
The rear wiper switch of the Wuling Hongguang S is located at the lower right side of the steering wheel. Below are the specific details about the wiper: 1. Common sizes: The common sizes of car wiper blades correspond to the rubber strip length, with 14 inches being 350mm, 15 inches 375mm, 16 inches 400mm, 17 inches 425mm, 18 inches 450mm, 19 inches 475mm, 20 inches 500mm, 21 inches 525mm, 22 inches 550mm, 24 inches 600mm, and 26 inches 650mm. 2. Precautions: Since wipers are rubber products, it is best to replace them annually. If the wiper's water-clearing ability declines, it will be difficult to observe road conditions during rainy weather. Before using the wipers daily, clean the windshield to prevent sand particles on the glass from damaging the wiper blades and reducing their lifespan.

Ever since I started driving the Wuling Hongguang S ten years ago, I've gotten used to the rear wiper switch being located on the right-hand stalk near the steering wheel. There's a small rotatable or pushable knob near the top, usually marked with a raindrop or snowflake icon—just twist it to control the rear wiper. This feature is especially handy in rainy weather or when driving on muddy roads where the rear window gets dirty quickly. Keeping visibility clear by activating it promptly is crucial. I’d recommend new owners familiarize themselves with the switch while parked—don’t wait until you’re on the road in urgent need. Regularly check if the switch operates smoothly to avoid jamming or failure. The Wuling Hongguang S’s design is user-friendly, with a sturdy stalk that requires minimal effort to operate, though wear over time may necessitate occasional lubricant sprays to prevent rust. Also, if you’ve modified seats or added hanging accessories, ensure they don’t obstruct the stalk’s movement range.

When I first got my driver's license and bought the Hongguang S, I spent quite some time looking for the rear wiper switch. It turns out it's not a standalone button—it's located at the end of the right-hand stalk on the steering wheel. Just twist or push it upward to activate. The operation is intuitive, with clear icon markings and a lightweight feel. This switch is newbie-friendly; I recommend practicing a few times before rain to familiarize yourself with its position for a more confident drive. The rear window gets dirty quickly, especially on dusty roads or after snow, but a quick flick of the switch clears your view instantly, reducing blind spots while reversing. For , avoid excessive force to prevent damage, and keep the switch area clutter-free to prevent accidental activation. If it ever malfunctions, don’t panic—first check the fuse or consult the manual.

The rear wiper switch is typically located at the top of the right-hand stalk on the steering wheel, and it can be easily activated. Regularly check for signs of aging or poor contact.

I use the Hongguang S for commuting and cargo transportation. The rear wiper switch is conveniently located on the stalk to the right of the steering wheel, featuring a practical rotary knob design that quickly clears the rear window in rainy conditions with just a twist. Its ergonomic placement allows for easy operation without distracting from driving. The rear window is prone to mud splashes or frost, so timely activation of the switch ensures safety, especially during evening drives when visibility is low. It's recommended that owners keep the switch clean to avoid oil contamination and apply moderate force when operating. When parking, covering the wiper with a sunshade can help prolong its lifespan.

The rear wiper switch of the Wuling Hongguang S is located at the end of the right-hand control lever on the steering wheel, typically marked with a wiper icon, allowing quick and convenient rotation control. It proves highly practical in rainy or dusty conditions, instantly clearing rear window grime upon activation. With prolonged use, the switch may loosen; regular bolt tightening can prevent malfunctions. Its compact design ensures no interference with daily driving, though beginners are advised to familiarize themselves with its position first. If the switch becomes stiff, avoid forcing it—seek professional inspection of the circuit or component replacement instead.


