Where is the QR code for OnStar Smart Rearview Mirror?

What Causes a Diesel Engine to Frequently Overheat and Boil?

Diesel engines frequently overheating and boiling can be attributed to the following reasons: 1. Increased oil level in the diesel engine oil pan: During operation, engine oil is normally consumed and gradually decreases. If the oil level does not decrease but instead rises, it indicates a fault in the diesel engine. The water seal ring between the lower part of the cylinder liner and the cylinder block is improperly installed, with excessive protrusion. Forcibly pressing it in can shear the water seal ring, causing coolant from the water jacket to leak into the oil pan. Long-term overload operation of the diesel engine can cause the engine to overheat, leading to heat-induced aging and deterioration of the water seal ring, resulting in water leakage. 2. Diesel fuel entering the oil pan: Diesel fuel entering the oil pan increases the oil level, dilutes the oil, reduces lubrication performance, and accelerates component wear or causes bearing seizure. If the needle valve assembly of an individual cylinder's fuel injector is stuck or the injection pressure is too low, a large amount of unatomized diesel fuel is injected into the cylinder, failing to completely combust and flowing into the oil pan in liquid form along the cylinder walls.

17

2

Share

What is the difference between vehicle body crossing the line and pressing the line?

Pressing the line refers to all horizontal and vertical solid lines in the test area, and the vehicle's wheels must not press on them. If the line is pressed, 10 points will be deducted. Vehicle body crossing the line means that the body of the motor vehicle exceeds the boundary line, which will result in a failed test and a direct deduction of 100 points. Below is an introduction to Subject 2: 1. Introduction: Subject 2 for motor vehicles is also known as the small road test, which is a crucial part of the motor vehicle driver's license examination, focusing on the test of field driving skills. 2. Test content: Subject 2 for motor vehicles includes five test items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. For large vehicle driver's license tests, additional test items may be appropriately included.

2

4

Share

What are the requirements for Didi Chuxing driver recruitment?

To join as a Didi driver, the following conditions must be met: 1. Driving experience: At least 1 year of actual driving experience, a C1 (or above) driver's license, familiarity with local roads, and good driving habits. 2. Appearance: Presentable, in good health, with no obvious scars or tattoos on exposed skin, no eccentric hairstyles (or colors), and no infectious diseases. 3. Language: Standard Mandarin, with preference given to those who understand foreign languages (basic conversation is sufficient). 4. Age: Men aged 22-55, women aged 22-50, with no criminal record, no history of mental illness, no drug abuse history, no traffic violations resulting in 12 penalty points, no major accidents within the last three years, and no bad habits.

6

3

Share

How to Check the Points for Passenger Cars?

Passenger car points can be checked through the Beijing Local Treasure official account. Below is an introduction to the knowledge about passenger car points: 1. Introduction: If a family applicant is currently participating in the ordinary passenger car license plate lottery, the step points = 1 point added for each step accumulated. 2. Family total points calculation: If the family applicant includes the spouse of the main family applicant, the family total points are calculated according to the following formula: Total points = [(Main applicant's points + Spouse's points) × 2 + Sum of other members' points] × Family generation number. If the family applicant does not include the spouse of the main family applicant, the family total points are calculated according to the following formula: Total points = (Main applicant's points + Sum of other members' points) × Family generation number (Family generation number refers to the number of generations included in the family applicant, with a maximum of 3 generations).

11

2

Share

What grade of gasoline should be used for the Volvo S90?

The Volvo S90 should use 95-octane gasoline. This gasoline grade is recommended in the official vehicle manual for this car. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also be marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline should be chosen. However, with the use of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower-octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Volvo S90 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, accidentally using higher-octane gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If combustion occurs before the spark plug fires during the compression stroke, resistance will arise in the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise and does not significantly damage the engine. However, if noticeable knocking occurs, it indicates severe engine conditions. The vibration not only affects driving stability but also causes abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring.

5

2

Share

What causes the ABS light to illuminate in a car?

ABS light illumination can occur in various states, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and calculating the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections between system wires or poor contact of the ABS relay, leading to system failure. Solution: Inspect wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and voltage rises, the ABS indicator turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wire connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is illuminated, it is advised not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

2

5

Share

Where is the QR code for OnStar Smart Rearview Mirror?

What Causes a Diesel Engine to Frequently Overheat and Boil?

What is the difference between vehicle body crossing the line and pressing the line?

What are the requirements for Didi Chuxing driver recruitment?

How to Check the Points for Passenger Cars?

What grade of gasoline should be used for the Volvo S90?

What causes the ABS light to illuminate in a car?

Which country is Mercedes from?

What Causes a Car Wiper to Jerk?

Parking Brake and Gear Shifting Sequence?

How to Resolve the Volvo ESC Warning Light?