Where is the Renault Air Conditioning Filter Located?

1 Answers
Olive
07/29/25 5:39pm
Renault's air conditioning filter is located inside the glove compartment on the passenger side. Below is some information about the air conditioning filter: 1. Function: It provides fresh air to the cabin, maintaining cleanliness and hygiene. High-quality filters can capture dust particles, reduce respiratory discomfort and irritation for allergy sufferers, and enhance driving comfort. 2. Types: There are two types—non-activated carbon and activated carbon filters. 3. Replacement Interval: Generally, it should be replaced every 12,000 kilometers, but this can be adjusted based on actual driving conditions and air quality.
Was this review help?
2
3
Share
More Forum Discussions

How to Solve the Sunroof Noise Issue in Golf 4?

The sunroof noise in Golf on bumpy roads is caused by vibrations between the sunroof and the sliding rails. It is recommended to avoid fully opening the sunroof on extremely bumpy roads, as excessive vibration between the sunroof and rails may lead to deformation of related components or even damage the motor. Additionally, opening the sunroof during rain or car washing is strictly prohibited. The correct methods for using the Golf sunroof are as follows: 1. When opening the sunroof, ensure there are no obstacles on the roof that could hinder its upward or backward movement, as overloading may burn out the motor or accidentally scratch the sunroof glass surface. 2. Always operate the sunroof correctly when opening or closing it. Improper operation may cause excessive current inside the sunroof motor, leading to motor burnout. 3. Avoid opening the sunroof when driving on extremely bumpy roads, as this may cause excessive vibration between the sunroof and rails, potentially deforming related components and damaging the sunroof during operation. 4. Do not direct high-pressure water jets at the sunroof seals during car washing, as this may deform the seals and cause leaks. 5. Do not open the sunroof immediately on frosty winter mornings, after snowfall, or after car washing, as the sunroof may be frozen, potentially damaging the motor or seals. Instead, turn on the car heater first and wait for some time before opening the sunroof.
19
4
Share

What to Pay Attention to for Vehicles in High Temperatures?

Here are the precautions for vehicles in high temperatures: 1. Engine coolant temperature is too high, antifreeze should be added: High engine coolant temperature is mostly caused by a lack of antifreeze. Park the vehicle in a shaded area to cool down, but do not turn off the engine. Let the engine continue to idle, open the hood to dissipate heat, and add antifreeze to the radiator once the temperature drops. Never pour cold water onto the engine, as this may cause the engine block to crack, leading to irreparable damage. 2. Avoid running the air conditioning for extended periods: When the engine is idling, gasoline combustion is incomplete, producing carbon monoxide. Generally, vehicles equipped with air conditioning have better sealing performance. Most people will experience dizziness, fatigue, and reduced memory after staying in such an environment for several hours. At the same time, passengers exhale large amounts of carbon dioxide, drastically reducing the oxygen level inside the vehicle. Therefore, adjust the air conditioning operation appropriately or open the windows periodically to let in fresh air. 3. Prevent vehicle self-ignition in high temperatures: Vehicle self-ignition is mainly caused by electrical leaks or fuel leaks. Improper vehicle maintenance, aging components, and damaged wiring can easily lead to electrical leaks. Additionally, prolonged corrosion of the fuel tank can cause fuel leaks. Therefore, preventing self-ignition in high temperatures starts with proper vehicle maintenance.
18
5
Share

What Does the Exclamation Mark on a Mercedes Dashboard Mean?

An exclamation mark appearing on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many dashboard indicator lights with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, and engine oil pressure sensor faults. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Wiper Fault: A yellow sector with an exclamation mark inside. This is the wiper fault indicator, indicating insufficient windshield washer fluid, a damaged washer fluid sensor, or a damaged wiper motor. The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its main function is to clear rain, snow, and dust that obstruct visibility on the windshield. The wiper should be replaced if: it has been used for a long time and the rubber blade is aging; cracks appear on the rubber blade; there is a screeching sound when wiping the glass; marks are left on the wiped area; or the wiper shakes or jumps during use. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. If the steering system warning light remains on, it indicates a problem with the power steering system. If the yellow indicator light is on, the steering system is partially malfunctioning, requiring greater force to turn the steering wheel. If the red indicator light is on, the steering system has completely failed. Note that when the car is started, all lights will illuminate for an automatic system check and will turn off after the check is completed. If a light does not turn on when the ignition is switched on, remains on, or lights up while driving, it indicates a fault in the corresponding system. In such cases, seek professional assistance promptly to inspect the car and eliminate safety hazards.
20
2
Share

What are the driving steps for a Ferrari?

Ferrari driving steps: 1. Insert the key and turn it all the way up, then press the brake, and press the red round start button on the steering wheel. 2. Ferrari uses paddle shifters for gear changes, with the left paddle for downshifting and the right paddle for upshifting. Below is some related information about Ferrari: 1. There are only three gear buttons on a Ferrari, namely LAUNCH for launch control, R for reverse, and AUTO for automatic mode. 2. After pressing the AUTO button, the car will not move forward automatically; you still need to pull the right upshift paddle, and then the Ferrari will move forward.
3
3
Share

Where is the VIN on the Highlander?

The VIN (Vehicle Identification Number) of the Highlander is located at the lower left corner of the windshield on the driver's side. Below is some related information about the VIN: 1. The VIN is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. 2. The VIN serves as a unique identifier for the vehicle, much like a fingerprint. It helps track issues, ownership changes, and also aids in theft prevention. 3. To avoid confusion with the numbers 1, 0, and 9, the letters 'I', 'O', and 'Q' are not used in the VIN. Additionally, the 10th character (representing the model year) does not use 'I', 'O', 'Q', 'Z', 'U', or '0'. 4. This identifier is typically found on a sticker or plate inside the driver's side door or on the door frame. Sometimes, the VIN may also be printed inside the glove compartment. It is also commonly listed on the vehicle's title and insurance documents.
10
5
Share

Can a Dash Cam Record Audio?

If the audio recording function is enabled, it can capture sound. Dash cams are typically equipped with external cameras, primarily designed to record the driving conditions outside the vehicle. However, they can also record audio inside the car, though they cannot capture images of the interior. The functions of a dash cam are as follows: 1. Recording various state information of vehicle operation and driver actions: This includes data such as mileage, speed, and, for models with GPS modules, the vehicle's location and travel route. Analyzing and processing the collected vehicle and driver operation information can help optimize vehicle performance and correct poor driving habits. 2. Alarm function: According to national standards, continuous driving should not exceed 4 hours, and driving time within 24 hours should not exceed 8 hours; otherwise, it will be considered fatigue driving. When a driver engages in fatigue driving without stopping to rest, the dash cam will automatically emit continuous alarm sounds, and background monitoring departments can also contact the driver for a break. The fatigue alarm helps drivers maintain a good driving state, thereby reducing the occurrence of traffic accidents. Additionally, depending on the features of the dash cam, it may also include overspeed alerts, anti-theft reminders, and vehicle fault alerts. 3. Assisting in determining liability in traffic accidents: The dash cam records the vehicle's driving status (speed, braking information, turn signals, doors, mileage, location, direction, etc.). By extracting the stored data from the dash cam, it can assist in scientifically determining liability in traffic accidents, making the process more objective.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.