirt from obstructing the view. The factory installation is secure, with minimal loosening. Overall, the well-chosen position makes reversing much easier, eliminating the need to look back.

Was this review help?
19
Share
Expand All
CharlieLynn
09/22/2025, 04:58:02 AM

The reversing camera on my Baojun RC6 works really well. The camera is installed in that small area next to the rear license plate, roughly at the center of the bumper, and it can fully capture the scenery behind. The display is integrated into the large central control screen inside the car, and it automatically pops up when reversing, with a pretty clear picture. It's especially convenient for parking, particularly at night or on rainy days when the lighting is poor—you can still see clearly. Sometimes when elderly family members sit in the back seat, there's no need to worry about hitting anything while reversing, as the position is safe and reliable. If you're concerned about installation, the factory-installed one is very sturdy, with no noise, and it works smoothly. Remember to check regularly if the image is blurry and wipe off any dust promptly.

Was this review help?
2
Share
Expand All
VonBraxton
11/05/2025, 10:17:48 PM

The reversing camera of the Baojun RC6 is located above the rear license plate, with a standard installation point that is not too obtrusive. The display is part of the car's central control screen, and the image is directly shown when the reverse gear is engaged. The position is reasonably designed to reduce blind spots. I have wiped the lens during my own maintenance to ensure stable signal transmission. Simple and practical.

Was this review help?
18
Share
Expand All
VanMaria
12/27/2025, 12:05:21 AM

The installation position of the Baojun RC6's reversing camera system is noted to be at the center rear of the vehicle, with the camera fixed near the license plate area, providing a blind-spot-free rear view. The display is set on the central control screen, allowing one-touch switching to the reversing image while driving. This position performs well in harsh weather conditions, enhancing safety. It is recommended to occasionally check the wiring connections to avoid loose connections affecting the image quality, as the original factory quality is reliable and ensures smooth operation.

Was this review help?
8
Share
Expand All
OAnnie
03/24/2026, 04:26:22 AM

The daily-use Baojun RC6 reverse camera is positioned near the license plate on the rear bumper, offering precise angles and clear imaging. The display is integrated into the large central control screen in front of the driver's seat, automatically switching to the real-time feed when reversing. The system activates immediately upon shifting into reverse gear, with a discreet design that ensures easy maintenance—such as regular lens cleaning for optimal clarity. Post-installation stability is excellent, reducing concerns during nighttime driving.

Was this review help?
17
Share
Expand All
More Q&A

Where is the ACC wire on a motorcycle?

Motorcycle ACC wire is located in the central control system. Introduction to ACC: Adaptive Cruise Control is an intelligent automatic control system developed based on existing cruise control technology. Principle of ACC: During vehicle operation, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while wheel speed sensors collect speed signals. When the distance to the preceding vehicle becomes too small, the ACC control unit can coordinate with the anti-lock braking system and engine control system to apply appropriate wheel braking and reduce engine output power, ensuring the vehicle maintains a safe distance from the vehicle ahead.
104
Share

What does it mean when a vehicle has not been inspected on time?

"Not inspected on time" means that the vehicle has not undergone its annual inspection by the due date. If a vehicle's annual inspection is overdue, the owner must go to the public security traffic management department to accept penalties, which may include a warning or a fine. After the penalty is paid, the vehicle can proceed with the normal inspection process. Once a motor vehicle's inspection is overdue for more than three months, the vehicle will be forcibly scrapped and will not be allowed on the road. Relevant information: An overdue vehicle inspection means that the vehicle has exceeded the inspection deadline. The penalties for an overdue inspection include: 1. Vehicles that do not undergo the annual inspection on time are not allowed on the road. If such a vehicle is driven, the driver will be penalized with a 3-point deduction and a fine. 2. If an uninspected vehicle is involved in a traffic accident, the driver will bear full or primary responsibility, and the insurance company will not provide compensation. 3. Driving a vehicle that has not undergone the annual road inspection is considered illegal driving, and the vehicle may be impounded. Methods to handle an overdue vehicle inspection: 1. If a vehicle's annual inspection is overdue, the owner must go to the traffic management department to accept penalties before proceeding with the normal inspection. Driving a vehicle with an overdue inspection is illegal, so it is recommended to have the inspection done promptly. 2. According to the motor vehicle registration regulations, if a vehicle fails to undergo a safety technical inspection within the specified period, the public security traffic management department will issue a warning or impose a fine. 3. Driving a vehicle without an inspection is considered illegal, and if an accident occurs, the insurance company will not provide compensation. Therefore, vehicle owners should ensure their vehicles undergo the annual inspection on time.
106
Share

Does the Li ONE need refueling?

Li ONE does not require refueling, but it can be refueled when out of battery. Here is more information about Li ONE: 1. Suspension: The front suspension adopts MacPherson independent suspension, and the rear suspension uses a multi-link independent combination. 2. Body dimensions: Li ONE is an extended-range hybrid electric vehicle with body dimensions of 5020mm in length, 1960mm in width, 1760mm in height, and a wheelbase of 2935mm. 3. Ground clearance: The minimum ground clearance is 180mm, the body weight is 2300kg, and the fuel tank capacity is 45 liters.
113
Share

Is there any problem with keeping the car air conditioner on all the time?

No problem, it just consumes relatively more fuel. Here is detailed information about car air conditioning: 1. Definition: The car air conditioning device (air-conditioning-device), referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving. 2. Content: It generally includes a cooling device, heating device, and ventilation device. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation, making it a popular modern car air conditioning system internationally.
104
Share

What is the equivalent car engine displacement for a 250cc motorcycle?

250cc motorcycles have a fuel consumption close to that of a 1.5-liter displacement sedan. The relationship between displacement and fuel consumption: Currently, mainstream 250cc motorcycles on the market generally consume between three to four liters of fuel. With proper driving techniques, a 1.5-liter sedan can maintain a fuel consumption of four to five liters per 100 kilometers when cruising at a speed of 50-60 km/h. Reasons for higher heat generation in motorcycles: Motorcycles operate at higher temperatures and dissipate more heat. Modern motorcycles commonly use high-revving, high-compression ratio, and high-power engines, which result in significantly elevated engine temperatures. Consequently, many motorcycle engines now incorporate water cooling, oil cooling, or forced air cooling systems.
117
Share

Is a 250cc motorcycle considered a small displacement?

Is a 250cc motorcycle considered a small displacement? The following is the relevant introduction: 250cc motorcycle: refers to a motorcycle with a displacement of 250CC, which is equivalent to a 0.25L displacement in cars. Principle: Generally, common motorcycles are divided into two-stroke and four-stroke types. Two-stroke motorcycles are almost obsolete. The principle is that in a two-stroke engine, the crankshaft rotates once per cycle, and the piston moves up and down twice, completing the four processes of intake, compression, power, and exhaust, i.e., completing one working cycle. A four-stroke engine takes twice as long as a two-stroke engine. Currently, most motorcycles on the market are four-stroke.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.