···
Log in / Register

Where is the rear tow hook on the Jetour X70?

3 Answers
DonovanFitz
09/05/25 2:13am
At the front bumper of the vehicle, there is a small plastic cover. Use a flat-head screwdriver to pry it open, and inside is the installation position for the tow hook. Introduction to tow hooks: A tow hook generally refers to a vehicle tow hook, primarily used for towing purposes. Specifically: The English name for a vehicle tow hook system is Towbar. It is the towing and traction device of a vehicle, consisting of an installation fixed bracket (base crash beam), a spherical tow hook, and a towing power module. Towing precautions: The tow rope should generally be a specialized tow rope made of materials like cloth straps or steel wires, 3-10 meters in length, capable of bearing at least 2 tons of weight, which helps ensure smooth towing. Additionally, if the rear vehicle loses steering capability, a metal tow bar about 1.8 meters in length should be chosen to maximize stability during the towing process.
Was this review help?
12
4
Share
McNova
09/17/25 2:56am
The rear tow hook position of the Jetour X70 is generally located under the rear bumper or at the rear section of the chassis, which is exactly how my vehicle is designed. Squat down at the rear of the car and look at the very bottom of the rear bumper - there's usually a small plastic cover. Prying open this cover will reveal the tow hook socket or the hook itself. I've located it several times myself, and it's quite easy to find. It's advisable to first check the vehicle manual, as it contains detailed diagrams to avoid incorrect operations that could damage the car. On a related note, the tow hook mounting points require regular checks for loose screws, as rust can become problematic. Also, avoid overloading during towing to prevent chassis deformation. In summary, the position is easy to locate, but maintenance should never be neglected.
Was this review help?
9
5
Share
Expand All
JudahLynn
10/31/25 3:26am
The tow hook is hidden under the rear bumper when driving, and you can usually see a designed hole or a directly installed hook at the chassis connection. I've dealt with similar cars—crouch down to observe the rear, and don't miss the plastic covers; just pry them open. JETOUR X70 users can first check under the trunk mat for any hints. Important notes: The hook must be securely fastened, and if modifying the tow hook, use original factory parts to avoid significant towing risks. I also recommend checking in good lighting to avoid poor visibility in dim conditions. Never exceed the towing weight limit—safety comes first.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What does one long and two short horn blasts from a large vehicle mean?

The meaning of one long and two short horn blasts from a large vehicle is that the lead locomotive is requesting the assisting locomotive to push with idle force or to disconnect the main circuit breaker. Below is relevant information about large vehicle horn signals: 1. Large trucks are equipped with air horns: The horns on large trucks are different from those on cars. Cars typically have electric horns, while large trucks mostly use air horns. The function of air horns goes beyond just warning; if installed properly, their design can also serve as an elegant decorative element for the vehicle. However, their use should be avoided in urban areas as much as possible, as their loud volume can disrupt residents' living environment and affect the city's appearance. Misuse of air horns may lead to legal consequences in severe cases. 2. Large truck horns are louder: In daily life, the heavier the truck and the more cargo it carries, the longer its braking distance becomes, especially in rainy or snowy conditions. When a large truck honks its horn, it aims to alert pedestrians or other vehicles to take evasive action. Unlike cars, large trucks cannot brake as easily in emergency situations.
19
0
Share

What does the term 'naked car price' mean?

The naked car price refers solely to the price of the vehicle itself. Below is a detailed comparison between the naked car price and the on-road price: 1. Included costs differ: Naked car price: This is the price of the vehicle alone, excluding any additional fees. Typically, it is either the manufacturer's suggested retail price (MSRP) or the retail price minus any market discounts (sometimes, popular models may require a premium). On-road price: This encompasses all expenses incurred from purchasing the car until it is legally ready to be driven on the road (excluding loan interest if financing is involved). It includes various fees such as purchase tax, insurance, vehicle and vessel tax, license plate registration, etc. 2. Pricing standards vary: Naked car price: After the vehicle is handed over to the 4S store, the store determines the naked car price based on the manufacturer's suggested retail price. On-road price: Generally, the on-road price = naked car price + insurance + purchase tax + license plate fees, etc. If there is a mortgage loan, mortgage handling fees are also included.
17
5
Share

What's the Matter with the Car's High Temperature Warning?

Car high temperature alarm situations are as follows: 1. Circuit failure causes the electronic cooling fan not to rotate, reducing the radiator's heat dissipation capacity. 2. Check the operation of the electronic fan. Unplug the electronic fan's wire connector and power it directly with a power line. 3. If the electronic fan rotates, it indicates good working condition; if not, it indicates damage. Check the relay and its circuit condition. 4. If the fan rotates, the circuit is intact and powered, it indicates the relay is damaged or failed. 5. If all the above checks are good, it indicates the temperature sensor or its probe is damaged. The hazards of high temperature environment to the car are as follows: 1. When the car is running, the external temperature is high, and the tire heat dissipation is slow. Overheating can easily cause excessive air pressure, leading to tire blowout. The faster the speed, the more heat the tire generates, making blowout more likely. 2. The car's braking efficiency will decrease as the temperature rises. For cars with hydraulic braking, the brake fluid may produce vapor lock at high temperatures. 3. Under frequent braking conditions, the brake fluid temperature can reach above 100°C, easily causing the rubber cup to expand, brake fluid vapor lock, resulting in reduced braking efficiency and affecting driving safety.
5
1
Share

What to Do If the Volkswagen Tiguan Car Key Is Lost?

If the key to the Volkswagen Tiguan is lost, you can use the spare key or go to the 4S store to replace the remote key. Below is how the remote key works: 1. Active working mode: The principle is to control the car door through the vehicle's electronic control unit (ECU, Electronic Control Unit) and body control module (BCM, Body Control Management). Simply press the key button to send an unlock/lock command, and after verification by the vehicle's electronic module, the car door can be opened/closed. 2. Coil induction working mode: This mainly involves placing an encrypted chip inside the key. During the unlocking process, the vehicle's radio frequency transceiver verifies whether the key matches to determine if the engine can be started. This is mainly used in special cases when the key battery is dead, allowing the car to still start normally. 3. Passive working mode: When the owner enters the sensing area of the key system, as long as they touch the car door handle, the identity recognition "key" they carry will receive a low-frequency signal sent by the car. If this signal matches the identity recognition information stored in the "key," the "key" will be awakened.
18
2
Share

Where is the headlight switch on the Encore?

On the control lever under the steering wheel, usually on the left side. Pushing it up or down changes the beam. Here is some related information about car lights: 1. Car headlights: Also known as car front lights or car LED daytime running lights, as the "eyes" of a car, they not only relate to the owner's external image but are also closely connected with safe driving at night or under bad weather conditions. The use and maintenance of car lights should not be neglected. The car light switch is located on the control lever under the steering wheel, usually on the left side. Pushing it up or down changes the beam. The emergency light is either on the dashboard or in front of the steering wheel, usually red for visibility. 2. Other lights: The emergency light is usually near the center console, as the only red button, pressing it down activates the hazard lights. The fog light is usually on the headlight control lever with a fog light symbol. Rotating it forward turns on the front fog light, and rotating it backward turns on the rear fog light. The high beam and low beam are either on the turn signal or on the control panel. Switching between high and low beams is done by pushing the lever up or down (left and right for turning, up and down for beam adjustment). The emergency light is on the instrument panel, marked by two overlapping triangles.
12
2
Share

Will Motorcycles Be Caught Running a Red Light?

Running a red light will be captured by electronic surveillance because motorcycles are classified as motor vehicles. According to Article 2 of the "Scoring Standards for Road Traffic Safety Violations," running a red light results in a 6-point deduction and a fine. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to drive when the red light is on, prohibiting passage. Determining a red-light violation requires at least three pieces of photographic evidence: the vehicle has not left the stop line when the red light is on; the vehicle passes through the intersection when the red light is on; and the vehicle has crossed the line and continues to move forward when the red light is on. Common scenarios of running a red light: When the red light is on, the front wheel touches the stop line. If the vehicle stops immediately, it is not considered running a red light. However, if the vehicle continues to move, it will be counted as running a red light. According to Article 3 of the "Scoring Standards for Road Traffic Safety Violations," if the entire vehicle crosses the stop line and stops on the crosswalk after the red light is on, this is not considered running a red light but rather over-the-line parking, which results in a 3-point deduction. If the vehicle moves noticeably on the crosswalk or obstructs pedestrian passage, it will be judged as running a red light. If the front wheel crosses the stop line and then reverses back behind the line when the red light is on, this is considered illegal reversing, which also incurs a fine. If this causes a traffic accident with a following vehicle, the driver will bear primary responsibility. If the vehicle crosses both the stop line and the crosswalk to the opposite intersection after the red light is on, this is considered running a red light. Ways to avoid running a red light: Follow arrow signals if available; otherwise, observe the circular light. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light starts flashing, if the vehicle is close and moving fast, it should proceed, as braking may not stop it in time to avoid crossing the line. If the vehicle is far away, moving slowly, or the intersection is congested, it should stop. When driving in the city, develop the habit of looking for traffic lights whenever approaching a crosswalk, stop line, or intersection.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.