Where is the rearview mirror heating switch for the Mercedes-Benz E300L?

2 Answers
VanCameron
07/25/25 3:48am
The rearview mirror heating switch for the Mercedes-Benz E300L is located in the central control button area, combined with the rear windshield defogging function at the same switch. Pressing the corresponding switch will simultaneously heat both the rear windshield and the rearview mirrors. The rearview mirror heating function can evaporate water, snow, and frost from the mirror surface during rainy, snowy, or foggy weather, ensuring a clean and clear view. Taking the Mercedes-Benz E-Class 2021 E300L Fashion model as an example, its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. It is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission.
Was this review help?
3
0
Share
Jacob
08/10/25 5:09pm
I remember struggling to find the rearview mirror heating switch when driving the Mercedes-Benz E300L. At first, I searched all over the car, only to discover it was on the air conditioning control panel—the button with the rear window heating icon, which looks like a small square with wavy lines. Pressing it activates the automatic heating function for the mirrors, a clever design that saves space and is highly practical. On rainy days, I make it a habit to press it as soon as I get in the car, and within seconds, the mirrors clear up, significantly improving driving safety. When parking or washing the car, I usually wipe off any dust on the panel to ensure the icon remains clearly visible. If the button stops working, it might be due to a blown fuse or an electrical issue, so it's best to check it promptly to avoid problems in bad weather. This integrated feature makes operation smoother, though beginners might overlook it. Once you get used to it, it becomes incredibly convenient.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How to Remove the ETC from the Car Windshield?

The methods to remove the ETC from the car windshield are: 1. Use a hairdryer to blow hot air at the joint between the OBU device and the windshield. The adhesive tape behind the device will soften when heated, reducing its stickiness. The owner can then slowly twist and remove the OBU device by hand or use a plastic scraper to gently pry it off; 2. Soak a towel in hot water and place it on the outside of the windshield. This will also heat the adhesive tape behind the OBU device. Once the tape softens, the device can be removed; 3. Use sunlight to heat the adhesive tape behind the OBU device. The owner can park the car in an open area on a hot, sunny day, allowing the device to be exposed to intense sunlight and soften, after which it can be removed.
4
3
Share

What cars have a horse as their logo?

Cars with a horse logo include Ferrari, Ford Mustang, Porsche, Baojun, Carlsson, and Kamaz. Taking the Ford Mustang as an example, it is equipped with a 2.3-liter four-cylinder turbocharged engine and a 5.0-liter V8 naturally aspirated engine. The 2.3-liter four-cylinder turbocharged engine delivers 299 horsepower and a maximum torque of 434 Nm, while the 5.0-liter V8 naturally aspirated engine produces 466 horsepower and a maximum torque of 556 Nm. The Mustang's body dimensions are 4794 mm in length, 1916 mm in width, and 1373 mm in height, with a wheelbase of 2720 mm. The Mustang features rear-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
17
0
Share

What does it mean when the OnStar in-car WiFi data is used up?

OnStar in-car WiFi data being used up means the service period has expired. Below is an introduction to in-car Bluetooth related content: 1. Programming: Some mobile phone music playback programs are incompatible with certain vehicle models' pairing codes, so only calls can be answered but music cannot be played, requiring changes to the Bluetooth playback frequency band. 2. Multimedia music: If the in-car Bluetooth's multimedia music is not activated, it needs to be enabled in settings. 3. Media audio: If the phone's media audio is not turned off, it may cause signal interference with Bluetooth functionality. Below is extended information about the OnStar system: 1. Functions: Automatic collision assistance, full voice-controlled hands-free calling. 2. Systems: Emergency assistance system, security system, navigation system, vehicle condition monitoring system.
19
0
Share

How to Replace the Battery in a Mercedes-Benz Car Key?

Mercedes-Benz car key battery replacement method is: 1. Turn the remote key upwards and use a flat small screwdriver to slowly pry into the middle of the gap; 2. The key will separate by about a 2mm gap; 3. Gently separate the key along the middle gap, remove the old battery, and replace it with a new one. Taking the Mercedes-Benz GLC as an example: The Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz, with dimensions of 4764mm in length, 1898mm in width, and 1642mm in height, and a wheelbase of 2973mm. In terms of configuration, the off-road animation of the Mercedes-Benz GLC is particularly attractive: parameters such as gradient, steering angle, direction of travel, roll angle, as well as throttle and brake levels are all displayed dynamically in real-time on the central display, making the center console appear clean and tidy.
13
5
Share

Why is there no airflow from the heater?

The reasons for no airflow from the heater are: 1. When the air conditioner is heating in winter, it requires a preheating stage after startup. The outdoor unit works first, and the indoor unit starts blowing air only after the temperature of the indoor pipes rises. This is the air conditioner's cold air prevention function; 2. After running for a while, the outdoor unit needs to defrost, during which the indoor unit also stops working. Defrosting usually takes about 10 minutes. The correct way to use the heater is: First start the engine for preheating. When the engine temperature gauge pointer reaches the middle position, turn on the heater and set the air circulation to external circulation to expel the cold air from the car. After 2 to 3 minutes, set the air circulation to internal circulation. Notes: Do not aim the air vents directly at people, as this can more easily cause skin dryness; Secondly, it is recommended to half-open the window to allow some air circulation; A car humidifier can be used inside the vehicle.
17
5
Share

How to unlock the locked steering wheel of a Volkswagen Santana?

To unlock the locked steering wheel of a Volkswagen Santana, follow these steps: Hold the steering wheel with your left hand and turn the key with your right hand simultaneously. While doing this, gently shake the steering wheel left and right (the movement is minimal but allows rotation) with your left hand. As you turn the key with your right hand, at a certain point, the lock cylinder will release, thus unlocking the steering wheel. The steering wheel's auto-lock feature is a simple anti-theft device. The reason it gets stuck is that the internal lock cylinder is jammed in a specific position, requiring the key to be turned to disengage it and unlock the steering wheel. The Santana is a model produced by the German automaker Volkswagen. Its body dimensions are 4437mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. In terms of exterior design, the Santana features a clean and straightforward look without exaggerated lines. The waistline running from the front to the rear gives the car a dynamic and tension-filled appearance.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.