Where is the rear tow hook on the Geely Vision?

2 Answers
VanMiguel
07/25/25 5:19pm
The rear tow hook on the Geely Vision is located on the left side under the trunk at the rear of the vehicle. You can see it by bending down. Below is some relevant information about the Geely Vision: 1. Power: The Geely Vision is equipped with 1.8L and 1.5L CVVT all-aluminum engines, featuring strong power, low fuel consumption, and low noise. This CVVT all-aluminum engine represents the highest level of domestic independent brand engines currently. 2. Body dimensions: The Geely Vision adopts an advanced and balanced overall layout concept with a long wheelbase and large body. The wheelbase is 2602mm, and the body dimensions are 4602*1725*1480mm, offering spaciousness and ranking among the top in its class of mid-size cars.
Was this review help?
16
3
Share
HectorMarie
08/11/25 10:07pm
The rear tow hook position of the Geely Vision is quite easy to find, located right in the middle beneath the rear bumper. Having driven this car for several years, I remember helping a friend tow something once. Upon closer inspection, there's a small cover at the bottom of the rear bumper—just gently pry it open to reveal the tow hook mounting point. If your model is newer, there might be a metal hook protruding directly. If you can't find it, check the vehicle manual; it will definitely have a detailed diagram explaining it. Don't underestimate this design—it's specifically engineered to handle the stress during towing and is covered to prevent corrosion when not in use. If you're towing heavy loads, always check the hook's sturdiness first and avoid using low-quality ropes, as they can easily detach and cause accidents. During maintenance, take a moment to clean off any rust to keep it in good working condition. In short, this little bit of knowledge can save you a lot of trouble and help you solve problems smoothly on the road.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

Yield to the Left or Yield to the Right?

When turning, vehicles turning right should yield to those turning left. The following are the right-of-way rules: Rule 1: When both vehicles are going straight, the vehicle coming from the right side of the road has the right of way, meaning the left-side vehicle yields to the right-side vehicle. Rule 2: When vehicles are coming from opposite directions, the vehicle turning right should yield to the one turning left. Additional information: Meeting oncoming traffic note 1: When meeting oncoming traffic, pay attention to the condition and movement of surrounding vehicles and pedestrians. If pedestrians are blocked by an oncoming vehicle, immediately sound the horn to alert them. Meeting oncoming traffic note 2: If meeting oncoming traffic on a road without a central guardrail, reduce speed and choose a wider section of the road to pass through slowly.
19
5
Share

What type of engine oil does the Roewe RX5 use?

Roewe RX5 uses 5w30 fully synthetic engine oil. The following is an introduction to the relevant content: The functions of engine oil are: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, shock absorption, and anti-wear. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase of 2700mm, and minimum ground clearance of 175mm. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, maximum torque of 250Nm, maximum power of 124kW, and is paired with a 6-speed manual transmission.
10
2
Share

Mercedes-Benz B200 Steering Gear Repair Cost?

The cost is approximately in the range of 2000 to 4000. Mercedes-Benz B200 Steering Gear Removal and Installation Method: Check if there are two holes under the steering wheel. If there are, insert a straight rod into them and push simultaneously to release. If there are no holes but bolts, use the corresponding hex key or similar tool. Reasons for Mercedes-Benz B200 Steering Gear Damage: After disassembly, it was found that the lubricating grease inside had completely deteriorated, and the internal bearings and related plastic components were worn out. Steering Gear Maintenance Methods: Avoid turning the steering wheel while the vehicle is stationary; try to steer only after the vehicle is in motion. When parking, return the steering wheel to the center position to prevent unnecessary load on the suspension system and tires. When making a U-turn, try to avoid turning the steering wheel to its extreme position.
6
5
Share

What are the reasons for the sudden increase in fuel consumption of the Baojun 530?

Engine carbon deposits, spark plug failure, and abnormal tire pressure can cause this. Specific reasons: Engine carbon deposits: During long-term operation of the vehicle, gasoline inevitably produces carbon deposits and sludge during combustion. If these deposits and sludge are not cleaned in time, they will lead to increased fuel consumption. Spark plug failure: The function of the car's spark plug is to use high voltage to generate sparks to ignite the air-fuel mixture. If damaged, it will reduce ignition energy, causing uneven combustion of the mixture, which will slow down acceleration and increase fuel consumption. Abnormal tire pressure: Incorrect tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tread is severely worn, the contact area between the tire and the road surface increases, leading to greater friction, increased rolling resistance, and naturally higher fuel consumption. Solutions: Clean engine carbon deposits, replace or clean spark plugs, and check and replenish tire pressure as needed.
12
4
Share

Is the BMW F900r Engine Produced by Loncin?

Production location: Berlin. Powertrain: The new F900R features a more sporty appearance and is equipped with a water-cooled, four-stroke, inline twin-cylinder, DOHC four-valve per cylinder engine upgraded from the F850GS platform. The engine has been expanded from 853cc to 895cc, with BMW claiming an output of 103hp. The compression ratio has increased from 12.7:1 to 13.1:1, and the crankshaft now has a 90-degree offset, firing at 270 and 450 degrees respectively to produce a sound similar to a 90-degree V-Twin. The new low-slung stainless steel muffler further enhances the engine sound. The six-speed transmission ensures smooth operation with its dual parallel shaft design. Two standard riding modes: Rain and Road modes, with the optional RidingModesPro (Professional Mode), which adds Dynamic and DynamicPro modes. Additionally, optional electronic aids include quick-shift, dynamic traction control, and cornering ABS.
8
5
Share

Can China V Vehicles Be Licensed in Baoding?

China V vehicles currently cannot be licensed in Baoding. The following is the specific process for vehicle licensing: 1. Pay purchase tax: Vehicle purchase tax must be paid, along with new car insurance and criminal investigation inspection. 2. Vehicle inspection: Non-exempt vehicles undergo line inspection, payment and form filling, number tracing and photo taking, and data collection to obtain licensing materials. You need to submit materials at the vehicle management office, sign as the owner, and have the vehicle inspected and confirmed by the police. 3. Install license plates: Choose a number and receive a receipt, fix the license plate, receive the vehicle license and registration certificate. 4. Temporary movement permit: The temporary movement permit is generally valid for 3 days, and the temporary license plate is usually valid for 30 days. The maximum period from purchasing a new car to officially licensing it is generally 3 months. If it exceeds 3 months, a certain late fee must be paid according to regulations. When to register the vehicle after purchase is entirely up to the owner.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.