Where is the radiator of Geely Emgrand located?
2 Answers
Geely Emgrand's radiator refers to the water tank, which is located below the cooling fan. Open the engine hood, and the place with red coolant is the water reservoir. Follow the pipes from the reservoir to find the water tank. The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. The maintenance methods for the car water tank are as follows: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner. 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working. 3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure all fixing screws are loosened, and then slowly remove from both ends to the middle. Be careful not to break the fixing clips. 4. After ensuring the coolant temperature has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
The radiator of the Geely Emgrand is very prominently positioned at the front section of the engine bay. When you open the hood, you can immediately see it facing the rear of the front grille, where the design allows airflow to pass directly through to cool the engine. Having driven the car for five or six years, I’ve learned that regular radiator checks are crucial: I clean the grille during every car wash to prevent dust and leaves from clogging it, and I always ensure the coolant level is adequate—otherwise, overheating in summer becomes a risk. I also recommend installing a radiator protection mesh to guard against flying stones that could damage it. The placement is well-designed for easy maintenance, but always wait for the engine to cool down before working on it. Remember, poor cooling can degrade engine performance or even cause component failure, so maintenance is key.
