Where is the Renault Koleos cabin air filter located?

2 Answers
GrantRose
09/05/25 8:16am
Renault Koleos's cabin air filter is located inside the glove compartment on the passenger side. The cabin air filter serves the following 5 functions: 1. Ensures tight sealing against the housing to prevent unfiltered air from entering the cabin; 2. Filters out solid particles from the air such as dust, pollen, and abrasive particles; 3. Adsorbs moisture, soot, ozone and maintains persistent moisture absorption, while also eliminating odors, carbon oxides, SO2, and CO2; 4. Prevents windshield fogging to maintain clear visibility for safe driving, provides fresh air to the cabin, protects occupants from inhaling harmful gases, ensures driving safety, and effectively sterilizes and deodorizes; 5. Maintains clean cabin air free from bacterial growth, creates a healthy environment, efficiently blocks pollen to prevent allergic reactions that could compromise driving safety.
Was this review help?
7
3
Share
OGia
09/17/25 8:25am
When dealing with the Renault Koleos' cabin air filter, I found it located right behind the glove box. You'll need to remove the glove box first to access it. The specific steps are: open the glove box, apply slight pressure to both sides to release it, then you'll see a small cover - opening that reveals the filter. I've done this several times in my car, and it's quite simple - no tools required, just bare hands will do. Just remember to buy the correct filter model that matches your vehicle. The Koleos typically uses activated carbon filters, which are great for dust prevention and odor removal. In areas with poor air quality, replacing it once can last you half a year. As cars age, accumulated dust can affect AC airflow, so addressing it early can even save you some fuel costs.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What is the reason for the oil light coming on and then turning off when accelerating?

Oil light coming on and then turning off when accelerating may be due to incorrect oil viscosity. Below is an introduction to engine oil knowledge: 1. Introduction: Engine oil, also known as engine lubricant, has a density of approximately 0.91kg×10 cubic. It serves functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing certain new properties, making them an important part of lubricating oil. 2. Requirements: As a type of machinery, engines have common requirements for lubricating oil similar to general machinery, such as appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature performance requirements. However, engines are also a special type of machinery, and their requirements for lubricating oil have unique aspects.
1
2
Share

Why Can Pushing a Car Start the Engine?

Pushing a car can start the engine because the starter gear remains engaged with the flywheel after the engine stalls. When the car is pushed, the thrust force causes them to separate, allowing the engine to start. Conditions under which pushing can start the engine: When the battery is too weak for the starter to crank the engine, pushing the car can help. This works because the car is pushed while in gear, using the chassis to rotate the engine externally and initiate ignition. However, if the issue is not a weak battery or a faulty starter—such as an engine malfunction—pushing the car won't help, and the engine still won't start. Precautions when pushing a car: Generally, you should engage third gear in advance, hold the clutch lever, push the car to a certain speed, and then release the clutch lever to start the engine. Avoid shifting gears after gaining speed, as this can easily cause gear grinding and damage.
10
4
Share

What are the right-of-way rules for motor vehicles when turning?

The right-of-way rules for motor vehicles when turning are as follows: 1. When there are traffic signs or markings, yield to the party with priority passage; 2. In the absence of traffic signs or markings, stop and observe before entering the intersection, yielding to vehicles coming from the right; 3. Turning motor vehicles must yield to vehicles going straight; 4. For vehicles traveling in opposite directions, those turning right must yield to those turning left. U-turn rules at traffic lights: 1. U-turns are prohibited when there is no left-turn lane at the traffic light; 2. U-turns are not allowed on crosswalks at traffic lights—you must pass the crosswalk before making a U-turn; 3. If there are explicit signs prohibiting U-turns or left turns at the traffic light intersection, U-turns are never allowed; 4. U-turns are prohibited if the centerline of the road at the traffic light intersection is a double solid yellow line. If it is a double yellow line with one solid and one dashed line, vehicles on the dashed side can make a U-turn, while those on the solid side cannot; 5. If there is a yellow grid line at the traffic light intersection, U-turns are permitted, but vehicles must not stop on the yellow grid line; 6. If there is a U-turn sign or a U-turn signal, follow the green light indication to make a U-turn; 7. If there is no U-turn light but a left-turn light, wait for the green light in the left-turn lane before making a U-turn.
14
1
Share

How many points are deducted for immediately reversing after driving in the wrong direction?

Immediately reversing after driving in the wrong direction results in a deduction of 3 points on regular roads and 12 points on highways. Within a single scoring cycle, if the accumulated points exceed 12 but are less than 24, the driver only needs to attend traffic regulation training and pass the exam. However, if the accumulated penalty points reach 24 or more within one scoring cycle, the driver must not only attend the training and exam for Subject One but also retake the training and exam for Subject Three. Only after passing all these can the driver regain their license. Below are some common traffic violations: 1. Running a red light: This is one of the most common violations. According to the new traffic regulations, running a red light results in an immediate deduction of 6 points. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will be fined and detained for 15 days. Driving without a license or with a revoked license will result in 15 days of detention and a fine. 3. Overloading or overcrowding: For passenger vehicles exceeding the allowed number of passengers by less than 20% or cargo vehicles exceeding the allowed load by less than 30%, a fine will be imposed. If the excess is 20% or more for passenger vehicles or 30% or more for cargo vehicles, a heavier fine will be imposed. 4. Drunk driving: Driving under the influence of alcohol results in a 3-month suspension of the driver's license and a fine. Driving a commercial vehicle under the influence leads to the same penalties. 5. Speeding: Driving 50% over the speed limit results in a fine and revocation of the driver's license.
9
3
Share

What does it mean for a motorcycle to have been dropped?

Motorcycles, especially heavy-duty ones, are prone to being dropped in place due to lack of experience when making U-turns or low-speed turns. How to determine if a motorcycle has been dropped by examining the bumper: If the motorcycle has been dropped in place, the bumper head may show dents but no or very minor scratches. Note that if a relatively old or high-mileage motorcycle is fitted with a brand-new bumper, it might indicate a previous drop. How to determine if a motorcycle has been dropped by examining the exterior: Check the footpegs, gear lever, brake pedal, handlebars, and mirrors. If the motorcycle was dropped while riding, there will definitely be marks; otherwise, there won't be. However, also pay attention to the issue of old motorcycles with new parts. How to determine if a motorcycle has been dropped by assessing the riding feel: If the motorcycle has been seriously dropped, it may have some impact on the frame.
15
4
Share

Is the Impact Significant if the Chassis Crossbeam Gets Scratched and Bent?

If the chassis crossbeam gets scratched and bent, the impact is not significant. The role of the chassis crossbeam: The crossbeam provides strong body rigidity, which also helps improve safety. This is particularly important for heavy-duty vehicles and off-road vehicles. It enhances the driving rigidity of the undercarriage and the entire vehicle. From a mechanical perspective, it can be understood as a rectangular "frame" welded from thick square steel that supports the vehicle body above. Most of the vehicle's mechanical components are installed on this frame. Introduction to the car chassis: The car chassis consists of four parts: the transmission system, the running gear, the steering system, and the braking system. The function of the car chassis is to support and install the vehicle's engine and its various components, forming the overall shape of the car. It also receives power from the engine, enabling the car to move and ensuring normal operation.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.