···
Log in / Register

Where is the radiator located on the Geely Emgrand?

4 Answers
Santos
07/29/25 1:09pm
Geely Emgrand's radiator is located beneath the cooling fan. When you open the hood, the container with red coolant is the reservoir, and the component connected to it via pipes is the radiator. The car radiator, generally referring to the heat exchanger, is part of the vehicle's cooling system. In the engine's liquid cooling system, the radiator consists of three main parts: the inlet chamber, outlet chamber, main plate, and radiator core. The Geely Emgrand is a compact car with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, featuring a wheelbase of 2650mm. In terms of power, this model is equipped with a 1.3T GeTec DVVT turbocharged engine, delivering a maximum power output of 98kW.
Was this review help?
2
1
Share
Morris
08/14/25 2:51am
I've been driving for many years and am quite familiar with the Geely Emgrand. To locate the coolant reservoir, you'll first need to open the front hood. It's generally positioned at the front-left or front-right side of the engine compartment, depending on the specific model configuration. The reservoir is a transparent plastic container filled with blue coolant, making it easy to check the fluid level. Its primary function is to dissipate heat from the engine and prevent overheating. Before driving, I routinely check if the fluid level is between the MIN and MAX marks. During summer when evaporation is faster, coolant levels drop more easily, so it's wise to keep spare antifreeze on hand for top-ups. Important safety note: After engine operation, components can be hot enough to cause burns - always wait at least 30 minutes for cooling before opening the reservoir cap. Proper maintenance significantly extends engine life and prevents roadside breakdowns. Adding coolant is straightforward - always use dedicated antifreeze and never tap water, which can corrode the system.
Was this review help?
1
2
Share
Expand All
StManuel
10/09/25 8:05am
For this car, the coolant reservoir location is quite straightforward. After opening the hood, look around the front area - it's usually positioned near the radiator or windshield, appearing as a transparent plastic tank with a cap. Its function is to maintain system pressure balance by storing coolant and prevent engine overheating. Regular checks are crucial since low fluid levels can easily cause malfunctions; I make it a habit to glance at it during every car wash. If you notice the fluid level dropping, it might indicate leakage or evaporation - promptly top it up with appropriate antifreeze to resolve the issue. Wearing gloves during operation is safer to avoid contact with hot liquid. The placement is quite user-friendly, and the owner's manual includes diagram references worth checking. Routine maintenance saves hassle and repair costs while ensuring peace of mind while driving. Once located on the Emgrand, adding coolant becomes simple and quick.
Was this review help?
5
1
Share
Expand All
SanBarrett
11/23/25 2:33am
The radiator of the Geely Emgrand is located in the front area of the engine compartment, and it can be easily seen when the engine hood is opened. Safety is the top priority: never touch the radiator cap when the engine is hot, as high-temperature liquid may spray out and cause severe burns. It's much safer to operate after it has cooled down. The location is not hard to find, but remember it contains coolant for the cooling system. If the fluid level is too low, the engine may be severely damaged, so regular checks are crucial. Especially in hot weather, evaporation is faster, so ensure the antifreeze is sufficient. The process is simple—wear gloves to prevent burns, and the fixed location means no worries. Maintain it well for more reliable driving.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to Deal with Glue Residue After Removing Window Tint Film?

Methods for handling residual adhesive from car window tint film are as follows: 1. The leftover adhesive from car window tint film can be wiped off using makeup remover oil or asphalt cleaner; 2. You can also use polyurethane thinner, commonly known as 811 cleaner, for wiping; 3. Lastly, another method is to use essential balm, which has fast volatile properties and low cost. Removing car window tint film requires certain steps and techniques, detailed as follows: 1. Peeling the film: First, lift a corner of the car window tint film, preferably using a fingernail or adhesive tape. If that doesn't work, consider using a blade to peel it. 2. Removing the film: With the help of hot air from a heat gun or hairdryer, use appropriate force and speed to slowly peel off the car window tint film. 3. Removing adhesive: If there is any residual adhesive from the glass film after peeling, clean it off with adhesive remover or cleaning agent.
1
2
Share

What are the causes of Camry idle vibration?

Camry idle vibration may be caused by the following reasons: 1. Severe engine carbon deposits - The most common cause of car vibration is dirty throttle valves or excessive carbon buildup in fuel injectors. When there's too much carbon deposit inside the engine, the gasoline sprayed by cold start injectors will be largely absorbed by these deposits; 2. Engine misfire - This mainly refers to one or more cylinders not working properly, manifested as: intermittent exhaust gas flow with noticeable exhaust pipe vibration, obvious engine vibration that can be felt, sometimes accompanied by "popping" sounds. This is mostly related to ignition coil failure; 3. Uneven air-fuel mixture in the engine can also cause idle vibration after cold start. The lower the temperature, the more fuel required for cold start, and the presence of carbon deposits will significantly affect whether cold start proceeds smoothly.
3
4
Share

Does idling the car with the heater on cause damage to the vehicle?

Idling the car with the heater on does not cause damage to the vehicle as long as the engine reaches its normal operating temperature. However, if the heater is turned on while the engine is still cold and has not reached its normal operating temperature, it can slow down the engine's warming process, leading to increased fuel consumption. Nevertheless, this does not harm the car. Below is some relevant information: 1. The fuel consumption when using the heater during idling depends on the car's displacement and engine tuning. For household cars, idling with the heater on for one hour consumes approximately 1 to 2 liters of fuel, though this may vary depending on the car model. 2. While idling with the heater on does not cause serious damage to the car, it can affect the passengers inside. Since the fuel does not burn completely during idling, carbon monoxide is produced. If the windows are not opened, the concentration of carbon monoxide inside the car can gradually increase, potentially leading to carbon monoxide poisoning for the passengers.
5
2
Share

Can I use my original license plate when changing to a new car?

When changing to a new car, you can retain your original license plate. For car owners who wish to keep their original plate, it is essential to ensure that the original plate has been used for more than one year. Only then will the plate be retained under the original owner's name during the transfer process. The retention period is one year. If the owner does not apply to reuse the plate within this period, it will automatically expire after one year, and the vehicle management office will reclaim the plate, making it unavailable for future use. The required documents for changing the car without changing the plate are as follows: 1. "Motor Vehicle Transfer or Registration Application Form"; 2. Original and copy of the owner's ID card; 3. Proof of vehicle purchase tax payment or tax exemption certificate, vehicle annual inspection certificate, and relevant documents submitted during vehicle registration; 4. Non-local residents also need to bring a residence permit and proof of the vehicle's origin; 5. For imported vehicles, additional documents include import certificates, vehicle whole-vehicle factory qualification certificate, and compulsory traffic insurance certificate.
7
5
Share

Should the tire pressure be the same for front and rear wheels of a sedan?

Front tire pressure and rear tire pressure can be different, but the difference should not be too large. Tire pressure is a range, not an exact value. In certain specific situations, it is more appropriate for the rear tire pressure to be higher than the front tire pressure. Below is relevant information: 1. For example, when the rear seats are fully occupied by three people and the trunk is also loaded with many items, the rear tire pressure should be higher than the front tire pressure. Higher rear tire pressure can make the car more fuel-efficient, resulting in lower fuel consumption. Additionally, the car can accelerate faster. The principle is: the higher the tire pressure, the smaller the contact area between the tire and the ground; the lower the tire pressure, the larger the contact area. 2. The front wheels are not only the driving wheels but also the steering wheels. If the front tire pressure is higher, the wear on the front tires will increase. Both the front and rear tire pressures must be within the standard range, and the difference should ideally not exceed 0.1bar.
18
5
Share

Is 0W40 Oil Suitable for All Seasons?

0W40 engine oil is considered all-season oil, but its suitability still depends on the temperature of the location where the vehicle is used. The 0W designation indicates the oil's cold-start performance—the smaller the number, the better the oil's cold resistance. Therefore, using 0W40 oil allows for easy engine starts even in cold weather. The number 40 represents the kinematic viscosity standard at 100°C (between 12.5mm²/s and 16.3mm²/s). Additional information: 1. In fact, many modern engine oils are designed for both winter and summer use, primarily depending on the oil's quality grade and performance. If the engine frequently operates under high-load conditions (accelerating oil consumption), it is advisable to use full synthetic or semi-synthetic oil. 2. As for quality grades, following the level specified in the vehicle's manual is generally sufficient for daily use. However, if the vehicle is often driven in congested urban environments, upgrading to a higher-grade oil (more environmentally friendly and economical) may be considered.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.