Where is the rearview mirror heating for the 2014 525 model?

2 Answers
DelJace
09/07/25 5:37am
To activate the rearview mirror heating for the 2014 525 model, simply turn on the automatic rain sensor switch. Below are the relevant details: 1. Body dimensions: The exterior length, width, and height of the 2014 525 series are 5047*1860*1491 (millimeters), with a wheelbase of 2888 millimeters. The new 5 Series is 66 millimeters longer than the previous generation. 2. Powertrain configuration: The BMW 5 Series' powertrain has been further enhanced. The top-of-the-line 545i version is equipped with a V8 engine from the 7 Series, delivering a maximum power of 245 kW/333 hp (6100 rpm) and a maximum torque of 450 Newton meters (3600 rpm), with a top speed of 250 km/h and a 0-100 km/h acceleration time of just 5.9 seconds.
Was this review help?
3
4
Share
VanAngelina
09/19/25 4:52am
I remember the rearview mirror heating function on the 2014 BMW 525 was quite cleverly integrated on the vehicle console—right at the rear window defogger button, marked with a square icon containing wavy lines, usually located slightly to the right of the center on the AC panel. Having driven this car for many years, I frequently used it during rain or snow. With just one press, not only would the rear window defog, but the mirrors would also heat up automatically. BMW's design is very intelligent; the system defaults to activating when temperatures drop below 18°C to ensure clear visibility and prevent distractions. If the button malfunctions, it might not be a defect but a fuse issue—I recommend regularly checking the dashboard for any warning lights. Safety comes first; never overlook this feature, especially during nighttime driving, as it effectively reduces accident risks.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What is the speed limit for highway exit ramps?

Ramp speed is generally required to be below 40km/h, which is a safe driving speed determined based on the turning radius of the ramp. Below is more relevant information: 1. Precautions for driving on highway ramps: Pay attention to road signs along the way. On highways, be sure to notice the road signs set up in advance before the ramp entrance. Avoid "waiting until the last minute" and stopping to check only when you reach the ramp entrance; if you miss it, keep going forward. If you are too close or have already passed the ramp entrance, do not brake suddenly or reverse, as vehicles behind you traveling at high speed may not have enough time to avoid a collision, leading to a rear-end accident. 2. Things to note when entering a ramp: On the ramp, accelerate quickly but do not exceed the speed limit indicated by the signs. Overtaking, U-turns, stopping, and reversing are prohibited on ramps. After entering the highway acceleration lane from the ramp, you may or may not turn on the left turn signal, but quickly increase your speed to above 60 km/h, carefully observe the traffic conditions in the lane, and choose the right moment to merge into the main traffic lane.
1
5
Share

What to Do When the Engine Coolant Light Comes On?

Immediately turn off the engine and stop to inspect the issue. Do not continue driving until the problem is resolved. If the engine coolant light comes on, take the following measures: 1. Determine the engine load: Check if it is excessive. 2. Pull over to the side of the road: After stopping, open the engine hood for inspection. 3. Check the coolant level: Ensure the coolant is sufficient. 4. Inspect for coolant leaks: Refill the coolant if necessary. For vehicles, if the temperature of the radiator coolant exceeds the normal range and continues to drive, it will cause increased engine wear and, in severe cases, lead to issues like cylinder scuffing. When the vehicle's water temperature is too high, do not turn off the engine abruptly. For most car models, the cooling system's water pump is driven by the engine. Once the engine is turned off, the pump will also stop, preventing the coolant from circulating. At this time, the engine components remain at high temperatures, and if not effectively cooled, it may cause severe engine damage.
20
0
Share

What are the differences between Audi A3 and Q3?

Audi Q3 and Audi A3 have multiple models, with differences in price, model type, configuration, and power output. Here are some differences between Audi A3 and Q3: Price: The official price of the top-end Audi Q3 is higher than that of the top-end Audi A3. 2. Overall body: The body of the top-end Audi Q3 is longer than that of the top-end Audi A3, and the wheelbase of the top-end Audi Q3 is also longer than that of the top-end Audi A3. 3. Overall configuration: The top-end Audi Q3 is more richly equipped than the top-end Audi A3. 4. Power output: The top-end Audi Q3 is more powerful than the top-end Audi A3.
5
3
Share

Where is the cabin air filter located in the Malibu?

The cabin air filter in the Malibu is located behind the glove compartment on the passenger side. Before removal, the glove compartment needs to be taken out, after which the exact position of the cabin air filter can be seen. The cabin air filter tends to accumulate a lot of dust, which can be blown away using compressed air or similar methods. It is important not to wash it with water, as this may render it unusable. In terms of exterior design, the Malibu integrates the headlights with the grille, featuring a single-unit structure for high and low beams with xenon light sources. Under the hood, the Malibu is powered by a 1.5T engine delivering a maximum power of 125 kW and a peak torque of 250 Nm, paired with a 6-speed automatic transmission.
15
1
Share

What Causes a Failed Emissions Test?

Here are the specific reasons for failing an emissions test: 1. Burning Oil: Worn oil rings fail to scrape off oil properly, allowing oil to flow into the combustion chamber, where it burns along with fuel. Alternatively, aging rubber seals on intake valves can cause oil to leak into the combustion chamber, resulting in oil burning. 2. Spark Plugs and Fuel Quality: Carbon buildup on spark plugs, dirty fuel injectors, improper air-fuel mixture ratios, or poor-quality fuel. 3. Electrical System Malfunction, High Carbon-Oxygen Content: Check for excessive resistance in high-voltage wires, overly large spark plug gaps, assess atomization and sealing conditions, and inspect whether the catalytic converter or oxygen sensor is malfunctioning, leading to non-compliant emission levels.
13
5
Share

Is It Normal for a Car Chassis to Rust?

It is normal for a car chassis to rust, and the specific reasons are: 1. The chassis is exposed to the air and driven on the road, suffering from mud and water erosion, making rust inevitable; 2. The original car lacks proper protection, especially in low-end vehicles, where surface treatment is often done perfunctorily, leading to faster rusting. However, rust on the chassis is not a major issue because those areas are thick and sturdy, generally not causing any significant impact. Typically, if the car does not have undercoating, cleaning it once a week is sufficient to keep it in good condition for several years. Conversely, if undercoating is applied but the surface treatment is not done carefully, it may trap moisture, making rust more likely.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.