···
Log in / Register

Where is the reset button for the Geely Emgrand center control screen?

4 Answers
McNorah
07/24/25 5:04am
In the center control screen. Here are detailed introductions about the Geely Emgrand: 1. Overview: The Geely Emgrand is a compact car under Geely, with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. The Emgrand EC718 and EC718-RV are the first B-segment sedans from Geely, available in three-box and two-box versions respectively. 2. Configuration: The Geely Emgrand features a MacPherson independent front suspension and a torsion beam non-independent rear suspension, with front-wheel drive. It is equipped with a 1.5L naturally aspirated engine and a 1.3T turbocharged engine, paired with a CVT transmission.
Was this review help?
14
0
Share
StBeckett
08/10/25 11:09pm
I've been driving an Emgrand for several years, and screen freezes are quite common. The reset button is usually located in the lower right or upper right corner of the infotainment screen, marked by a small pinhole. You can gently press it with a SIM ejector tool or toothpick to reboot the system. If pressing doesn't work, try holding down the volume decrease button and power button simultaneously for about 10 seconds. A reset can resolve crashes or black screen issues, but avoid overusing it to prevent system damage. This method has consistently worked for me whenever I encounter problems, provided the car is in park. Note that reset button locations may vary by model year - post-2020 Emgrands might have it relocated to the dashboard side panel, so always consult your owner's manual. For maintenance, regularly clear cache and check for software updates to prevent frequent screen lags and extend your infotainment system's lifespan.
Was this review help?
1
5
Share
Expand All
VanLuke
09/24/25 6:16am
From a technical perspective, the reset button for the Emgrand's central control screen is typically a small physical hole located near the screen bezel, requiring a fine needle to press. Sometimes, button combinations are more effective, such as simultaneously holding the HOME button and volume control for 5-10 seconds to force a reboot. Resetting is highly useful for refreshing the system to resolve lagging or Bluetooth malfunctions, but avoid unnecessary attempts to prevent accidental settings changes. I recommend first ruling out other causes, such as loose plugs or a depleted battery. The exact location varies by model, with newer Emgrand versions possibly integrating it into the touch menu. Here's a tip: Avoid prolonged exposure to high temperatures during regular use, and periodic maintenance can reduce the need for resets.
Was this review help?
17
3
Share
Expand All
DeJonathan
11/07/25 8:26am
For beginners driving an Emgrand, I often encounter an unresponsive screen. The reset button is located in a small hole at the lower right corner of the center console screen. Gently pressing it with a needle can reboot the system. If that doesn't work, try pressing a specific button combination, such as the volume + and power buttons simultaneously. Resetting can solve minor issues but doesn't guarantee fixing all faults, so identify the cause before rushing to operate. The location may vary depending on the car model; for my 2021 model, it's at that hole. Always ensure the car is parked and stable before operating—safety first.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Where is the tire pressure monitoring button on the Changan CS75?

The Changan CS75 does not have a direct button for tire pressure monitoring. You need to use the square button and the inverted triangle button on the steering wheel to switch and find it. The tire pressure information of the Changan CS75 will be displayed in the center of the dashboard, which can provide early warning of abnormal tire pressure conditions, preventing accidents before they occur. Drivers do not need to get out of the car to check; they can monitor the internal condition of the tires at any time while sitting in the car, ensuring driving safety. The Changan CS75 originates from Changan's global R&D platform, incorporating international avant-garde design elements into its exterior styling, creating a brand-new urban SUV with a highly contemporary aesthetic. The overall appearance is bold and rugged, with a body that exudes strength, tension, and a harmonious yet stable demeanor.
1
3
Share

Why does the Chery Ant's hazard lights keep flashing?

Chery Ant's hazard lights may keep flashing due to a circuit issue in the vehicle's computer. You can try using a spare key to check if there is an electronic fault. It could also be that the vehicle computer has detected the anti-theft chip. Car hazard lights: Car hazard lights, also known as emergency flashers, are warning lights that cause both turn signals to flash simultaneously. In severe weather conditions, such as heavy rain or fog that significantly reduces visibility, you can turn on the hazard lights and proceed slowly. However, hazard lights should not be used as a substitute for fog lights. The second scenario is when a vehicle breaks down or is involved in an accident on the road. Turning on the hazard lights can alert passing vehicles. Generally, drivers will slow down when they see hazard lights and proceed only after assessing the situation ahead. Solution: If the hazard lights keep flashing and cannot be turned off, it is likely due to a problem with the control unit. You need to check if the hazard light relay is functioning properly. Use a multimeter to test the output line of the hazard light relay to see if there is a 12v output.
20
5
Share

What car is the Nissan star logo?

Japanese Fuji Heavy Industries' Subaru car. Subaru is a star cluster in the Taurus constellation, among which six stars are visible to the naked eye, while approximately 250 other pale blue stars require a telescope to be seen. Notes: In the West, this star cluster is called Pleiades; in China, it is known as the Mao star cluster; in Japan, it is called Subaru (meaning 'to govern' or 'to gather'). In Japan, it also has another name, Mutsuraboshi (meaning 'six stars'), which appears more frequently in certain contexts, such as in ancient Japanese official documents like Kojiki, Manyosyu, and literary works such as Makura-no-soshi. Subaru: Subaru is a division under Fuji Heavy Industries Ltd. (FHI) specializing in automobile manufacturing. Established in 1953, it initially focused on producing cars, as well as manufacturing aircraft and various engines. It is a manufacturer of diverse types and multi-purpose transportation equipment. The logo of Fuji Heavy Industries' Subaru cars features a six-star cluster.
18
0
Share

What is the highest level model of the Mercedes-Benz E-Class?

Mercedes-Benz E-Class AMG is the highest configuration of the Mercedes-Benz E-Class. Exterior: The Mercedes-Benz AMG E53 Coupe perfectly inherits the elegant side of the E-Coupe, which has always given people the impression of being more elegant than performance-oriented. Through adjustments in details and kits, it showcases its performance side. The blackened grille is a distinctive feature. Engine: The Mercedes-Benz E-Class AMG is equipped with a 6-cylinder engine. With the assistance of a 48V mild hybrid system, it delivers a maximum power of 320kW (435Ps) and a maximum torque of 520Nm (1800-5800rpm), achieving a 0-100km/h acceleration time of 4.4s.
18
1
Share

Where is the coolant drain hole located on the Boyue?

The coolant drain hole on the Boyue is located at the lower part of the car's radiator. How to replace the coolant: Before completely replacing the coolant, conduct a thorough inspection first to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose is named for its five connections to various parts, and the coolant flows through it before being distributed to different sections of the car to perform its function. If there are signs of coolant leakage in this part, replace the hose or resecure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue to pour water into the reservoir so that it flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink tint. Continue adding clean water until clear water flows out. Note: Don’t forget to remove the heater hose and drain all the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose—this is the quickest way to get the coolant into the radiator. Then, add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop slightly. Add more coolant until it reaches the "MAXT" mark on the reservoir.
13
0
Share

How much does the Aolong 8x4 truck weigh?

Aolong 8x4 truck has a curb weight of 12.2 tons. Configurations: For the dual-axle dump truck models: 270-horsepower Weichai engine version weighs 12.2 tons; 290-horsepower Weichai engine version weighs 12.32 tons; 300-horsepower Weichai engine version weighs 12.32 tons; 336-horsepower Weichai engine version weighs 12.4 tons. 8x4 Trucks: According to transportation regulations, the overload limit is 30% of standard capacity. A standard 4x2-8x4 truck has a load capacity of 38 tons, allowing up to 49.4 tons with 30% overload. This configuration features two steering axles (four wheels) in front and two drive axles (eight wheels) in rear, commonly seen in dump trucks, heavy-duty trucks, and tractor-trailers. These heavy-duty vehicles are primarily used for construction and transportation purposes due to their high load capacity.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.