Where is the radiator located on the Chery Tiggo 3?

2 Answers
LeLane
07/30/25 12:08am
The radiator of the Chery Tiggo 3 is located in the engine compartment. When you open the engine hood, there is a round cap near the body side, which is for adding water, and the connected part is the radiator. The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. The radiator is an integral part of the car engine. In terms of body dimensions, the Chery Tiggo 3 measures 4420mm in length, 1760mm in width, and 1670mm in height, with a wheelbase of 2510mm.
Was this review help?
15
0
Share
DiMadison
08/16/25 4:08am
I usually drive a Chery Tiggo 3, and the radiator is located at the very front of the engine compartment. You can see it as soon as you open the hood, near the front of the car. It's typically a rectangular metal structure with a darker color and a blue coolant cap marking. The design places it next to the cooling fan to ensure smooth airflow for heat dissipation while driving. Before long trips in summer, I often check the coolant level to make sure there are no leaks or blockages, as these can easily lead to overheating and engine failure. When locating it for the first time, it's best to turn off the engine and let it cool for a few minutes—safety first. Avoid touching it when the engine is hot, as it can easily cause burns. The layout of the Tiggo 3 is quite standard, making the radiator easy to find—just below the front bumper of the engine. Once you're familiar with it, maintenance becomes effortless.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Will the Three-Way Catalytic Converter Be Damaged When a Vehicle Goes Through Water?

After a car goes through water, the three-way catalytic converter may be damaged. Therefore, it is advisable to press the accelerator a few times to expel water from the exhaust pipe, thereby protecting the exhaust pipe and the internal three-way catalytic converter. Lifespan of the Three-Way Catalytic Converter: The service life of a three-way catalytic converter ranges between 80,000 to 100,000 kilometers. The specific lifespan depends on the vehicle's usage conditions and is also related to the quality of fuel used and the driving environment. Components of the Three-Way Catalytic Converter: The three-way catalytic converter generally consists of four parts: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale from falling off, which could block the substrate. The vibration damping layer is composed of padding or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration, thermal deformation, and other factors, the padding is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is made of honeycomb-shaped ceramic materials, though many are also made of metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
18
0
Share

How many car brands are there in Germany?

There are more than a dozen car brands in Germany. Here is some relevant information about driving: Introduction to driving: Driving has become one of the essential skills for modern people. To master the skill of driving a motor vehicle, one must first meet the required age and physical conditions. Additionally, training and examinations on road traffic safety laws and regulations, basic knowledge of automobile mechanics, and safe driving practices are necessary. After passing these exams, training and testing on driving skills follow. Upon passing all examinations, one can obtain a driver's license for small cars or large/medium-sized trucks. Age restrictions for driving: Applicants for small cars, small automatic transmission vehicles, or light motorcycles must be at least 18 years old and under 70 years old.
1
4
Share

Can You Still Drive When the Coolant Temperature Warning Light Comes On?

No. The coolant warning indicates that the car's coolant is insufficient, or it may be an alert for an overheated radiator. In this situation, you must not continue driving. Prolonged operation may cause the engine temperature to rise further, leading to engine damage. To avoid unnecessary losses and ensure safety, driving should be halted immediately. Below are relevant details about coolant: Introduction 1: Coolant consists of three components—water, antifreeze, and additives. Based on the antifreeze agent used, it can be categorized into alcohol-based, glycerol-based, ethylene glycol-based, and other types of coolant. Introduction 2: The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine block during cold weather parking. Alcohol-based coolant uses ethanol as an antifreeze agent, offering advantages such as low cost, good fluidity, and simple preparation. However, due to its low boiling point and high evaporation rate, it is gradually being phased out.
4
1
Share

What Are the Basics of Automotive Electrical Circuit Repair?

Automotive electrical circuits typically consist of power supply circuits, starting circuits, ignition circuits, lighting and signal device circuits, and instrument information system circuits. Power Supply Circuit: Also known as the charging circuit, it is composed of the battery, generator, voltage regulator, and charging indicator device. Power distribution and circuit protection components can also be included in this circuit. Starting Circuit: This circuit includes the starter, starting relay, starting switch, and starting protection circuit. Devices for preheating during cold starts and their control circuits may also be part of this circuit. Ignition Circuit: This is a unique circuit for gasoline engine vehicles. It consists of the ignition coil, distributor, electronic ignition controller, spark plugs, and ignition switch. Microcomputer-controlled electronic ignition systems are generally categorized under the engine electronic control system. Lighting and Signal Device Circuit: This circuit includes headlights, fog lights, position lights, turn signals, brake lights, reverse lights, interior lights, and related control relays and switches. Instrument Information System Circuit: This circuit consists of instruments and their sensors, various warning indicators, and controllers.
16
4
Share

Will the car roll away if P gear is engaged without pulling the handbrake?

Engaging P gear without pulling the handbrake can cause the car to roll away. Below is relevant information about car driving: Introduction to car driving: Car driving has become one of the essential skills for modern individuals. To master car driving (driving-a-motor-vehicle) techniques, one must first meet the required age and physical conditions. Additionally, training and examinations on road traffic safety laws and regulations, basic automotive mechanical knowledge, and safe driving practices are necessary. After passing these exams, driving skill training and testing follow. Upon passing all examinations, one can obtain a driver's license for small cars or large/medium trucks. Age restrictions for car driving: Applicants for small cars, small automatic transmission vehicles, or light motorcycles must be at least 18 years old and under 70 years old.
2
2
Share

Why Do Domestic Cars Have High Fuel Consumption?

Domestic cars have relatively high fuel consumption, mainly due to technological gaps. More details are as follows: Engine fuel supply technology lags behind joint-venture brands: Direct injection technology is more fuel-efficient than multi-point fuel injection. Currently, most domestic cars primarily use single-point fuel injection, multi-point fuel injection, direct injection, and hybrid injection, especially single-point and multi-point fuel injection, which are more common. As a result, fuel consumption is higher. Engine valve control technology falls behind joint-venture manufacturers: Foreign brands dominate valve technology, while domestic brands use it less frequently. Domestic automakers lack well-known valve control technologies, and research in this area is relatively weak.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.