Where is the rear tow hook on the Haval H6?

1 Answers
Mackenzie
07/30/25 8:57am
Haval H6's rear tow hook is located under the trunk cover panel. Tow hook locations on other vehicle models: Many sedans have their tow hook mounting points designed under the bumper. The exact location is usually marked in the vehicle owner's manual. Owners can also identify hidden compartments by inspecting the front and rear bumpers - these areas covered by round or square caps indicate the tow hook mounting position. Towing precautions: For detachable tow hooks, ensure proper assembly to prevent detachment during operation and separation between the towing and towed vehicles. Avoid using rigid tow bars as they may bear excessive force. When using flexible tow ropes, avoid tying permanent knots and use releasable hitches instead. Maintain appropriate towing speed, preferably using low gear with high torque for safer operation since reduced speed significantly enhances safety.
Was this review help?
8
5
Share
More Forum Discussions

Does a new car require annual inspection in the second year?

According to regulations, new cars require annual inspection in the second year. The normal annual inspection process involves taking the vehicle to a testing station for checks (lights, tires, exhaust emissions, etc.), and then obtaining the inspection sticker after the vehicle passes the inspection. However, due to the "6-year exemption policy," the vehicle inspection part can be exempted, and you can directly apply for the inspection sticker. The relevant regulations for motor vehicle annual inspections are as follows: 1. Passenger vehicles for commercial use must be inspected once a year within 5 years; after 5 years, once every 6 months; 2. Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within 10 years; after 10 years, once every 6 months; 3. Small and micro non-commercial passenger vehicles must be inspected once every 2 years within 6 years; starting from November 20, 2020, for vehicles over 6 years but less than 10 years, the inspection cycle has been relaxed from once a year to once every 2 years, meaning private cars only need to undergo on-site inspection twice within 10 years, specifically in the 6th and 8th years. 4. For private cars over 10 years old, the original inspection cycle still applies, i.e., once a year for 10-15 years, and once every 6 months for over 15 years.
17
4
Share

What does the 3-year or 100,000-kilometer vehicle warranty mean?

The 3-year or 100,000-kilometer vehicle warranty means that during this period, if the vehicle encounters quality issues, the manufacturer will provide free repairs or replacements. Once the vehicle exceeds three years or 100,000 kilometers, it will no longer be covered by the warranty. Warranty conditions: Many automakers offer a 3-year or 100,000-kilometer warranty. If the vehicle is used for more than three years or exceeds 100,000 kilometers in mileage, it will no longer be covered by the warranty. During usage, whichever condition is met first applies. For example, if the vehicle has been used for three years but the mileage has not exceeded 100,000 kilometers, it is still considered out of warranty, and vice versa. Warranty coverage: The warranty period and mileage do not apply to all components of the vehicle. Different parts have different warranty durations. Components like the battery, wipers, and rubber-based equipment typically have shorter warranty periods. The 3-year or 100,000-kilometer warranty often refers to the vehicle's major components, such as the engine, transmission, and drivetrain. Warranty requirements: The 3-year or 100,000-kilometer warranty is a guarantee, but there are certain conditions for claiming it. The warranty only covers faults that are not caused by human damage. If the issue is due to personal misuse, the automaker will not handle it. Additionally, if the vehicle is not repaired at an authorized service center, the automaker will not be responsible.
15
3
Share

Can I Take the Subject 2 Test by Entering My ID Number?

Entering an ID number is not sufficient to take the Subject 2 test. If you have lost your ID card, you must obtain a temporary ID card in order to take the test. Preparation for the Subject 2 Test: Before getting into the car for the Subject 2 test, candidates need to make some preparations. Upon approaching the vehicle, candidates should first observe the test area. After entering the vehicle, quickly adjust the seat to a comfortable driving position and adjust the rearview mirrors. Once everything is properly set, fasten the seatbelt and, after all preparations are complete, scan your fingerprint to begin the test. Subject 2 Test Content: Drive the car to the stop line for the right-side reverse parking. Stop when your shoulder aligns with the stop line, then shift into reverse gear to begin the parking maneuver. When entering the parallel parking test area, use the raised part of the windshield wiper as a reference to follow the road edge line. Before entering the curve driving test area, position the vehicle slightly to the left as you approach the curve entrance. Drive through the curve and exit from the other end. Upon entering the right-angle turn area, determine whether it is a right or left turn. Before ascending the slope, maintain a 30 cm distance between the vehicle body and the road edge line and drive straight.
4
1
Share

Does deformed radiator fins have any impact?

If the radiator fins are deformed, it will affect the radiator's cooling capacity. Poor radiator cooling can lead to inadequate heat dissipation for the engine, potentially causing engine damage. Additional information: The arrangement of radiator fins follows a standard spacing, which allows air to pass between each fin to cool the antifreeze. If the radiator fins are bent, this spacing will be altered. If the spacing becomes too narrow, air cannot flow between the fins, thereby impairing the radiator's cooling performance. Therefore, it is necessary to repair and adjust the fins back to the standard spacing.
17
5
Share

What does transmission overheat protection mean?

Transmission overheat protection refers to when the temperature of the transmission fluid exceeds the vehicle's preset protection threshold, the onboard computer will automatically execute overheat protection measures and issue a warning. The following are the hazards of transmission fluid overheating: 1. Shortened service life: Overheating transmission fluid can cause significant harm, ranging from shortening the fluid's lifespan to severe damage to the transmission itself. Most transmission failures are caused by accumulated excessive oil temperature and inability to dissipate heat in time. 2. Risk of vehicle self-ignition: In more severe cases, it can lead to the transmission fluid boiling and being expelled through the vent, landing on high-temperature components such as the engine or exhaust system, potentially causing the vehicle to self-ignite.
11
3
Share

What is the reason why the BYD G3 cannot be turned off after one-key start?

BYD G3 cannot be turned off after one-key start, which may be caused by engine failure. Here is a detailed introduction about BYD cars: 1. Overview: BYD is a Chinese automobile brand founded in 1995, mainly producing commercial cars, family cars, and batteries. Starting with a team of just over 20 people, BYD grew into the world's second-largest rechargeable battery manufacturer by 2003 and established BYD Auto in the same year. 2. Others: BYD Auto's design not only draws on advanced international trends but also aligns with the aesthetic concepts of Chinese culture. The new BYD logo will no longer use the original blue and white color scheme; the pattern has been changed to an elliptical shape with added light and shadow elements.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.