Where is the radiator located in the Sportage?

1 Answers
DeRylee
07/30/25 9:43am
The location of the radiator in the Kia Sportage: Open the front hood, and the pink liquid tank on the right side of the engine is the radiator for the Kia Sportage. It is positioned in front of the engine and behind the bumper. When adding water to the radiator, be cautious of high temperatures to avoid burns; it is best to refill when the engine is cold. More details are as follows: 1. The car radiator, also known as the heat exchanger, is a key component of the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. It is an integral part of the car engine. 2. The radiator is a crucial component of water-cooled engines, serving as a major part of the cooling circuit. It absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, the temperature rise after absorbing heat from the engine block is relatively small. Thus, the engine's heat is transferred through the coolant circuit, using water as a heat carrier to conduct heat, and then dissipated via large-area cooling fins through convection, maintaining the engine's optimal operating temperature.
Was this review help?
10
4
Share
More Forum Discussions

What is the reason for the abnormal noise when stepping on the brake in D gear of the new Teana?

There is abnormal noise when stepping on the brake in D gear because the ball joint under the gear is severely worn. The function of the ball joint: The ball joint, also known as a universal joint, refers to a mechanical structure that uses a spherical connection to transmit power between different axes. The universal joint is a very important component in a car. The combination of the universal joint and the drive shaft is called the universal joint transmission device. In front-engine rear-wheel-drive vehicles, the universal joint transmission device is installed between the transmission output shaft and the drive axle main reducer input shaft; while front-engine front-wheel-drive vehicles omit the drive shaft, and the universal joint is installed between the front axle half-shaft, which is responsible for both driving and steering, and the wheel. Reasons for ball joint wear: Poor working performance of the release fork shaft and too small clutch travel. Severe wear needs to check the corresponding ball joint movement position, no matter what type of ball joint is severely worn.
16
0
Share

Why can't the sunroof of the Audi Q5 close properly?

The reason why the sunroof of the Audi Q5 cannot close properly is: system operation issue, you can try repeatedly closing the sunroof while driving. The sunroof is installed on the roof, which can circulate air inside the car, increase the intake of fresh air, and also meet the needs of open views and mobile photography. The body dimensions of the Audi Q5 are: length 4753mm, width 1893mm, height 1659mm, wheelbase 2908mm, fuel tank capacity 73L. The Audi Q5 is equipped with a 2.0T turbocharged engine, with a maximum power of 140kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. It uses five-link independent suspension for both front and rear suspension.
2
4
Share

What is the validity period of Michelin tires?

Michelin tires have a validity period of 3 to 5 years. The functions of tires are: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Working together with the car suspension to mitigate impacts during driving and dampen resulting vibrations; 3. Protecting car components from severe vibrations and premature damage, adapting to the high-speed performance of the vehicle and reducing driving noise; 4. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability. The method to check the tire production date is: The specific production date of the tire is indicated in text on the tire sidewall, with the first two digits representing the week of production and the last two digits representing the year.
14
4
Share

How to Check if Car Headlights Are Original Equipment?

Methods to check if car headlights are original equipment: 1. Inferior headlights have poor reflectors, resulting in scattered and irregular light output; 2. Original equipment headlights feature deeply and evenly engraved markings, whereas non-original ones exhibit rough craftsmanship with more burrs on edges and inferior fitment compared to genuine parts. Car headlights, also known as automotive front lamps or LED daytime running lights, require the following maintenance: 1. Regularly inspect the headlight seals and replace damaged gaskets between the lens and reflector promptly; 2. Clean the reflector periodically and replace it if it turns black or light output diminishes; 3. Regularly remove dust and stains from the bulbs.
19
0
Share

Will the 11th-generation Civic's ground clearance increase?

The 11th-generation Civic's ground clearance will increase. Ground clearance notes: Active suspension can adjust the vehicle's ground clearance, while semi-active suspension typically adjusts the damping force of the shock absorbers. Based on road conditions, such as encountering potholes that cause the vehicle to bounce violently, the system can actively increase the maximum ground clearance to prevent the chassis from making contact with the ground. Chassis introduction: The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a vehicle. It supports and mounts the engine and other components/assemblies, forming the vehicle's overall structure, bearing engine power, and ensuring normal operation. The chassis consists of four parts: transmission system, running gear, steering system, and braking system. It forms the vehicle's overall structure, receives engine power to generate motion, and ensures normal driving.
14
4
Share

What Does Front-Wheel Drive and Rear-Wheel Drive Mean in Cars?

Front-wheel drive and rear-wheel drive in cars refer to: 1. Front-wheel drive means the engine is placed at the front of the car and drives the front wheels, which in turn propel the entire vehicle; 2. Rear-wheel drive means the rear wheels drive the entire vehicle. Methods to distinguish between front-wheel drive and rear-wheel drive cars are: 1. Check if there is a differential on the rear axle—if there is no differential, it is a front-wheel drive car; 2. If there is a differential on the rear axle, it is a rear-wheel drive car. Characteristics of rear-wheel drive include: 1. Improved balance and handling of the car; 2. Easier maintenance; 3. Insufficient traction; 4. Power generated by the engine is transmitted to the rear axle via the driveshaft, resulting in some power loss.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.