Where is the radar switch for the eighth-generation Camry?

1 Answers
HarperRose
07/30/25 4:38am
Shifting into reverse gear activates the reverse parking radar. The reverse parking radar utilizes ultrasonic principles during reversing. The sensors installed on the rear bumper emit ultrasonic waves that reflect off obstacles, calculating the actual distance between the vehicle and the obstacle, then providing feedback to the driver to make parking or reversing easier and safer. Below is relevant information about reverse parking radar: 1. Ultrasonic sensors: Their main function is to emit and receive ultrasonic signals. 2. Controller: Processes the signals to calculate the distance and direction between the vehicle and obstacles. 3. Display or buzzer: When the sensors detect that the vehicle is at a dangerous distance from an obstacle, the system alerts the driver through the display and buzzer.
Was this review help?
15
4
Share
More Forum Discussions

How Long Does It Take for the Color to Match After Touch-Up Paint on a White Car?

After touch-up painting, it takes about one month for the color to match. If there is a color difference after painting, and the color appears darker within one month, it might be because the paint hasn't fully dried yet. However, if the color remains darker after a month, it indicates an incorrect color match, and you should visit a 4S shop for a respray. Here are some suggestions regarding car touch-up painting: 1. If the primer is exposed, touch-up painting is necessary to prevent rusting and accelerated corrosion of the steel panel. 2. There will inevitably be some color difference after touch-up painting, which is usually noticeable only under strong light. This is because the original car paint fades due to sun exposure, resulting in a lighter or changed color. Computer-mixed paint cannot perfectly match the faded paint but can only come very close. 3. Over time, the color difference will become less noticeable, but it will always remain to some extent.
18
3
Share

Do I Need to Press the Auto Hold Button Every Time in the XRV?

It depends on the specific model. The auto hold function remains activated once turned on in some models, while in others, it requires manual activation every time the engine is restarted. Below is an introduction to the Honda XRV: 1. Powertrain: The Honda XRV is equipped with a 1.5T turbocharged engine that meets the National VI emission standards, with a maximum power output of 177 horsepower. The transmission system continues to pair with a 6-speed manual or CVT gearbox. 2. Design: The rear bumper of the Honda XRV is adorned with chrome trim, enhancing its refined appearance. For the exhaust system, the new model offers either dual exhaust outlets or a single exhaust outlet, depending on the variant. The interior design of the Honda XRV maintains the current style, featuring a simple dashboard layout with reasonably arranged functional areas.
10
3
Share

What is the Fog Light Symbol?

The front fog light symbol features three diagonal lines on the left, intersected by a curved line, with a semi-oval shape on the right. The rear fog light symbol shows a semi-oval shape on the left, with three horizontal lines on the right intersected by a curved line. Fog lights are typically used in conditions of reduced visibility such as foggy or rainy weather. Below is some information about fog lights: 1. Purpose: Fog lights are installed at the front and rear of a vehicle. They are used to illuminate the road and provide safety warnings during foggy or rainy weather. 2. Classification: Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually yellow, while rear fog lights are red. The symbol for the rear fog light differs slightly from the front fog light; the front fog light symbol has downward-pointing light lines, whereas the rear fog light symbol has parallel lines. These symbols are generally located on the vehicle's instrument panel. In foggy conditions, both front and rear fog lights are usually used together.
5
5
Share

Is Yamaha domestically produced or imported?

Yamaha has both domestically produced and imported models. The differences between domestically produced and imported vehicles are as follows: 1. The engine font is different: The engine number of an imported Yamaha motorcycle has a different font compared to a domestically produced one. Imported engines often start with letters, and there are no asterisks (*) at both ends of the engine number. 2. The frame number and engine number are different: For genuine imported Yamaha motorcycles, the frame number and engine number are unique. Sending the frame number to Yamaha's SMS platform can verify authenticity. For every vehicle Yamaha produces, the engine number and frame number are unique and correspond to each other, and they are uploaded to the national motor vehicle CD-ROM directory. When registering the vehicle at the vehicle management office after purchase, the manufacturer printed on the driving license issued by the office will match that of the genuine vehicle.
20
0
Share

Is the Vision Test Strict for Driver's License Physical Examination?

Is the Vision Test Strict for Driver's License Physical Examination? The vision test for driver's license physical examination is strict. The physical examination standards for obtaining a driver's license are as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the uncorrected or corrected visual acuity must be at least 4.9. 3. Color Vision: No red-green color blindness. 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. Applicants with hearing impairments who can meet the above conditions with hearing aids may apply for a driver's license for small cars or small automatic transmission vehicles. 5. Upper Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement. Applicants with missing fingertip segments or a missing right thumb may apply for a driver's license for small cars, small automatic transmission vehicles, low-speed trucks, or three-wheeled vehicles. 6. Lower Limbs: Both lower limbs must be intact with normal movement function, and the length difference should not exceed 5 cm. Applicants with a missing or non-functional left lower limb may apply for a driver's license for small automatic transmission vehicles. Applicants with missing or non-functional right lower limbs or both lower limbs who can sit independently may apply for a driver's license for specially modified small automatic transmission passenger vehicles for the disabled.
11
3
Share

How to Calculate the 30 Days from Subject 1 to Subject 3?

After passing Subject 1, you can schedule Subject 2 in 10-15 days. After passing Subject 2, you can schedule Subject 3 in 10-20 days. Below are the relevant details: 1. Article 41: For applicants of small cars, small automatic transmission cars, or small automatic transmission passenger cars for the disabled, Subject 3 can be scheduled 30 days after obtaining the learning driving permit. 2. Free Retake: Each subject allows one free retake if the initial attempt fails. If the retake also fails, the examination is terminated, and the applicant must reschedule. For Subjects 2 and 3, rescheduling is allowed only after 10 days, with a maximum of 5 attempts. If the 5th attempt still fails, all previously passed subjects will be invalidated, and the applicant must reapply for Subject 1.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.