Where is the rear drainage outlet for the sunroof of the Audi A4?

When will the Highlander meet the China 6 emission standard?

China 6 Highlander was officially launched in June 2019. Below is the relevant introduction about China 6 emission: China 6 Emission Standard: The total hydrocarbons must reach 50mg/km, non-methane hydrocarbons must be reduced to 35mg/km, nitrogen oxides must be reduced to 30mg/km, and particulate matter must be reduced to 3.0mg/km. This means the carbon monoxide emissions, total hydrocarbons, and non-methane hydrocarbon emissions must be reduced by more than 50% compared to the previous standard. Models meeting China 6 emission: Acura CDC Hybrid, SAIC Roewe RX5, Infiniti QX50, K5 Kaiku, Ford Focus, etc.

6

1

Share

What are the contents of Driving Test Subject 3?

Subject 3 examination includes road driving skills test and safety & civilized driving knowledge test. Below are the detailed contents of Subject 3 examination: Road driving skills test contents: Include preparation before driving, light simulation test, starting, driving straight, gear shifting operation, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving. Safety & civilized driving knowledge test contents: Include safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.

2

3

Share

Should You Supervise the First Maintenance?

It is advisable to supervise the first maintenance of your car, as this allows you to observe the entire maintenance process. Below is relevant information about the first maintenance: Precautions for the first maintenance: Make an appointment in advance, bring essential items such as the maintenance manual and vehicle registration, and note down any issues or questions encountered during regular driving to inform the staff during the first maintenance registration. First maintenance items: Replace engine oil and oil filter, clean the air filter, check the generator belt and wiper blades for damage, inspect the levels of various fluids to ensure they are normal, check tire pressure for normal levels and look for signs of uneven wear, bulges, or damage, inspect the car's chassis including brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches, and check all switches and lights to ensure they are functioning properly.

1

5

Share

What is the fuel consumption of the manual Arrizo 5 in liters?

The manual Arrizo 5 has a fuel consumption of 7.66 liters per 100 kilometers. Below are the factors affecting fuel consumption and tips for saving fuel: Factors affecting car fuel consumption: Potholes on the road will increase fuel consumption. Driving for a long time in low gear will inevitably increase fuel consumption. Overloading the trunk with heavy items will also increase fuel consumption. Incorrect driving habits can double or even triple fuel consumption. Driving at high speeds in low gear will increase fuel consumption. Neglecting engine maintenance will also increase fuel consumption. Issues with the engine ignition system, such as inaccurate ignition timing, leaking high-voltage wires, or spark plug carbon buildup causing weak ignition, can reduce engine combustion efficiency and increase fuel consumption. Tips for saving fuel: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. A gentle start not only shortens the engine warm-up time but also effectively improves fuel utilization, thereby achieving fuel-saving effects.

6

3

Share

Is Running a Red Light Captured from Behind?

It is determined by capturing three photos with electronic cameras. The first photo shows the vehicle crossing the stop line at the intersection, including the red light signal and license plate number; the second photo shows the vehicle completely crossing the stop line, including the red light signal and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the position change of the vehicle in the second photo, including the red light signal and license plate number. Capturing these three photos can determine that the vehicle has run a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. The following points can help avoid running a red light: First, look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are allowed; when encountering an arrow signal light with a red right-turn arrow, right turns are prohibited, otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light; if the front wheels have just crossed the stop line when the light turns red, passage through the intersection is prohibited, and you must wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking; if the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. When the red light is on, right-turning vehicles may pass if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, and other special vehicles. If captured by surveillance cameras while yielding to special vehicles, the act of running a red light will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights. The photos capturing the violation may be blurry, and if you accidentally run a red light, the traffic police will not impose penalties. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, and 12 points may not be enough. After delivering the patient, the citizen can provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid traffic accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police. The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," when the yellow light flashes at an intersection, vehicles that have already crossed the stop line may continue to pass. If the yellow light is already on and you still rush to pass, it will be considered running a red light if captured.

17

2

Share

What causes the engine light to come on after an oil change?

When the engine warning light comes on after an oil change, you should first check the coolant temperature gauge and oil pressure warning light. If the coolant temperature gauge and oil pressure warning light are not activated (the needle-type coolant temperature gauge should read around 95 degrees), the car can still be driven, but you must pay attention to controlling the speed and drive to a repair shop for inspection promptly. Reasons for the engine warning light to illuminate: Poor combustion of air-fuel mixture: Issues such as faulty engine spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines can all lead to poor combustion of the air-fuel mixture. Poor combustion can cause engine carbon buildup or knocking, which is monitored by the engine's oxygen sensor. The warning light will illuminate after the issue is transmitted to the electronic control unit (ECU) as an alert. Sensor problems: These include sensors for coolant temperature, crankshaft position, air flow, intake temperature, oxygen levels, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, causing the engine warning light to come on. You should promptly take the car to a repair shop for inspection and repairs. Oil quality issues: The fuel added to the car usually has a specific rating, and engine oil can be categorized as semi-synthetic or fully synthetic. Manufacturers typically recommend the fuel rating and type of engine oil that owners should use. If the owner does not add the required specifications, long-term engine wear can occur, leading to the warning light illuminating. Carbon buildup issues: After a certain period of use, some carbon deposits will inevitably accumulate inside the engine. This can alter the engine's design parameters, and since carbon deposits are thermally unstable, heat accumulation can cause erratic engine ignition, leading to engine knocking. In such cases, the engine warning light will illuminate.

16

1

Share

Where is the rear drainage outlet for the sunroof of the Audi A4?

When will the Highlander meet the China 6 emission standard?

What are the contents of Driving Test Subject 3?

Should You Supervise the First Maintenance?

What is the fuel consumption of the manual Arrizo 5 in liters?

Is Running a Red Light Captured from Behind?

What causes the engine light to come on after an oil change?

Is the Lincoln MKC fuel consumption high?

Where Can You Generally Buy Static Cling Stickers?

What National Emission Standard Did Trucks Belong to in 2014?

What documents are required for registering an imported vehicle?