Where is the Reverse Gear?

1 Answers
LePhoebe
07/30/25 9:02am
The reverse gear is marked as "R" and is usually labeled on the top of the gear lever or on the cover. There are several ways to engage the reverse gear by pulling the gear lever: 1. Press the gear lever downward to engage the reverse gear (common in manual transmissions, and some automatic transmission models also use this method). 2. Pull the gear lever directly to the reverse position, which can be done in either a curved or straight path. This is a method used in automatic transmissions, and the curved path is more common nowadays to prevent incorrect gear selection. 3. Some gear levers have a lock mechanism, either ring-shaped or single-sided. Hold the gear lever and lift the lock with your fingers to engage the reverse gear. 4. Lift the gear lever upward to engage the reverse gear.
Was this review help?
1
1
Share
More Forum Discussions

What does 'auto' mean for car headlights?

Car headlight 'auto' refers to automatic headlights. When the light intensity is greater or less than a certain value, the headlights will automatically turn on or off. The advantage of automatic headlights is that they can automatically control the turning on and off of the lights. For example, when entering a tunnel suddenly during the day and forgetting to turn on the lights, the automatic headlights can turn on by themselves. Or in the early morning or evening when the light is poor, the headlights will automatically turn on to illuminate the road ahead, improving driving safety. The full name of automatic headlights can be called automatic light-sensing headlights, which mainly rely on ambient light sensors to determine whether the lights need to be turned on. This sensor can automatically perceive the brightness of the external environment. When the brightness of the external environment is lower than a certain value, it will control the headlights to turn on automatically. When the external brightness is higher than a certain value, the headlights will automatically turn off.
14
5
Share

How to turn on the air conditioning in the Baojun 730?

To activate the cooling effect of the air conditioning in the Baojun 730, you need to press the AC cooling button on the car and then rotate the temperature adjustment knob to the cooling zone. If you want to turn on the heating, simply turn off the air conditioning cooling system and rotate the knob to the heating zone. The air conditioning control area of the Baojun 730 is located in the center below the car's dashboard. The AC button activates the air conditioning compressor, which starts the cooling process once engaged. The dimensions of the 2019 Baojun 730 CVT version are 4710mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. The 2019 Baojun 730 CVT version comes standard with an 8-inch floating central multimedia screen, while higher-end models feature a 7-inch full LCD instrument panel. It is equipped with functions such as Carplay and the SSPLINK in-car connectivity platform, supporting both Android and Apple systems simultaneously.
5
3
Share

Where is the OBD interface located in the Renault Fluence?

The OBD interface in the Renault Fluence is located below the steering wheel near the door. You can see it by removing the floor mat and opening the cover plate. The OBD interface itself is not designed for external connections, and external products may affect the car itself through the OBD interface due to their own malfunctions or instability. The Renault Fluence has a length, width, and height of 4618mm, 1813mm, and 1488mm respectively, with a wheelbase of 2702mm. The drive system is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam suspension. The front face of the Renault Fluence has undergone significant changes, with the front grille style redesigned to enhance its three-dimensional effect, and the Renault logo is more prominent.
14
5
Share

What does it mean when the ABS light appears on the car dashboard?

The appearance of the ABS light on the car dashboard indicates a malfunction in the vehicle's anti-lock braking system. Common causes include: 1. Damaged or dirty wheel speed sensors; 2. Damaged or dirty signal wheels; 3. Faulty ABS control unit; 4. Loose connections or broken circuits in the ABS wiring. If the ABS light comes on, it is recommended to visit a repair facility as soon as possible for inspection and repair to determine the cause of the fault. The function of the ABS (Anti-lock Braking System) is to automatically control the braking force during car braking, preventing the wheels from locking up and keeping them in a state of rolling and sliding. The ABS typically consists of components such as wheel speed sensors, brake pressure modulation devices, ABS electronic control units, and ABS warning lights.
12
0
Share

Where is the air conditioning filter of the Mondeo located?

The air conditioning filter of the Mondeo is located on the right side of the driver's side accelerator pedal, and the accelerator pedal needs to be removed to access it. The function of the air conditioning filter is to filter the air entering the cabin from the outside, improving air cleanliness. Generally, the filtering material targets impurities in the air, including tiny particles, pollen, bacteria, industrial exhaust, and dust. The Mondeo is a mid-size sedan with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. The Mondeo features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is a unibody design.
8
1
Share

Does it matter if windshield washer fluid accidentally spills outside?

It does not matter if windshield washer fluid accidentally spills outside. High-quality automotive windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Windshield washer fluid is something many car owners use regularly during vehicle maintenance. It helps clean the front windshield, preventing dirt from obstructing the driver's view. There is a windshield washer fluid reservoir in the engine compartment of a car, which stores the fluid. Car owners need to fill the reservoir in advance, and when needed, the washer nozzles on the hood can spray the fluid onto the windshield.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.