···
Log in / Register

Where is the rear fog light fuse of Haval H6?

3 Answers
OArianna
07/29/25 10:06am
Located in the engine compartment, next to the battery. Press the latch and simultaneously lift the fuse box cover upwards to open it. Introduction to fog lights: Fog lights generally refer to automotive fog lights. They are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy weather, enhancing visibility for both the driver and other road users. Structure: In addition to the front high beams, low beams, headlights, and parking lights, and the rear running lights and brake lights, most vehicles also have a set of fog lights in inconspicuous locations at the rear. Rear fog lights are red signal lights installed at the rear of the vehicle to make it more visible to other road users in low-visibility conditions such as fog, rain, or dust. They emit a stronger light intensity than the tail lights.
Was this review help?
11
4
Share
MacEsther
08/13/25 12:54pm
The rear fog light fuse location on the Haval H6 is actually quite easy to find. I've driven this car for several years myself, and every time I check it, I have to open the driver's side door, bend down to look near the pedal area where there's a small plastic box, just below the left side of the steering wheel. That's the fuse box. After opening the cover, check the labels inside—they might have English markings like 'REAR FOG' or a number code like F20, which is likely for the rear fog light. However, the position might vary depending on the model year, so it's best to check the vehicle manual first to confirm. If you don't have the manual, use a flashlight to read the labels carefully—don't guess wrong. Replacing the fuse is simple: turn off the engine, pull out the bad one, and insert a new one, but make sure the voltage matches—usually around 10 amps. If the fuse keeps blowing, there might be a short circuit in the rear light wiring, so inspect the connections or sockets thoroughly; otherwise, the repair won't last. I've seen many similar cases where people ended up needing a 4S shop to fix it. Overall, regularly checking this box and related wiring can save a lot of hassle and prevent sudden issues during night driving.
Was this review help?
2
5
Share
Expand All
SanCorey
10/07/25 2:58am
As someone who frequently tinkers with cars, I've dealt with the rear fog light fuse of the Haval H6 several times. It's usually located in the cabin fuse box, specifically near the driver's left foot area. Just lift a small plastic cover to access it. Each fuse in the box is labeled, so look for the one marked 'Rear Fog Light' or check the numbering, such as F18 or F19, depending on the model. Remember to turn off the power before installation to prevent short circuits. Also, why does it blow? Common causes include bulb issues or moisture-induced wiring faults. It's advisable to check if the rear fog light socket is oxidized or loose, as these are hidden trouble spots. If replacing the fuse doesn't solve the problem, it might be a faulty relay or controller issue—don't push your luck in such cases; seek professional repair. During regular maintenance, take a few minutes to glance at the fuse box. Keeping the lighting system healthy is crucial, especially for safety during rainy or foggy conditions.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What transmission does the Peugeot 408 use?

Peugeot 408 uses Aisin brand transmission from Japan. Here is the related introduction of Peugeot 408 transmission: 1. Peugeot 408 has improved the transmission. The manual transmission adjusts the gear ratio while making the shifting action clearer and more engaging. The operating mechanism adds counterweights to make the shifting feel smoother, balancing fuel economy and driving pleasure. 2. The 4AT transmission has been upgraded with a more efficient torque converter, upgraded hydraulic system, and recalibrated shift control software. It has both automatic and manual modes (automatic mode is divided into economy, power, and snow modes, switchable via buttons). It incorporates uphill/downhill logic modes, divided into steep slope mode and gentle slope mode for gear control, enhancing safety.
5
2
Share

What colors are available for the Audi RS4?

Audi RS4 body colors include Nardo Gray, Navarra Blue, Mythos Black, Misano Red, Sonoma Green, Daytona Gray, Glacier White, and Floret Silver. Additional information about the Audi RS4: 1. The Audi RS4 is a mid-size car from Audi, with the new RS4 being an estate model. 2. The Audi RS4 is equipped with a powerful engine - a 2.9-liter twin-turbocharged V6 producing 450 horsepower and 600 Nm of torque. 3. The Audi RS4 features a five-link independent suspension at both front and rear. 4. This vehicle comes with a permanent all-wheel-drive system and uses a Torsen differential to enhance mechanical traction.
10
3
Share

What does AC mean in the air conditioning?

AC in the air conditioning refers to the air conditioning switch. Here is some information about AC: 1. Car air conditioning is divided into cold air conditioning and hot air conditioning. Hot air conditioning actually does not require turning on the air conditioning; you only need to turn on the blower to utilize the engine's heat for warming. On the other hand, cold air conditioning requires turning on the AC switch to activate the air conditioning compressor for cooling and producing cold air. Therefore, the AC switch is the start switch for cold air conditioning. 2. Mid-to-high-end car models often have an additional AUTO button, which stands for automatic air conditioning. When the AUTO button is turned on, the vehicle's computer automatically detects whether warm or cold air is needed through temperature sensors. For lazy people or beginners, automatic air conditioning can save a lot of setup trouble, making it convenient and quick to use.
14
5
Share

How to Use a Micrometer?

Here is how to use a micrometer: 1. Clean the surface of the workpiece to be measured and place it between the two anvils of the micrometer. Ensure the micrometer's spindle axis is perpendicular or parallel to the workpiece's centerline. Measuring at an angle will directly affect the accuracy of the measurement. 2. Rotate the thimble to bring the anvil close to the workpiece's measurement surface. Then switch to rotating the ratchet until it makes a "click" sound. The indicated value at this point is the measured size of the workpiece. 3. After measurement is complete, lower the thimble and remove the micrometer. 4. After use, clean the micrometer thoroughly, keep it dry, apply a thin layer of industrial vaseline, and store it in its case. 5. Avoid heavy pressure or bending the micrometer, and ensure the two anvils do not come into contact to prevent affecting the micrometer's precision.
10
2
Share

What is the ground clearance of the XRV?

XRV's ground clearance is 130mm when fully loaded, and can reach up to 142mm at maximum. Relevant information about the XRV is as follows: 1. In terms of appearance, the XRV measures 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. The XRV's exterior design follows the family-style design, exuding a strong sense of fashion and sportiness, incorporating many youthful design elements that align more with the aesthetic preferences of young people. 2. In terms of power, the XRV is equipped with two engines: a 1.5L and a 1.5T, paired with two types of transmissions: a 6-speed manual transmission and a CVT continuously variable transmission.
14
3
Share

Where is the fog light switch for the 2017 Mistra?

The fog light switch for the 2017 Mistra is located directly below the steering wheel. Rotate the middle wheel on the stalk: one turn activates the front fog lights, and two turns activate the rear fog lights. Here are specific details about the Mistra's fog lights: 1. The fog light assembly consists of a reflector, lens, bulb, shield, vertical light adjustment device, and housing. 2. The Mistra uses a combination switch, meaning all controls are on the stalk, which operates the car's low beams, high beams, front/rear fog lights, and marker lights. When the light switch is activated, an indicator will appear on the instrument panel. 3. The car's fog lights have strong penetration power and can be used in adverse weather conditions like fog, snow, or heavy rain to alert oncoming or following vehicles. Typically, front fog lights are yellow with downward illumination, while rear fog lights are red with parallel illumination. Front and rear fog lights are usually used together, and proper usage can effectively prevent accidents.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.