Where is the rearview mirror heating button on the MG5?

2 Answers
LaneRose
07/24/25 4:13am
The rearview mirror heating switch on the MG5 is located on the air conditioning control panel, marked by a rectangular button with a wavy line. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thus reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as there is a control button on the driver's side. Principle of the rearview mirror heating function: After rotating the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees. The heat is then distributed to both left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively clearing the mirror of frost and mist. However, if the rainfall is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for air convection: Slightly open both side windows to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help by blowing warm air to defog the mirrors.
Was this review help?
12
1
Share
VonIker
08/10/25 11:49pm
I've been driving the MG5 for a while now, and the rearview mirror heating button is located on the center console's air conditioning panel, integrated with the AC buttons. Look for a small button with an icon depicting fogged mirrors or a wavy pattern—press it, and when the light turns on, it means the feature is activated. This setup is quite convenient, especially during rainy or snowy weather, as it quickly defogs and defrosts the mirrors for clearer visibility. I remember when I first started driving, I often overlooked this feature and had to get out and wipe the mirrors with a cloth in winter. Now, it saves me the hassle. Just remember to wait a minute or two after starting the car before pressing the button for better results. If it doesn’t respond, it might be due to a blown fuse or wiring issue—just get it checked promptly. Safety comes first when driving in the rain, and though this feature seems minor, it makes a big difference in peace of mind. Regularly cleaning dust around the button during maintenance can help prolong its lifespan.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What Type of Car is Volkswagen?

Volkswagen is a German car brand, which includes Shanghai Volkswagen and FAW-Volkswagen. Here is more information about Volkswagen: 1. Volkswagen is a car manufacturer headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four major car manufacturers. 2. The Volkswagen brand group mainly includes the Audi brand group and the Volkswagen brand group. The Audi brand group mainly includes: Audi, SEAT, Lamborghini, and Ducati. Volkswagen's brands mainly include: Volkswagen Commercial Vehicles, Volkswagen Passenger Cars, Skoda, Bentley, Bugatti, Porsche, Scania, MAN, and 8 other brands. 2. Volkswagen's domestic models include Jetta, Bora, Sagitar, Magotan, Phaeton, Santana, Zhijun, Passat, and Lavida.
13
2
Share

How to Open the Trunk of Toyota Prado?

Toyota Prado trunk opening methods are: 1. Pull up the trunk switch located at the lower left corner of the driver's compartment; 2. Use the key to open the tailgate, press and hold the middle button on the trunk to open it. Below are some details about the Toyota Prado: 1. Body dimensions: Length x Width x Height are 4820mm x 1885mm x 1890mm, wheelbase is 2790mm, fuel tank capacity is 70 liters, and luggage compartment volume is 1850 liters. 2. Engine: Equipped with a V6 1GR engine, maximum horsepower is 202kW, and maximum torque is 381Nm.
1
5
Share

How to Deal with Hydraulic Brake System Pulling to One Side?

Hydraulic Brake System Pulling to One Side can be addressed as follows: 1. First, perform the following visual inspections: check whether the tire pressure, tread patterns, and wear levels are consistent between the left and right wheels; inspect each shock absorber for oil leaks or failure; examine whether the suspension springs are broken or if their elasticity is uniform. 2. Lift the wheels and manually rotate and axially push-pull the wheel tires: if one side feels loose or too tight, readjust the bearing preload; if the wheel rotation is sticky or produces abnormal noises, inspect whether the wheel hub bearing is damaged or broken. 3. Bleed the brake system of the affected wheel: if no brake fluid sprays out, it indicates a blockage in the brake line, which should be replaced. If air is present in the expelled brake fluid, it means air has entered the brake line and should be purged. 4. Observe the brake clearance of the affected wheel: if the brake clearance is too large, it indicates severe wear of the brake shoe friction material or failure of the automatic adjustment device, which should be replaced.
8
0
Share

What is the mirror in the middle of the car called?

The mirror located between the driver and front passenger seats inside a car is called the interior rearview mirror. Its primary purpose is to allow the driver to check the situation behind the vehicle without changing their field of vision. Here are descriptions about rearview mirrors: 1. Based on different materials, they can be classified into aluminum mirrors, chrome mirrors, silver mirrors, and blue mirrors. 2. According to different mirror surface shapes, they can be divided into flat mirrors, spherical mirrors, and dual-curvature mirrors. 3. Depending on their functions, they can be categorized as auto-dimming rearview mirrors and manual anti-glare rearview mirrors. 4. Auto-dimming rearview mirror: An auto-dimming rearview mirror consists of a mirror, two photodiodes, and an electronic controller. When the sensor detects excessive brightness on the mirror, it darkens the mirror glass to reduce light reflectivity, effectively protecting the driver's eyes. 5. Manual anti-glare rearview mirror: A manual anti-glare rearview mirror typically consists of two mirrors with different reflectivity. The driver can switch between them using a lever to reduce light reflection.
9
4
Share

How to Unlock the Audio System in an Older Audi A6?

Here are the steps to unlock the audio system in an older Audi A6: 1. Turn on the radio, and the display should show 'safe'; 2. Simultaneously press the AF or FM and SCAN buttons until the display shows 1000, then release. Do not hold these buttons for too long or press them twice, otherwise 1000 will be entered as the password; 3. Use the first 4 preset tuning buttons to input the password provided by the owner. Use button 1 for the thousand-digit code, button 2 for the hundred-digit code; 4. After entering the password correctly, simultaneously press the AM or FM and SCAN buttons until 'safe' is displayed; 5. Release both the AM or FM and SAFE buttons at the same time. After a short wait, the radio frequency should appear on the display, indicating that the audio system is unlocked and ready for normal operation.
13
4
Share

What to Do When a Car Fails to Start After Wading Through Water?

Here are the steps to handle the situation: 1. Push the vehicle out of the deep water area to prevent it from remaining submerged. 2. If you have the skills to inspect and repair, you can remove the spark plugs yourself, manually cut off the fuel supply and ignition systems, and then use the starter to crank the engine, allowing the water inside to drain out. 3. Next, check all the fluids to see if they appear cloudy or foamy. If they do, replace them promptly. 4. If you are not skilled in self-inspection, contact a repair shop as soon as possible for professional maintenance and inspection. Preventing Engine Water Intake: 1. Even in shallow water, drive carefully in first or second gear at a low, steady speed to avoid splashing water into the engine, which could cause it to stall. 2. When driving through water, pass through in one go, avoiding gear shifts or sharp turns midway. 3. If another vehicle is wading ahead, do not follow closely to prevent being stuck if the leading vehicle stalls. 4. If the water level exceeds half the height of the tires, avoid wading through, as the exhaust pipe is typically at this height. Forcing passage could lead to water entering the exhaust pipe, severely damaging the engine.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.