Where is the rearview mirror heating switch located on the Baojun RM5?

1 Answers
Sam
07/30/25 9:55am
The rearview mirror heating button on the Baojun RM5 is a push-button type switch located on the control panel. It features a square frame with three upward-curving arrows inside. Pressing this button activates the rearview mirror heating function. Principle of rearview mirror heating: Both side mirrors contain electric heating elements (heating films). During rainy or snowy weather, when the driver activates the rearview mirror heating function, these heating elements quickly warm up to a set temperature (typically between 35-60°C) within minutes, effectively defogging and defrosting the mirrors. The rearview mirror heating button icon should be distinguished from the front windshield defogger button: A fan-shaped symbol with three upward-curving arrows indicates the front windshield defroster, while a square frame with three upward-curving arrows represents the rearview mirror heater.
Was this review help?
1
1
Share
More Forum Discussions

What is the fuel tank capacity of Wuling Hongguang?

The fuel tank capacity of Wuling Hongguang is 50 liters, which is the officially announced data. Owners who have purchased Wuling Hongguang can also check this information on the vehicle's configuration sheet. The fuel grade for Wuling Hongguang is 92, with a fuel consumption of 6.5 to 6.7L per 100 kilometers. A full tank of fuel can cover a distance of 746 to 769 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. It is recommended to refuel when there are only 2 segments left to avoid running out of fuel halfway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to ensure that the fuel inside the tank can expand when the temperature rises without overflowing the tank's safety space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated fuel tank capacity.
9
4
Share

Why Did the Car Window Suddenly Stop Working?

Window malfunction occurs when the vehicle's body control module loses the data from the remote key that controls the windows. Below are the specific details about the vehicle's one-touch window function: 1. Usage Method: To use, press and hold the switch, then release the button when the window reaches the desired position to stop the movement. Cars equipped with one-touch windows have a two-stage window control switch. The first stage operates similarly to a regular power window. The second stage, when pressed and released, automatically fully opens or closes the window. 2. Function Purpose: Generally, mid-to-high-end models are equipped with the one-touch window function, primarily for the convenience of drivers and passengers, and to prevent drivers from being distracted by operating the windows, thereby enhancing safety. 3. Anti-pinch Function: One-touch windows usually come with an anti-pinch feature to avoid the danger of pinching fingers. Only the driver's side has the one-touch function, which is designed with safety considerations in mind.
6
3
Share

What is the actual fuel consumption measurement of the Geely Xingyue L?

The comprehensive fuel consumption of the Geely Xingyue L is 6.8-7.8L/100km. Currently, there are 7 models of the Geely Xingyue L available for sale: the two-wheel-drive luxury model, two-wheel-drive flagship model, two-wheel-drive premium model, two-wheel-drive comfort model, and two-wheel-drive intelligent premium model, all with a comprehensive fuel consumption of 6.8L/100km. The high-power automatic four-wheel-drive flagship model and high-power automatic four-wheel-drive premium model have a comprehensive fuel consumption of 7.8L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 9.49-10.83L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, press the accelerator gently to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and adopting slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Timely oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even engine misfires); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body at the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, and greater wind resistance means the car faces more resistance, requiring more power and thus increasing fuel consumption.
9
1
Share

What does fault code 01130 indicate for FAW-Volkswagen vehicles?

FAW-Volkswagen fault code 01130 indicates that this code appears when the ABS is subjected to high-frequency electromagnetic interference or when the microprocessor deems the input speed signal unreliable. The following are possible causes: 1. Excessive fuel consumption: Common causes include clogged filters leading to restricted air intake, excessively high or low coolant temperatures, incorrect ignition timing, valve timing or idle speed adjustment, wear and failure of engine and major components, low cylinder pressure, leaks in fuel and air pipelines and connections, faults in sensors, connectors and wiring of the electronic control system, or faults in the ECU and its connectors. 2. Excessive lubricant consumption: Mainly caused by excessive wear of the engine's crank-connecting rod mechanism and valve train components, or oil burning/leakage due to failed oil seals.
18
3
Share

Why can the door still be opened when the Volkswagen car has automatic locking?

The reason why the door can still be opened when the Volkswagen car has automatic locking is: In case of an accident where the occupants inside the vehicle become unconscious and unable to open the door from inside for rescue, external rescuers can open the door in the shortest time to promptly rescue the occupants. Below is an introduction to the automatic locking function: 1. Purpose: The purpose of the automatic locking function is theft prevention. The car will lock only after reaching a certain speed (around 15km/h) while driving, preventing door pull robberies during traffic jams or at red lights, providing a certain level of security. 2. Advantages: It offers protection for passengers with children inside the car, preventing young children from opening the door handle while the car is in motion.
18
3
Share

What does the car mode button mean?

Car mode button means switching driving modes. The following is a detailed introduction to car driving modes: 1. Eco mode: A more economical and fuel-efficient driving method, suitable for daily commuting. In this mode, the fuel injection volume and transmission control module are controlled by the computer, which will adjust the most fuel-efficient driving method for the car. This mode has the lowest fuel consumption but also the least power. At the same time, in this mode, since the transmission control module is controlled by the computer, the throttle pedal response will not be so sensitive, and the engine response will not be very fast. 2. Normal mode: Using the control in normal mode, the car's throttle response is more balanced, and the handling feels simpler and more comfortable. 3. Sport mode: By increasing engine speed or quickly downshifting, the vehicle can instantly burst out with greater power.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.