···
Log in / Register

Where is the radiator of Wuling Rongguang S located?

3 Answers
Lilliana
07/29/25 1:16pm
The radiator of Wuling Rongguang is located behind the front grille of the bumper. There is a hood release lever switch at the lower left position of the dashboard in the cab. The following is an introduction to Wuling Rongguang: 1. Dimensions: Wuling Rongguang has a length of 4 meters, a width of 1620mm, and a height of 1915mm. Compared with traditional microvans (within 3.8 meters), its length, width, and height are all comprehensively increased. The large size brings a spacious interior, and Wuling Rongguang has larger passenger and cargo space than ordinary extended microvans. 2. Features: The size is the most notable focus of Wuling Rongguang and also the intrinsic value of the product. Compared to the simple lengthening of traditional microvans, the 'largeness' of Wuling Rongguang is comprehensive and truly 'large.' 3. Power: Wuling Rongguang is equipped with a new generation of small-displacement (1.2L) high-power B-series engine, boasting a leading power-to-displacement ratio advantage: 52.2KW/L.
Was this review help?
10
3
Share
VanJude
08/14/25 3:24am
I remember driving the Wuling Rongguang S for many years, and the location of the coolant reservoir is very clear—it's in the engine compartment. Open the hood, and from the driver's position, look toward the front left side near the windshield. There's a translucent white or green plastic tank with a cap usually marked with a thermometer icon or the words 'Coolant.' This is actually called the coolant expansion tank, which stores excess coolant to prevent engine overheating. Always check the fluid level when the engine is cold. The markings on the tank indicate the range between 'min' and 'max.' If the level is too low, the temperature gauge will alert you, and in summer, long-distance driving may cause the engine to overheat. It's recommended to replace the dedicated coolant every two to three years, and avoid mixing different colors to prevent corrosion. If you need to top it up in an emergency, use the manufacturer-recommended product, but it's best to wear gloves to avoid burns. Before driving, always take a quick glance to ensure the fluid level is normal—this can save you from costly repairs. The design is quite practical, allowing easy access without removing any parts, saving both time and effort.
Was this review help?
14
2
Share
Expand All
VanDaniella
10/10/25 2:06am
I noticed that the coolant reservoir of the Wuling Rongguang S is exceptionally easy to locate—it's positioned right under the hood, near the central-right side of the front end. When you pop open the engine bay, that translucent plastic tank is immediately visible, designed for effortless coolant level checks. Actually, this reservoir functions as an expansion tank, helping to stabilize pressure in the cooling system. Back when I was learning car maintenance, I tried topping up coolant myself—always on a cold engine, using the correct color-matched fluid (like green with green). Never open the cap when the engine's hot, or scalding steam could erupt. Pro tip: Regular level inspections prevent engine issues, especially critical during highway drives when overheating risks spike. The reservoir's placement near the radiator is pure engineering brilliance—maintenance couldn't be simpler. I even keep a small emergency bottle of coolant in the car for quick top-ups. Remember, coolant degrades fast; inspect hoses annually for leaks to safeguard engine longevity.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How many days after paying the purchase tax can you license a vehicle?

Purchase tax should be paid within two months, and the sooner it is paid, the better. There is no time limit for licensing. Objects of vehicle purchase tax: Vehicle purchase tax is levied on listed vehicles, and unlisted vehicles are not taxed. The scope of taxation includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles. Materials required: Copy of organization code (for institutional purchases) or ID card (for individual purchases); Tax payment copy of the "Unified Invoice for Motor Vehicle Sales" or "Customs Duty Payment Certificate" and "Customs Code Consumption Tax Payment Certificate"; Original and copy of the vehicle qualification certificate or "People's Republic of China Entry-Exit Inspection and Quarantine Import Motor Vehicle Inspection Certificate" (for imported vehicles); Original and copy of the technical parameter table for motor vehicle registration.
6
5
Share

What Causes a Fan Clutch to Fail?

Fan clutch failure can be attributed to the following causes: damaged bimetal temperature sensor, silicone oil leakage, or broken silicone fan drive pin. Details are as follows: Damaged Bimetal Temperature Sensor: When the bimetal temperature sensing port is damaged, the fan clutch cannot engage or disengage in response to the air temperature behind the radiator, remaining permanently disengaged. This results in engine overheating. Silicone Oil Leakage: Silicone oil serves as the primary transmission medium in the fan clutch. When leakage reaches a certain level, power transmission fails. Broken Silicone Fan Drive Pin: This causes the oil outlet valve plate to remain open under spring force, allowing silicone oil from the reservoir to continuously enter the working chamber. Consequently, the fan clutch remains engaged, leading to excessively slow engine warm-up.
9
1
Share

Can the Tire Pressure Monitoring System Be Installed by Oneself?

Tire pressure monitoring systems can be installed by oneself. However, if the original vehicle does not come with one, it is recommended that car owners go to a 4S shop or a repair shop for installation, as it provides more peace of mind with after-sales service guarantees. The functions of the tire pressure monitoring system and the method to eliminate alarms are as follows: Functions of the Tire Pressure Monitoring System: The tire pressure monitoring system not only alerts the owner when there is high pressure, low pressure, or high temperature in the tires, ensuring driving safety, but also helps owners save fuel and money, contributing to low-carbon and environmentally friendly driving. By continuously monitoring tire conditions, the system helps prevent tire blowouts and promotes fuel efficiency and environmental protection. Method to Eliminate Tire Pressure Alarms: Check and confirm whether the tire pressure is normal. If there are issues, adjust it to the standard pressure, then drive a few kilometers. Generally, the system will automatically reset at this point. If the tire pressure is confirmed to be normal, visit a car service shop to check the tire pressure sensors and clear any fault codes. If necessary, manually reset the system by locating the settings button on the central console.
7
1
Share

Is it okay to turn off an automatic transmission car without shifting to P gear?

You can turn off the car without shifting to P gear before shutting down the engine, but it may damage the transmission and engine. Here is some information about engine shutdown: 1. Introduction: Also known as flameout. Generally refers to the engine shutting down. 2. Operation: When the reactor is operating at a significant reaction rate, if the inlet temperature is lowered to the lower limit of the multiple-state region, the reaction rate will suddenly drop significantly, and the reaction will basically stop. This phenomenon is called flameout. The corresponding inlet temperature is called the flameout point. 3. Precautions: For beginners, stalling midway is not a new topic. The main solution is to improve driving skills after a quick break-in period.
11
3
Share

What do S and L mean in an automatic transmission?

S mode stands for Sport mode, and L mode stands for Low gear mode. Below is a related introduction to the various gears in an automatic transmission car: 1. P gear: This is the Parking gear, which uses a mechanical device inside the transmission to lock the rotating parts of the car. It must only be used when the vehicle is completely stopped. Additionally, when the car is turned off, the gear must be in P. 2. N gear: This is the Neutral gear, generally used for short stops. When in neutral, the right foot can leave the brake pedal to rest. However, on slopes, you still need to press the brake to prevent the car from rolling unless the handbrake or electronic brake is engaged. 3. D gear: This is the Drive gear. When in D gear, the driver only needs to control the accelerator pedal to adjust the speed. The transmission will automatically determine the appropriate gear based on the throttle input and vehicle speed, eliminating the need for manual gear shifting.
12
3
Share

What happens if you press the brake and rev the engine in an automatic transmission car?

Car won't move, and this can cause significant damage to both the engine and transmission, accelerating vehicle wear. Below is relevant information about the car throttle: 1. Function of car throttle: In gasoline engines, the throttle doesn't control fuel injection volume but rather regulates the throttle valve opening size. A smaller opening means less air-fuel mixture enters the cylinders, resulting in lower engine power output, and vice versa. 2. Solutions for stiff throttle: A stiff throttle can be addressed by cleaning the fuel system. Alternatively, try continuing acceleration to see if engine RPM increases without corresponding speed gain - if so, it might indicate a damaged sensor in the transmission locking the overdrive gear.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.