Where is the rear windshield wiper switch located?

2 Answers
LeDelilah
07/24/25 12:17pm
The rear windshield wiper switch is located on the control levers on either side of the steering wheel. The function of the wiper is to brush away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. The maintenance methods for the wiper are: 1. When using the wiper to remove dust from the windshield surface on sunny days, spray glass cleaner and avoid dry wiping; 2. Manually clean other stubborn or hard dirt on the glass; 3. When lifting the wiper blade, hold it by the spine and gently place it back; 4. In winter, use an ice scraper to remove ice chips from the windshield surface before using the wiper; 5. Repair any wiper malfunctions as soon as possible.
Was this review help?
8
0
Share
AubreyFitz
08/11/25 6:24am
I've been driving for over a decade and helped many new drivers locate their rear wiper switch. The position varies significantly by model: for SUVs like the Haval H6 or Tiguan, it's usually on the right-hand wiper stalk near the steering wheel—just twist the small knob at the end to activate the rear wiper. In sedans such as the Corolla, you might find a dedicated button on the center console. When it rains, stay calm—familiarize yourself with the stalk's position by touch before driving to avoid distracted searching. Some newer models feature touchscreen controls, where the rear wiper option lives in the display menu. Safety tip: Always check that the washer fluid functions properly, and promptly clear heavy rain from the rear window for optimal visibility.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What grade of gasoline should the Hongqi HS5 use?

The Hongqi HS5 should use 95-octane gasoline to meet the stability requirements of its engine during operation. The Hongqi HS5 is a mid-size SUV under FAW Hongqi, which also offers models such as the Hongqi H7, Hongqi L5, Hongqi H5, Hongqi HS7, Hongqi EHS3, Hongqi H9, and Hongqi EHS9. Taking the 2019 Hongqi HS5 as an example, its body dimensions are 4760mm in length, 1907mm in width, and 1700mm in height, with a wheelbase of 2870mm. The vehicle features a MacPherson strut front suspension and a multi-link independent rear suspension.
18
4
Share

Why does the hazard light fuse blow when turning on the right turn signal?

Turning on the right turn signal and blowing the hazard light fuse is caused by a damaged motor capacitor, excessive engine resistance, or prolonged high current due to the motor's inability to reach the required speed. If the tachometer shows normal readings while driving, but the speedometer displays zero and the ABS warning light is on, it indicates that the fuse corresponding to the ABS system has blown. In such cases, check the vehicle for any short circuits and contact the nearest service station for inspection promptly. The automotive electrical system connects numerous electrical devices with wires of different colors, among which the fuse (also known as a circuit breaker) plays a crucial role in protecting the circuit and electrical equipment.
6
2
Share

How is full synthetic oil represented by letters?

Full synthetic oil does not have a letter designation. The API of the oil only represents the oil grade, and there is no necessary connection between the oil grade and full synthetic oil. The SN grade is currently the highest grade, but SN grade includes both full synthetic and semi-synthetic oils. There are two labels for oil: one is SAE and the other is API. SAE is used to indicate the viscosity of the oil, while API is used to indicate the grade of the oil. API is the quality level of the oil as designated by the American Petroleum Institute. The API consists of two letters: the first letter is S for gasoline engines or C for diesel engines. If both S and C are marked, it means the oil is suitable for both gasoline and diesel engines.
2
3
Share

How to Remove the Dashboard of an 8th-Generation Civic?

The steps to remove the dashboard of an 8th-generation Civic are as follows: 1. First, insert a wooden pry tool into the gap above the Civic's dashboard to loosen the dashboard cover; 2. Remove the upper cover of the car dashboard, then continue using the wooden pry tool to loosen the air vents on the dashboard; 3. Once the Civic's air vents are removed, the dashboard can be fully disassembled. The Civic is a compact car produced by Dongfeng Honda, with body dimensions of 4517mm in length, 1799mm in width, and 1434mm in height, and a wheelbase of 2700mm. The vehicle features a MacPherson strut front suspension and a multi-link independent rear suspension.
12
1
Share

What material should be chosen for the engine guard plate?

Engine guard plates are generally made of hard plastic, resin, iron, and aluminum alloy. Among these, aluminum alloy guard plates offer a higher cost-performance ratio, being lightweight, high-strength, and affordable, making them a top choice for consumers. Plastic guard plates have low manufacturing costs and are among the lightest options, while plastic-steel and steel types are mostly used on high-intensity off-road vehicles. Installing such guard plates on ordinary sedans and urban SUVs may instead increase fuel consumption. Engine guard plates are custom-designed protective devices for engines based on various vehicle models. Their primary purpose is to prevent mud from covering the engine, and secondly, to avoid engine damage caused by impacts from uneven road surfaces during driving.
12
2
Share

How Should a New Car Be Broken In?

Methods for breaking in a new car: 1. Pre-warm the cold car; proper warm-up allows the engine oil to lubricate the engine internals. 2. When driving a manual transmission model during the break-in period, shift gears promptly and appropriately, avoiding incorrect behaviors such as high gear with low RPM or low gear with high RPM. Do not use a single gear for an extended period. 3. During the break-in period of a new car, ensure timely maintenance. 4. Pay close attention to the condition of the engine oil. The break-in period is a critical stage for the engine, as tiny metal particles generated by component operation may mix into the oil. Failure to change the oil promptly will increase engine wear. 5. Ensure the fuel added is within its shelf life.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.