Where is the rearview mirror heating switch for the 2020 RAV4 Feng Shang?

1 Answers
MacRemington
07/30/25 12:50am
The rearview mirror heating switch button for the 2020 RAV4 Feng Shang is located on the air conditioning control panel and shares the same button as the rear window defroster. The button features a rectangle with three upward-curving arrows at the bottom. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog without the need for frequent manual wiping, thereby reducing driving hazards. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. The heat is distributed across the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually dissipates, effectively clearing frost and condensation. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The rearview mirror heating function works by incorporating electric heating wires, which consume a significant amount of power. Ensure the vehicle is running when using this feature to avoid draining the car battery, which could prevent the engine from starting. Avoid activating the rearview mirror heating while the car is stationary. Additional methods for defogging rearview mirrors include: Opening windows slightly to allow air circulation between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
Was this review help?
7
1
Share
More Forum Discussions

Do Cars with Larger Displacement Consume More Fuel?

Vehicles with larger displacement do not necessarily consume more fuel; it depends on the engine's manufacturing technology. Comparison conditions: Under the same conditions such as vehicle weight, aerodynamic design, mechanical efficiency, engine technology, driving habits, road conditions, etc., cars with larger displacement will consume more fuel. Displacement aspect: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy per unit time (converting the chemical energy of fuel into mechanical energy).
8
0
Share

How often is the annual inspection required for a small car driver's license?

Small car driver's licenses are inspected every six years. Legal basis: Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses"; If the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the motor vehicle driver's license, a motor vehicle driver's license with a ten-year validity period shall be reissued; if the motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period of the motor vehicle driver's license, a motor vehicle driver's license with long-term validity shall be reissued. Notes on driver's license annual inspection: No annual inspection is required during the six-year validity period of the driver's license. The driver should apply for a replacement at the traffic police branch under their jurisdiction within 90 days before the expiration of the validity period; drivers holding A, B, N, and P licenses, although no longer required to undergo annual inspections during the validity period, should go to the vehicle management section of the traffic police branch under their jurisdiction within 15 days of the original annual inspection deadline to obtain the "Motor Vehicle Driver's License Application Form", fill it out as required, attach a photo, undergo a physical examination at the hospital, and then submit the application form back to the vehicle management section for computer confirmation.
5
2
Share

What does the triangle exclamation mark mean on a car?

A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark inside indicates an automatic transmission fault warning light, signaling a transmission issue or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
3
2
Share

When the guide sign and the road markings are inconsistent, which one should be followed?

When the guide sign and the road markings are inconsistent, follow the direction indicated by the road. Indication markings: Markings that indicate lanes, driving directions, road edges, sidewalks, and other facilities. Prohibition markings: Markings that announce special regulations for road traffic compliance, prohibitions, restrictions, etc., which must be strictly followed by vehicle drivers and pedestrians. Warning markings: Markings that prompt vehicle drivers and pedestrians to be aware of special road conditions, stay alert, and prepare for preventive or responsive measures. Do not cross solid white lines or channelizing lines: When approaching intersections, on-ramps, off-ramps, highway entrances, and other areas, there are solid channelizing lines that should not be crossed, as many of these areas are under strict surveillance.
8
4
Share

What is the tax rate for motorcycles?

The vehicle purchase tax rate for buying a motorcycle is 10%. The payable amount of vehicle purchase tax is calculated by multiplying the taxable vehicle's assessed price by the tax rate. The supplementary table of consumption tax items and rates stipulates: For cylinder capacity (displacement) below 250 ml (including 250 ml), the rate is 3%; for cylinder capacity above 250 ml, the rate is 10%. According to regulations: The consumption tax for small-displacement motorcycles with cylinder capacity below 250 ml (excluding 250 ml) has been abolished. Motorcycles with cylinder capacity of 250 ml and above (excluding 250 ml) continue to be subject to consumption tax at rates of 3% and 10% respectively.
7
5
Share

How Often Should Castrol Full Synthetic Engine Oil Be Changed?

Castrol full synthetic engine oil should be changed every 10,000 kilometers or once a year. Advantages of full synthetic oil: Compared to mineral oil and semi-synthetic oil, full synthetic oil has the following advantages: stable physicochemical properties, better lubricity, high-temperature oxidation resistance, and a longer oil change interval. It also has good low-temperature fluidity, making it easier to start the car in cold weather, and provides excellent engine cooling performance at high temperatures. Precautions for adding engine oil: When adding engine oil, avoid adding too much or too little. If there is too much oil, it will increase the resistance of moving parts. Excessive oil can also easily enter the combustion chamber and participate in combustion, leading to slow and incomplete combustion, resulting in unstable engine idle and easy stalling, as well as sluggish acceleration response.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.