Where is the rear wiper switch for the GL8 located?

1 Answers
LeNova
07/30/25 3:12am
The rear wiper switch for the GL8 is located on the right-hand stalk of the steering wheel. Pushing the stalk forward or backward controls the rear wiper's on/off function and intermittent operation, and it can also activate the rear wiper's automatic washer fluid spray. The rear wiper refers to the wiper on the rear windshield of a vehicle, commonly found on SUVs, MPVs, hatchbacks, and some liftback models. Below is an introduction to the GL8: 1. The GL8's front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The ES variant features a multi-link independent rear suspension. 2. The GL8 boasts an exceptionally spacious interior, with dimensions of 5256mm in length, 1878mm in width, and 1776mm in height, along with a wheelbase of 3088mm. 3. The GL8 is equipped with a 2.0-liter turbocharged engine across all variants, delivering 260 horsepower and a maximum torque of 350 Nm. This engine reaches its peak power at 5400 rpm and achieves maximum torque between 2000 to 5000 rpm. It incorporates direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with a 6-speed automatic transmission (6AT).
Was this review help?
5
4
Share
More Forum Discussions

What are the reasons for the lack of elasticity in airbag seats?

The reasons for the lack of elasticity in airbag seats are: 1. The airbag has no air; 2. The airbag is leaking or blocked. The usage methods of airbag seats are: 1. Shock absorption limit wrench: In cases of poor road conditions and severe bumps, the limit wrench can be turned to secure the hook to protect the shock absorption system; 2. Slide adjustment handle: Lifting it upward can release the limit, allowing the seat cushion to move back and forth; 3. Front lifting handle: Lifting it upward can raise the front of the seat cushion, adjusting the angle and height of the cushion; 4. Rear lifting handle: Lifting it upward can raise the rear of the seat cushion; 5. Angle adjustment handle: Lifting it upward releases the limit, allowing the backrest angle to be adjusted.
7
4
Share

Where is the brake light switch for the Mazda Axela?

The brake light switch for the Mazda Axela is located under the brake pedal. Brake lights are generally installed at the rear of the vehicle, with the main body of the light being red to enhance the penetration of the light source. This ensures that vehicles behind can easily spot the vehicle ahead even in low visibility conditions. The Mazda Axela is a vehicle produced by Changan Mazda. The dimensions of this car are 4662 mm in length, 1797 mm in width, and 1445 mm in height, with a wheelbase of 2726 mm and a fuel tank capacity of 50 liters. The car is equipped with a 1.5L 117 horsepower L4 engine, paired with a 6-speed automatic transmission, delivering a maximum power of 86 kW and a maximum torque of 148 Nm.
16
5
Share

How to Disassemble the Volkswagen New Magotan Key?

Below are the steps to disassemble the New Magotan key: 1. Remove the emergency key from the car key. 2. Insert a flathead screwdriver approximately 3mm wide along the arrow direction into the emergency key's outer guide on the car key at about 12mm. 3. Turn the screwdriver clockwise until the cover pops up. 4. Push the battery compartment cover along the arrow direction and remove it. 5. Use a suitable thin tool to pry out the button battery from the battery compartment. 6. Place the new button battery and press it into the battery compartment against the arrow direction. 7. Position the cover and press it onto the car key housing against the arrow direction until it clicks into place.
9
1
Share

What are the reasons why the car air conditioner cannot be turned off?

Car air conditioner cannot be turned off due to: 1. The switch button of the car air conditioner is broken; 2. The thermostat of the car air conditioner is broken; 3. Switch contacts are stuck; 4. Switch circuit failure; 5. Poor switch contact. Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue and improving driving safety. Car air conditioning generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, with a relatively simple structure and easy operation.
13
5
Share

What is the center bore diameter (CB) of the Prado wheel hub?

The center bore diameter (CB) of the Prado wheel hub is 106.2. More information about wheel hubs is as follows: 1. Most wheel hubs have either 5 or 4 bolt holes, and the distance between the bolts varies. For example, 5X114.3 means the PCD of this wheel hub is 114.3mm, with 5 bolt holes. 2. When selecting a wheel hub, PCD is one of the most important parameters. For safety and stability, it is best to choose a wheel hub with the same PCD as the original vehicle for upgrades. 3. The center bore is the part used to connect and fix the wheel hub to the vehicle, which is the position where the wheel hub center aligns with the concentric circle of the wheel hub.
20
4
Share

What does 'outside' mean on tires?

In cars, 'outside' refers to the external temperature. Here is a detailed explanation of the external temperature: 1. When a car displays 'outside' followed by a number, it generally indicates the current external temperature. When the outdoor temperature is below 4 degrees, it alerts you that the external environment is cold, and there may be icy roads, reminding the driver to pay attention to driving safety and avoid sudden braking to prevent danger. 2. 'Outside' in a car refers to the external temperature, reminding that the outdoor temperature is lower than the interior temperature, and suggesting the driver to turn on the heater to prevent window fogging. 3. The external temperature sensor, also known as the ambient temperature sensor, is usually installed near the front bumper or grille. Its sensing element uses a negative temperature coefficient thermistor. The detection method for the external temperature sensor is the same as that for the coolant temperature sensor, and its resistance can be measured with a multimeter in resistance mode—the lower the temperature, the higher the resistance.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.