···
Log in / Register

Where is the rearview mirror heating button located on the Buick Regal 552t?

4 Answers
QuinnFitz
08/29/25 4:33am

The rearview mirror heating button on the new Buick Regal is integrated with the rear window defogging and defrosting function button. Pressing the rear window defogger button will activate the rearview mirror heating function, which heats the mirror surface to remove fog and frost. Usage method: During rainy or snowy weather, press the rear window defogger button, and the indicator light on the button will illuminate. The heating element will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. As the temperature rises, water droplets on the surface will evaporate and gradually diminish, and fog will slowly disappear, allowing the driver to operate the vehicle more safely. How rearview mirror heating works: A heating element (heating film) is installed inside the mirror surface of both side rearview mirrors. When heating is activated, the heating wire generates heat to remove moisture. Since prolonged use of the heating function can damage the heating wire, the heating function will automatically turn off after a short period. If you wish to continue using it, simply turn it on again.

Was this review help?
7
0
Share
OAlexandra
09/11/25 2:21am

I've been driving a Buick Regal 552t for two or three years, and its rearview mirror heating function is quite practical. The button is located on the driver's side dashboard panel, usually sharing the same button with the rear window defroster. The button icon is a square with wavy lines—just press it once. On rainy or cold days, activating it quickly heats up the rearview mirrors to remove fog and rainwater, providing clearer visibility. I recommend turning it on before entering wet road sections for better effectiveness. Similar cars like Volkswagen also share the button design, but Buick's placement is closer to the steering wheel, making it more convenient to operate. Remember to check if the fuse is functioning properly; otherwise, the heating might fail. Regularly cleaning dust from the button can extend its lifespan and ensure safe driving.

Was this review help?
20
4
Share
Expand All
MacWalker
10/25/25 3:09am

When I first got my hands on the Buick Regal 552T, I couldn't find the rearview mirror heating button. Later, I discovered it's located in the air conditioning control area—the button with a wavy line, which doubles as the rear window defroster. The mirrors heat up within seconds after activation, helping me see vehicles behind clearly during rainy or foggy weather. As a new owner, I initially mistook it for a standalone switch and had to consult the manual to understand. Actually, many cars adopt this design—simple and convenient. I frequently use it during winter commutes and find the car's temperature control quite thoughtful, though it's best to avoid frequent toggling to save battery. Overall, the central console placement is intuitive and not complicated.

Was this review help?
20
1
Share
Expand All
Anthony
12/08/25 3:33am

The rearview mirror heating button for the Buick Regal 552T is located on the center console, shared with the rear window defroster. The icon is simple and easy to understand. I believe this feature is crucial for safety—it quickly removes fog during rain or snow, preventing blurred vision and accidents. Its central position makes it convenient to operate. It's recommended to maintain the button promptly to prevent malfunction.

Was this review help?
12
3
Share
Expand All
More Forum Discussions

How to operate the door auto?

The operation methods for the door auto are as follows: 1. Automatic air conditioning Auto switch: Press the Auto switch, and the air conditioning will automatically adjust the temperature and airflow inside the cabin. 2. Wiper Auto switch: Simply set the wiper to the Auto position, and the wiper can sense the size of raindrops through the rain sensor, then automatically adjust the wiper's operating speed. 3. Light Auto switch: The Auto switch with automatic headlights, when the light switch is set to the Auto position, the headlights can sense the changes in brightness around the vehicle through the light sensor. When the outdoor light becomes dim, the car headlights will automatically turn on. Similarly, when the outdoor light is bright enough, the car headlights will automatically turn off.
5
4
Share

Should New Cars Be Exposed to Sunlight?

New cars should not be exposed to sunlight. The following are the hazards of sun exposure: 1. Increase in harmful gases inside the car: Many people use the method of sun exposure to remove odors from new cars. This is because car interiors can release harmful gases like formaldehyde under high temperatures, which can be harmful to human health when inhaled. Although sun exposure can help these gases dissipate faster, it also generates a large amount of gases in a short time, which are difficult to remove and can have many negative effects on passengers if they remain in the car. 2. Increased safety hazards: Items with compressed gases and lithium batteries are prone to explode or burn under high temperatures. If people are inside the car at this time, it can cause unpredictable harm.
5
3
Share

Can National V Vehicles Be Licensed in Shenzhen?

After the implementation of National VI, National V vehicles cannot be licensed in Shenzhen. Here is the relevant introduction to National V: 1. Meaning: The National Fifth Stage Motor Vehicle Pollutant Emission Standard, referred to as the 'National V Standard,' has an emission control level equivalent to the European Union's fifth stage emission standard currently in effect. From National I to National IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. 2. Difference: Compared to the National IV standard, the new standard reduces nitrogen oxide emissions from light-duty vehicles by 25% and from heavy-duty vehicles by 43%.
2
1
Share

What is the EPS fault?

EPS is the electronic power steering warning light, indicating a fault in the electric power steering system. Its function is to use the power generated by the motor to assist the driver in power steering. The main components of the EPS system include the steering sensor, speed sensor, power assist mechanism, steering assist motor, and microcomputer control unit. The working principle of the electric power steering system is that the torque sensor is connected to the steering shaft. When the steering shaft rotates, the torque sensor starts working, and the relative angular displacement between the input shaft and output shaft caused by the torsion bar is converted into an electrical signal and sent to the ECU. The ECU determines the rotation direction of the motor and the magnitude of the assist current based on signals from the speed sensor and torque sensor, completing real-time control of the power steering.
19
3
Share

What is the bag called that covers a car?

The bag used to cover a car is called a car cover. Precautions for using a car cover: A car cover is not a completely fitted protective film; it will move relative to the car body, especially in strong winds. If you cover the car without washing it first, the car cover will rub against dust and tiny sand particles on the paint surface, similar to mild grinding, which can actually damage the car's paint. When not to use a car cover: According to the "Road Traffic Safety Law," vehicles parked illegally will be uniformly identified as "obstructing the license plate" if covered with a car cover. In addition to fines, the driver will also face a penalty of 12 demerit points.
15
5
Share

What are the reasons for high engine idle speed?

The reasons for high engine idle speed are: low temperature inside the cylinders and poor gasoline atomization. To meet the necessary combustion conditions, the electronic fuel injection system will require an increase in the concentration of the air-fuel mixture. As a result, the engine will raise the idle speed to increase fuel injection, thereby enhancing the concentration of the air-fuel mixture. Idle state refers to an operating condition when the engine is running without load. When the accelerator pedal is fully released while the engine is running, the engine enters idle state. During idle speed adjustment, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine. An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.