Where is the rearview mirror heating switch located on the Roewe?

1 Answers
VanGabriella
07/29/25 8:15pm
Roewe's rearview mirror heating button is located on the control panel, designed as a square frame containing three upward-curving arrows. Pressing this button activates the rearview mirror heating function. Rearview mirror heating switch (knob type): On the driver's side door, there is a knob at the front left with several symbols: L, 0, R, and a heating symbol. The heating symbol represents the rearview mirror heating switch, also depicted as a square frame with three upward-curving arrows. Turning the knob to this symbol activates the rearview mirror heating function. Principle of rearview mirror heating: Both side mirrors contain heating elements (electric heating films). During rainy or snowy weather, when the driver activates the heating function, these elements quickly warm up to a set temperature (typically between 35-60°C) within minutes, effectively defogging and deicing the mirrors. Note: The rearview mirror heating icon (square frame with three upward-curving arrows) should not be confused with the front windshield defroster button (sector shape with three upward-curving arrows).
Was this review help?
11
2
Share
More Forum Discussions

What is the D3 mode in Civic?

The so-called D3 in Civic refers to a gear position that limits the transmission to the 3rd gear and prevents it from shifting up further. It is generally used in traffic jam conditions to avoid frequent gear shifting. Automatic transmission cars have gear positions such as R, P, D, N, L, and S. The specific usage methods are as follows: 1. R gear: Used when reversing, also called reverse gear. It should be noted that the car must come to a complete stop before shifting to R gear. 2. P gear: Used when parking, meaning the engine stops working. Therefore, many people call this gear the parking gear. 3. D gear: Mainly used for driving the car forward, called the drive gear, which is the basic gear position for automatic transmission cars. 4. N gear: Similar to the neutral gear in manual transmissions, with no difference in principle. It can be used when encountering a red light ahead while driving. 5. L gear: A low gear position, typically used when going uphill or overtaking. 6. S gear: Sport mode, allowing free switching among all gear positions.
1
0
Share

What does a non-compliant vehicle mean?

"Non-compliant vehicle" refers to a motor-driven vehicle that operates on roads but does not meet the national standards for non-motor vehicle products in terms of maximum design speed, unladen mass, and external dimensions, and is not listed in the national motor vehicle product catalog. Relevant regulations: Maximum speed exceeding 20 km/h but not exceeding 50 km/h; unladen mass exceeding 40 kg; lacking proper pedal drive function; external dimensions exceeding technical parameter standards; using an internal combustion engine with displacement exceeding 30 ml but not exceeding 50 ml, yet not listed in the national motor vehicle product catalog; or other non-motor vehicles that do not comply with laws and regulations. Automotive standards: Automotive standards serve as the legislative basis for government automotive regulations, with many important standards effectively becoming formal automotive laws in various countries. Automotive standards can generally be categorized into three levels: national, industry, and enterprise. National standards apply nationwide; industry standards are used within the automotive industry; and enterprise standards are formulated and implemented by individual manufacturers.
12
3
Share

What are the differences between the Roewe i6 Plus and the Velite 6?

The differences between the Roewe i6 Plus and the Velite 6 are as follows: 1. Engine: The Roewe i6 Plus is equipped with a 1.6T L4 engine, while the Velite 6 features a pure electric motor with 150 horsepower. 2. Body type: The Roewe i6 Plus is a 4-door, 5-seater sedan, whereas the Velite 6 is a 5-door, 5-seater hatchback. The Roewe i6 Plus adopts a brand-new front face design with a larger grille that integrates with the headlights. Based on the Rhythm design concept, it comes standard with the Rhythm Pro Wing Grille and a flat, wide-mouth design. It also features a 66% high-strength steel cage body and a laser-welded integrated roof. On the other hand, the Velite 6 has a winged front grille that connects the left and right headlight clusters, extending across the front face to create a visually elongated effect. Its rear features a dynamic and stylish floating roof design, with blackened LED taillight clusters that include L-shaped light strips. The model designation on the rear of the Velite 6 clearly indicates its identity.
18
5
Share

What is the ground clearance of the Haval H7?

Haval H7's ground clearance is 25cm. The Haval H7 adopts a unibody structure with a curb weight exceeding 2 tons, powered by a 2.0T engine (coded 4C20) paired with a 6AT transmission. The front suspension features a double-wishbone design, while the rear suspension is a multi-link setup. Below are more details about the Haval H7's chassis: 1. The front suspension utilizes a double-wishbone configuration. Structurally speaking, this suspension type offers greater load-bearing capacity and provides better lateral support during vehicle steering. All suspension components are made of steel. 2. The Haval H7's rear suspension is a multi-link design. This structure was chosen considering both the vehicle's positioning and the spatial arrangement requirements for the four-wheel-drive system. 3. The Haval H7's chassis features an H-shaped lower control arm, with all suspension components constructed from steel. 4. The Haval H7 employs sensors installed on the vehicle to collect engine speed signals, wheel speed signals, and other data. Through analysis and calculation, it actively adjusts and rationally distributes torque to improve driving conditions, significantly reducing response time compared to hydraulic couplers.
1
3
Share

Is 12L Fuel Consumption Considered High?

For family sedans, a fuel consumption of 12L is relatively high. The factors contributing to high fuel consumption are as follows: Tire pressure below the standard level increases fuel consumption by raising the rolling resistance of the tires. This enlarges the contact area of the tires, increasing friction, which not only wears down the tire shoulders but also boosts fuel consumption. A full fuel tank increases the vehicle's weight, leading to higher fuel consumption. A malfunctioning thermostat or temperature control switch lowers the water temperature, increasing fuel consumption. Spark plugs that have been used for too long reduce ignition energy, slowing down acceleration and significantly increasing gasoline consumption. Prolonged idling without turning off the engine or frequent starts also increase fuel consumption. Rapid acceleration causes strong friction between the tires and the ground, accelerating tire wear. It also easily leads to engine carbon buildup, which can increase fuel consumption. If a vehicle hasn't been maintained for a long time, dirty engine oil and air filters can also lead to increased fuel consumption. Dirty oil results in poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thereby raising fuel consumption.
7
2
Share

What are the differences in appearance between the BMW X3 and X5?

BMW X3 and X5 have the most obvious difference in appearance: the X5 is significantly larger than the X3. The X3 is a compact SUV, while the X5 is a full-size SUV. Additional details are as follows: 1. Driving Feel: The X3 is closer to a sedan, offering very agile handling; the X5, on the other hand, is more aggressive. In terms of weight, the X5 is around two tons with a tall and large body, while the X3 weighs approximately 1.5 tons and is more slender. 2. BMW X3: It combines the distinctive proportions of a sports utility vehicle with classic and innovative design, featuring a fresh and youthful exterior while emphasizing the design characteristics of the BMW brand—robust and powerful. Additionally, the BMW X3's interior can accommodate five people, along with plenty of luggage or sports equipment, providing more convenience for the owner's travels. 3. BMW X5: It achieves an unprecedented level in terms of technical equipment and performance for a four-wheel-drive vehicle. It offers excellent handling sensitivity and stability, incorporating a series of innovative technologies, including four-wheel braking, ASC+T (Automatic Stability and Traction Control), and DSCⅢ (Dynamic Stability Control). Whether on highways or rugged trails, it delivers powerful performance and outstanding capabilities. Even on soft surfaces, it accelerates and brakes with flexibility and ease.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.