Where is the radiator located in the Volkswagen Lavida?

1 Answers
JasperMarie
07/24/25 5:28pm
The radiator of the Volkswagen Lavida is located at the front end of the car's front bumper. Here are some important notes: 1. The Lavida's radiator is covered by the engine radiator guard, and water should not be added to the radiator. 2. Adding water to the radiator is not permitted by the manufacturer. If adding water causes damage to the radiator or engine, it will not be covered under warranty. 3. Although water is also a type of coolant and can cool the engine, the coolant filled in the engine is a mixture of coolant concentrate and water in a specific standard ratio. 4. Plain water alone is considered a low-grade coolant, which is not only affected by seasons but also prone to scale and rust. In contrast, coolant is suitable for all seasons, of high quality, and ensures reliable performance.
Was this review help?
15
0
Share
More Forum Discussions

Where is the Changan Eado engine produced?

Changan Eado's engine is produced in Chongqing. The Changan Eado uses a 1.6L naturally aspirated engine and a 1.4L turbocharged engine. Here is some related information about the Changan Eado engine: 1. Engine working principle: It converts the thermal energy of gasoline into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston and perform work. Here is some related information about the Changan Eado: 1. Dimensions: Taking the 2020 Changan Eado as an example, it is a compact car with body dimensions of 4730mm in length, 1820mm in width, 1505mm in height, and a rear track width of 1566mm. 2. Power: The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 158PS, a maximum torque of 260Nm, and a maximum power of 116kW.
16
4
Share

What is the fuel consumption of the Infiniti Q50L?

The official combined fuel consumption (L/100km) is 9.7L/100km. Below are relevant details about fuel consumption: 1. Calculation Method: Vehicle fuel consumption is calculated based on the fuel consumed per 100 kilometers traveled (commonly referred to as 100 km). The actual fuel consumption calculation method is: Average fuel consumption = (Total fuel added - Last fuel added) / Distance traveled. Simply put, fill up the fuel tank, note the mileage (the vehicle can also record it automatically), run until half the fuel is consumed, then refill the tank. Before refueling, check the mileage to see how many kilometers were traveled, then divide the distance traveled by the amount of fuel added this time. 2. Smart Method: Another more intelligent method is: Press the corresponding button on the dashboard or steering wheel to switch and display the desired data, such as AVG for average fuel consumption (showing the vehicle's fuel consumption information over a certain period); A for total mileage; B for single-trip mileage.
7
5
Share

What does it mean when a vehicle's body-in-white rolls off the production line?

Vehicle body-in-white rolling off the production line marks the official start of mass production for a vehicle model. Body-in-white refers to the welded but unpainted vehicle body, excluding movable parts such as doors and hoods. After painting, the body-in-white is equipped with interior and exterior trims including the instrument panel, seats, windshield, carpets, interior panels, electronic and electrical systems such as audio, wiring harnesses, and switches. It is then combined with the chassis system, including the braking and suspension systems, and the powertrain system, comprising the engine and transmission, to form a complete vehicle. Vehicle production process: 1. Stamping process: Produces various body stamping parts; 2. Welding process: Welds various body stamping parts into a complete body; 3. Painting process: Prevents body corrosion and gives the body a beautiful appearance; 4. Assembly process: Combines the body, chassis, interior, and other parts to form a complete vehicle; 5. Inspection: Identifies potential quality issues during production and assembly.
6
0
Share

What does it mean to have a gecko on a car?

The gecko on the car symbolizes protection and safety, with the gecko emblem originating from Audi's Quattro four-wheel-drive system. Taking the Audi A4L as an example, here are the specific details of the Audi A4L: 1. Powertrain: The Audi A4L is equipped with a 2.0T four-cylinder turbocharged engine, delivering a maximum horsepower of 252 and a peak torque of 370 Nm. It weighs approximately 1.68 tons. The 0-100 km/h acceleration time is 6.6 seconds, paired with a 7-speed dual-clutch transmission. It features a front-engine four-wheel-drive layout with five-link independent suspension at both front and rear. 2. Features: The Audi A4L comes with tire pressure monitoring, ESP stability control, active braking, front and rear parking sensors, keyless start, keyless entry for the entire vehicle, and other functions. The 12.3-inch full LCD dashboard includes a rearview camera, GPS navigation, in-car Bluetooth, smartphone integration, voice control, and more.
6
4
Share

What is the fuel consumption per 100 kilometers for small cars?

Generally, small cars with a displacement around 1.6 liters will have a fuel consumption of about 6-8 liters per 100 kilometers. Below is extended information about fuel consumption: Factors affecting fuel consumption: Check whether the tire pressure meets the standard. If the tires are underinflated, fuel consumption will also increase. Check the degree of tire wear. If the tires are severely worn, slipping will frequently occur, increasing fuel consumption. If abnormal noises are found in the wheels during driving or starting, the bearings and braking system should be checked for faults in time. If the wheels do not rotate normally, it will affect the speed and increase fuel consumption. Calculation method of fuel consumption per 100 kilometers: X/100=50/600, where X is the actual fuel consumption per 100 kilometers, and the right side of the equation is the fuel consumption of 50L for a vehicle traveling 600 kilometers. Solve the equation, X=50×100/600. The answer is X≍8.33. Therefore, the actual fuel consumption per 100 kilometers of this car is about 8.33L.
13
3
Share

How to Get a Motorcycle License Without Knowing How to Ride?

Getting a motorcycle license is not difficult. The process is similar to obtaining a car driver's license, but it is less complicated and not as strict. Generally, you just need to memorize the test questions and familiarize yourself with the driving test rules to pass easily. Motorcycle license classifications: 1. Class D License: Allows you to drive three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h. It also permits driving two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h, as well as motorcycles with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less. 2. Class E License: With a Class E license, you can legally drive two-wheeled motorcycles with an engine displacement greater than 0.5L or a speed exceeding 50km/h. It also allows you to operate vehicles permitted under the Class F license. 3. Class F License: With a Class F license, you can legally drive lightweight motorcycles with an engine displacement less than 0.5L or a speed below 50km/h.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.