Where is the rear air vent located on the IZOA?

2 Answers
KendraFitz
08/26/25 5:20am
The rear air vent of the IZOA is generally installed behind the central armrest of the front seats. Power configuration of Toyota IZOA: The IZOA is equipped with the first TNGA 2.0L Dynamic Force Engine (2.0L Dynamic-Force-Engine), which achieves a world-leading thermal efficiency of 40%, delivering a maximum power output of 126KW and a maximum torque of 203N-m. Introduction to the interior of Toyota IZOA: The interior of the IZOA adopts the same new design as the overseas version of the C-HR, with an overall design approach that caters to a younger demographic. The dashboard is tilted towards the driver's side, and the black glossy piano lacquer trim enhances the premium feel of the interior.
Was this review help?
14
3
Share
MarleyDella
09/08/25 7:25am
The rear air vents of the IZOA are located on the rear wall of the front center armrest box, specifically in the central position directly in front of the rear seats. Based on my daily driving experience, this design is quite clever. When you turn on the air conditioning, simply rotate the airflow knob or press the button behind the armrest, and the air will blow out to help cool or warm the rear passengers. The position doesn’t obstruct the view and avoids direct airflow to the face, which can be uncomfortable. I particularly rely on it during long summer trips—friends in the back no longer complain about the unbearable heat. It works just as well in winter. The vents distribute air evenly and pair intelligently with the automatic climate control system. To maintain optimal performance, avoid blocking the vents with bags or clutter, and regularly wipe the vent surfaces with a damp cloth to prevent dust buildup and clogging. Keeping them clean extends the air conditioning system’s lifespan and enhances comfort.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How long should a bumper dry after painting?

Generally, it takes about one hour for the rear bumper to dry after painting. Quick spray painting can save time. The process and time for bumper touch-up painting: 1. Tools needed: water sandpaper, sponge, filler putty, scraper, spray paint, universal tape; 2. Inspection process: When you notice bumper damage, first get out of the car to check the specific location and then make a repair plan. 3. Cleaning step: Cleaning the damaged area prepares it for the next operation. Use neutral cleaning agents to ensure impurity-free repair; 4. Sanding process: Use 320-grit water sandpaper for the first sanding, continuing until the damaged area is smooth. 5. Second cleaning: This cleaning is to remove impurities from the sanding process, preparing for the next step; 6. Filler putty application: Apply the filler evenly within the sanded area. It shouldn't be too thick but can extend slightly beyond the damaged area. This step helps level the depression. Then wait for over two hours for the putty to dry.
5
2
Share

What is the function of the line on the rearview mirror?

This line on the rearview mirror is called a dual-curvature mirror. The glass on either side of the line has different curvatures: the larger inner portion has a smaller curvature and a narrower field of view, while the smaller outer portion has a greater curvature and a wider imaging range. Below are the functions of the rearview mirror line: 1. The outer section with a larger curvature is designed to reduce the driver's blind spot, effectively acting like a small convex mirror attached to the rearview mirror. 2. The two sides of this dotted line represent two different mirror surfaces with distinct curvatures. The line serves as a divider between these two curvatures. Positioned at the outer one-third of the mirror, the larger inner portion is a standard flat mirror that does not distort reflected objects, allowing the driver to clearly see conditions farther along the side of the vehicle.
14
0
Share

How to Activate One-Touch Window Roll-Up with the Haval H6 Key?

Haval H6 key one-touch window roll-up activation steps are as follows: 1. Switch the vehicle's ignition to ON mode. 2. Pull the window switch with the one-touch function past the pressure point until the window is fully closed, and hold for about 2 seconds. 3. Operate the window switch again to perform one-touch down and one-touch up once. More information about the Haval H6 is as follows: 1. The Haval H6 is positioned as a compact SUV, with dimensions of 4653mm in length, 1886mm in width, 1730mm in height, and a wheelbase of 2738mm; 2. The engine equipped in the Haval H6 delivers a maximum horsepower of 211Ps, a maximum power of 155kW, and a maximum torque of 325Nm.
7
4
Share

Should Mazda use 0w20 or 5w30?

Mazda can use either 0w20 or 5w30. More information about engine oil is as follows: 1. Engine oil refers to the specialized lubricant used in internal combustion engines, which also serves functions such as cleaning, rust prevention, and cooling. 2. Engine oil grades are classified based on quality and viscosity levels. Oil for gasoline engines is usually denoted by the letter "S", while oil for diesel engines is typically denoted by the letter "C". 3. Engine oil consists of base oil and additives, where base oil is the main component of the lubricant, determining its basic properties, and additives can compensate for the shortcomings of the base oil.
1
3
Share

How Long Does It Take for Alcohol Sprayed in a Car to Evaporate Completely?

Generally, alcohol sprayed inside a car takes about 10 minutes to evaporate completely. Below are specific details about using alcohol for car disinfection: 1. To achieve effective disinfection and sterilization, car owners need to use 75% concentration medical alcohol. If the alcohol concentration is too low, it will not be effective in killing germs. Alcohol molecules have strong permeability, allowing them to penetrate the surface membrane of bacteria, enter their interior, coagulate the proteins essential for bacterial life, and thus kill the bacteria. 2. Before using alcohol to disinfect the vehicle, car owners should turn off the engine and ensure the car is not in operation. It is also important to maintain proper ventilation inside the car. Since 75% alcohol has a flash point around 22°C and evaporates quickly, car owners must ensure there are no open flames nearby and be cautious with the amount of alcohol used to avoid high airborne alcohol concentration, which could lead to an explosion.
2
5
Share

Is Car Waxing Beneficial?

Car waxing has its benefits. It effectively protects the paint surface, keeping it bright and shiny, and can also repair scratched areas. Here are some relevant details: 1. Waterproofing effect. Under intense sunlight, each tiny water droplet acts like a convex lens. In the focusing effect, the temperature at the focal point can reach 800~1000°C, causing dark spots on the car paint, greatly affecting the quality and lifespan of the paint, and also making exposed metal surfaces prone to rust. Car wax repels water-based substances, making it difficult for water droplets to adhere to the car's surface. 2. High-temperature resistance. The principle behind car wax's high-temperature resistance is its ability to effectively reflect incident light from different directions, preventing reflected light from aging and discoloring the paint and base coat. 3. Anti-static effect. Static electricity can cause many inconveniences for drivers and even harm. The anti-static effect of car wax is mainly reflected in preventing static electricity on the car's surface. Its principle is that it can block the friction between dust and the metal surface. Due to differences in the thickness of the wax layer and the wax's own adhesion ability, the anti-static effect varies. Generally, anti-static car wax is better at blocking friction between dust and the paint surface than ordinary car wax.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.