Where is the rear wiper switch for the Volkswagen Tiguan?

2 Answers
AvaLynn
07/25/25 2:03pm
The rear wiper switch for the Volkswagen Tiguan is located on the wiper lever on the right side of the steering wheel. Up and down controls the front wipers, while forward and backward controls the rear wiper. Wiper drive methods include mechanical, vacuum, pneumatic, hydraulic, and electric. Taking the 2017 Volkswagen Tiguan as an example, its body dimensions are: length 4506mm, width 1809mm, height 1695mm, wheelbase 2684mm, and minimum ground clearance 210mm. The 2017 Volkswagen Tiguan is equipped with a 1.8T turbocharged engine, with a maximum horsepower of 160PS, maximum torque of 250Nm, maximum power of 118kW, maximum power speed range of 4500 to 6200rpm, maximum torque speed range of 1500 to 4500rpm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
16
4
Share
LeAngelo
08/11/25 8:58pm
The rear wiper switch for the Volkswagen Tiguan is conveniently located on the stalk to the right of the steering wheel. As someone who appreciates technological details, I always pay attention to these small features while driving. Simply push the end of the stalk or rotate it to activate the rear wiper, with different modes available to adjust speed and washer fluid. It's especially useful in rainy or muddy conditions, keeping the rear window clean for better visibility. Volkswagen's design is consistently user-friendly, with well-thought-out placement that requires minimal effort. If unsure, it's advisable to check the manual first to confirm the settings for your specific model year, as some newer versions may have minor adjustments but generally follow this setup. Remember to briefly test the switch's responsiveness before each drive to avoid any inconvenience. Overall, the design is hassle-free, and as long as it operates smoothly, it's good to go.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What are the starting steps for the Accord?

Accord starting steps: Press the one-touch start button while stepping on the brake. If you press the one-touch start button without stepping on the brake, this is considered a partial power-on state where you cannot roll the windows up or down or play music. Pressing the one-touch start button a second time without stepping on the brake will fully power on the vehicle and initiate a self-check, allowing all vehicle functions to operate normally, but the vehicle still cannot be started. Pressing the one-touch start button a third time without stepping on the brake will completely power off the vehicle. In terms of body dimensions, the 2018 Accord measures 4893 mm in length, 1862 mm in width, and 1449 mm in height, with a wheelbase of 2830 mm. The gasoline models are all equipped with a 1.5T inline 4-cylinder turbocharged engine, available in high and low power versions, all paired with a CVT continuously variable transmission.
8
4
Share

What type of tire pressure monitoring device does the new Lavida have?

The new Lavida is equipped with an indirect tire pressure monitoring system. When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors tire pressure. The dimensions of the new Lavida are 4605 mm in length, 1765 mm in width, and 1460 mm in height, with a wheelbase of 2610 mm. The new Lavida offers two engine options: a 1.6L naturally aspirated engine and a 1.4TSI engine. For the transmission system, the 1.4T engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission, while the 1.6L model comes with a combination of a 5-speed manual and a 6-speed automatic transmission.
5
3
Share

Why does the engine malfunction indicator light come on when the car's air conditioning is turned on?

The reasons why the engine malfunction indicator light comes on when the car's air conditioning is turned on are as follows: Sensors: The engine malfunction indicator light will come on when the sensors are damaged, have poor contact, or experience signal interruption. Engine: Poor engine maintenance is the most common cause of the engine malfunction indicator light coming on. Therefore, it is recommended that car owners perform regular maintenance and maintain good driving habits, otherwise it will increase the burden on the engine operation. Poor quality fuel and engine oil: If not added as required, it will cause engine wear over time, leading to the engine malfunction indicator light coming on. Generally, manufacturers will recommend which grade of fuel and which type of engine oil to use.
9
1
Share

Is the Jialing 70 a two-stroke or four-stroke engine?

Jialing 70 is a four-stroke engine with chain drive. The relevant introduction of four-stroke engines is as follows: Definition of four-stroke engine: A four-stroke engine refers to an engine where the crankshaft completes one working cycle by rotating twice, going through four strokes: intake, compression, power, and exhaust. In contrast, a two-stroke engine only requires the crankshaft to rotate once and go through two strokes to complete a working cycle. Precautions for selecting engine oil: It is particularly important to remind that when purchasing, you should clearly communicate to the seller that you need four-stroke gasoline engine oil to avoid buying two-stroke engine oil or diesel engine oil.
4
2
Share

Why do the engine and oil lights come on simultaneously and the car won't start?

When the vehicle is turned off, these two indicator lights remain illuminated, which doesn't indicate any specific issue. If the vehicle fails to start, the following aspects should be checked: Battery voltage: Check whether the battery voltage is normal (starting voltage should be greater than 9.8V). Ignition coil inspection: Measure whether there is power supply, grounding, and signal at the ignition coil. Simultaneously, check for signal and power supply at the fuel injector (if there is no power supply, locate the corresponding fuse; if there is no signal, measure the crankshaft and camshaft sensor signals or the anti-theft system. First, use a decoder to read if there are any corresponding fault codes).
10
4
Share

What is the transmission fluid capacity in liters?

Generally, manual transmissions require 2-4 liters of fluid, while automatic transmissions need 6-8 liters. Here's more information about automotive transmissions: Transmission: A device that changes speed ratios and motion direction. Used in automobiles, tractors, ships, machine tools, and various machinery to alter torque, speed, and motion direction from the driving shaft to the driven shaft under different working conditions. Gear-type transmissions typically consist of a housing and multiple gears. Regular transmission inspection: Regularly check transmission fluid levels to ensure they remain within specified ranges. Top up as needed during operation, making sure to use the same type of fluid. When changing fluid, drain the old fluid while the transmission is operating and clean the system. Periodically inspect gear engagement to ensure optimal meshing conditions, clean components, and maintain proper gear-to-shaft alignment.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.