Where is the radiator located in the Volkswagen Touran?

1 Answers
Todd
07/30/25 6:35am
Volkswagen Touran radiator location: Open the engine hood, the fan is fixed above the radiator. You can see a coolant filling point with a cap on top - that's the radiator cap. Below is relevant information about the radiator: 1. The radiator is a crucial component of water-cooled engines. As an important part of the water-cooled engine's cooling circuit, it absorbs heat from the cylinder block to prevent engine overheating. Since water has a relatively high specific heat capacity, its temperature doesn't rise significantly after absorbing heat from the cylinder block. 2. The engine's heat is transferred through the liquid cooling circuit using water as a heat transfer medium, then dissipated through large-area cooling fins via convection, maintaining the engine at proper operating temperature.
Was this review help?
3
1
Share
More Forum Discussions

How many cans of undercoating are generally needed?

Generally, about 5 cans of undercoating are needed. Below is some relevant information about undercoating: 1. Introduction to undercoating: The formal name of automotive undercoating is automotive chassis anti-collision, anti-rust, and soundproofing coating ("UNDERCOATING" primer), a high-tech adhesive rubber asphalt coating. It is non-toxic, has high coverage and adhesion, and can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower panels, and trunk, forming a strong elastic protective layer after quick drying. 2. Functions of undercoating: Undercoating can effectively protect the chassis from road gravel impacts and prevent minor scrapes and friction; it prevents corrosion of the chassis metal plates by acids, alkalis, and salts; it prevents loosening of chassis screws; it reduces noise transmission during driving, enhancing driving quietness; and it blocks heat conduction from the chassis metal plates, keeping the cabin warm in winter and cool in summer.
6
1
Share

What is the difference between Intelligent Cruise Assist and Adaptive Cruise Control?

Intelligent Cruise Assist and Adaptive Cruise Control differ in the following aspects: 1. Functionality: Adaptive Cruise Control can follow the vehicle ahead, while standard cruise control cannot. This means that with standard cruise control, the vehicle maintains the speed set by the driver regardless of whether there is a vehicle ahead, whereas Adaptive Cruise Control not only has the functionality of standard cruise control but also maintains the vehicle's longitudinal movement. In the event of a collision risk, the vehicle will alert the driver and intervene with active braking, while standard cruise control relies solely on the driver's manual operation in emergencies. 2. Structure: Standard cruise control is relatively simple, lacking complex sensors and processors. In contrast, Adaptive Cruise Control includes radar sensors, digital signal processors, and control modules. If an image recognition module is added, it can essentially achieve autonomous driving. 3. Applicability: Adaptive Cruise Control is suitable not only for highway conditions but also for urban driving with stop-and-go traffic, whereas standard cruise control is only suitable for good road conditions, such as highways with light traffic.
20
4
Share

How to Set Lexus Seat Memory?

Seat power on, adjust the seat to your preferred position, and press the set button on the door side to complete the setup. Here are additional explanations: 1. Seat memory function: The seat memory function refers to the integration of the car seat with the vehicle's computer system, adding memory capabilities to the seat, enabling intelligent management of the driver's seat usage parameters. 2. Providing comfortable driving for the driver: For example, if the previous driver adjusted the seat to a certain position, the next driver may need to readjust the seat to ensure comfortable driving. In this case, the vehicle's computer will store the seat parameters used by the previous driver. When the previous driver needs to drive the vehicle again, simply pressing a button will restore the previously used seat parameter settings, which is the seat memory function of a car.
6
2
Share

How many digits does a vehicle identification number have?

Vehicle identification number (VIN) consists of 17 letters and numbers, which is the unique identifier of the vehicle and can be considered as the car's ID. The VIN is also known as the vehicle identification code. In addition to being visible on the vehicle registration certificate, the VIN can be found in several locations: the lower left side of the front windshield, on the engine, on the nameplate at the bottom of the B-pillar near the front passenger door, and on the vehicle chassis. The VIN is primarily divided into four parts. Positions 1-3 represent the world manufacturer identifier code; positions 4-8 represent the vehicle descriptor section; position 9 is a check digit that uses a specific algorithm to prevent input errors; and positions 10-17 represent the vehicle identifier section. The first, second, and third characters represent the country of manufacture, the manufacturer, and the vehicle type, respectively. The fourth digit indicates the vehicle category. The fifth digit represents the model series code, which is related to the manufacturer. The sixth digit indicates the body type (vehicle exterior) code. The seventh digit represents the engine type code. The eighth digit indicates the type of transmission equipped. The tenth character represents the production year, corresponding to the vehicle's model year. The eleventh character of the VIN indicates the vehicle's assembly plant, with "0" signifying original factory assembly. Characters 12 to 17 represent the production sequence number, indicating the order of the vehicle's production. This sequence number is used for vehicle recalls if necessary.
3
2
Share

What is the normal temperature range for an electric vehicle battery?

Electric vehicle batteries operate optimally within a temperature range of 0-40°C. Here are some key points about electric vehicle batteries: 1. Optimal battery temperature: Since the ideal temperature for battery cells is 0-40°C, temperatures that are too high or too low can affect cell activity and cause irreversible damage, potentially impacting battery lifespan. When charging an electric vehicle, if the battery temperature is below 0°C, it needs to be preheated before charging can begin, which prolongs the charging process and is not conducive to battery maintenance. 2. Battery usage precautions: During vehicle charging, as the battery pack temperature rises, significant temperature differences can trigger chemical reactions in the active materials on the positive and negative plates, thereby reducing battery life. Conversely, when battery temperatures are too low, the battery's storage capacity decreases, making it prone to over-discharge and consequently shortening battery lifespan.
10
0
Share

How to Determine Airbag Malfunction?

Here are the specific details for determining airbag malfunction: 1. Airbag warning light illuminates: If the airbag malfunction warning light turns on 6 seconds after turning the ignition switch or remains lit after turning off the ignition, there is a fault in the airbag warning light circuit. It should be inspected at a repair shop as soon as possible. 2. Insufficient battery voltage: Low battery voltage can cause the airbag malfunction warning light to illuminate. Once the battery voltage returns to normal, the airbag malfunction warning light will automatically turn off. In such cases, simply charging the battery is sufficient.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.